Folding Community Board

[marknd59]

11 minutes ago, Favebook said:

Not as far as I know. Also why would you want that? It's so much easier this way, and you can add as many dots as you want.

I just find it easier to type in the numbers I want like 50- 50%, 60-55%, 65-65%. I just find it's easier that way.

[LandJ]

maybe this article helps?

 

https://forums.guru3d.com/threads/afterburner-settings-backup.318723/

[marknd59]

14 minutes ago, LandJ said:

maybe this article helps?

 

https://forums.guru3d.com/threads/afterburner-settings-backup.318723/

Thanks that was what I was looking for but it looks like I can't do what I want not unless I can figure out what this means.

 

 

Spoiler

SwAutoFanControlCurve=0000010008000000010000000000000000000000000048420000484200006C42000082420000824200008C420000884200008E4200008C4200009642000096420000B4420000A0420000C842000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

 

[LandJ]

3 hours ago, marknd59 said:

Thanks that was what I was looking for but it looks like I can't do what I want not unless I can figure out what this means.

 

 

  Hide contents

SwAutoFanControlCurve=0000010008000000010000000000000000000000000048420000484200006C42000082420000824200008C420000884200008E4200008C4200009642000096420000B4420000A0420000C842000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

 

That's the location to the entrance of area 51. Don't let anyone else know.

[marknd59]

Is everyone getting these kinds of difference in PPD on project 13420 ?

 

 

[RollinLower]

56 minutes ago, marknd59 said:

Is everyone getting these kinds of difference in PPD on project 13420 ?

not sure, tough i'll be on the lookout of those WU's.

right now i only have some 16600's running.

[chaozbandit]

2 hours ago, marknd59 said:

Is everyone getting these kinds of difference in PPD on project 13420 ?

 

 

 

 

Yep, reckon its because there are many designs under this project so the atom count varies.

 

 

[NetoriusNick]

Multi system management software, like in the previous post there are other management softwares than the default management software by FAH, anyone one have any recommendations?

[GOTSpectrum]

1 hour ago, chaozbandit said:

 

Yep, reckon its because there are many designs under this project so the atom count varies.

 

 

You are precisely right, due to the nature of COVID Moonshot(Looking at many different FDA approved drugs) WUs the atom count and complexity of the WUs vary significantly. The variability has actually been reduced, when the WUs were in early beta the delta from the worst to the best unit was around 70% 

[GOTSpectrum]

4 minutes ago, NetoriusNick said:

Multi system management software, like in the previous post there are other management softwares than the default management software by FAH, anyone one have any recommendations?

HFM.Net is the way to go, although I believe this is limited to windows systems

[marknd59]

53 minutes ago, NetoriusNick said:

Multi system management software, like in the previous post there are other management softwares than the default management software by FAH, anyone one have any recommendations?

Here you go -

 

 

[Captainmarino]

13 minutes ago, marknd59 said:

Here you go -

 

 

I'm STILL trying to get this to work. I've got two other machines on my home network and neither of them wants to connect to my main rig.

[GOTSpectrum]

1 minute ago, Captainmarino said:

I'm STILL trying to get this to work. I've got two other machines on my home network and neither of them wants to connect to my main rig.

can you ping the other systems? if not it will most probably be windows firewall issue 

[Captainmarino]

That'll be next on my list of things to check. Thanks for the suggestion. You know, there's times when you forget to check the simple things in the beginning

[GOTSpectrum]

9 minutes ago, Captainmarino said:

That'll be next on my list of things to check. Thanks for the suggestion. You know, there's times when you forget to check the simple things in the beginning

I have a degree in networking(Flex; I know) and that is pretty much the best I can advise off the bat...

 

In my defence haven't worked in IT since I was 17... I just enjoy my current job so much I don't mind the reduced money. Especially with my health being the way it is. 

[Captainmarino]

6 minutes ago, GOTSpectrum said:

I have a degree in networking(Flex; I know) and that is pretty much the best I can advise off the bat...

 

In my defence haven't worked in IT since I was 17... I just enjoy my current job so much I don't min the reduced money. Especially with my health being the way it is. 

Enjoying life with less money is still enjoying life.

[Kilrah]

5 hours ago, marknd59 said:

Is everyone getting these kinds of difference in PPD on project 13420 ?

Yes, the moonshot WUs can vary wildly.

[justpoet]

8 hours ago, Captainmarino said:

I'm STILL trying to get this to work. I've got two other machines on my home network and neither of them wants to connect to my main rig.

I actually cheat a lot with mine.  I run my Linux boxes from my Mac client.

Step 1) set up linux to allow for the "remote" connection in the client.  Don't actually open any ports for it though.

Step 2) Make sure ssh works to the linux box from whatever system you want to use to do the control…which since it is linux, this probably already works, because you cared to set it up before.

Step 3) ssh into linux box with port forwarding:

ssh user@machine -L <port:localhost:port>

Step 4) Add localhost on that port to the F@H app.

[NetoriusNick]

11 hours ago, marknd59 said:

Here you go -

 

 

I got this working just not fond of the interface very much hence asking about other programs other than the FAH stock one 

[marknd59]

I have a love/hate relationship with project 13420. I now have 4 of the good WU running that are showing a est. PPD of 6.1M PPD. It seems to be taking them some time to get the points fine turned on this project.

[Captainmarino]

9 hours ago, justpoet said:

I actually cheat a lot with mine.  I run my Linux boxes from my Mac client.

Step 1) set up linux to allow for the "remote" connection in the client.  Don't actually open any ports for it though.

Step 2) Make sure ssh works to the linux box from whatever system you want to use to do the control…which since it is linux, this probably already works, because you cared to set it up before.

Step 3) ssh into linux box with port forwarding:

ssh user@machine -L <port:localhost:port>

Step 4) Add localhost on that port to the F@H app.

I tried off and on for months trying to get F@H set up on with linux on my old media server box but had to give up. That box has been nothing but trouble to get up and running. First, it's in my basement and there's no internet down there. I ended up using an old cell phone in tether mode as a wi-fi adapter. Second, it didn't work well with the R9 280 I have in there. I ended up just installing Windows and leaving it unregistered.

 

It's folding away now but I would like to be able to monitor it (and my wife's covertly ambushed work computer) from my main rig

 

I'm going to try to ping them tonight to make sure that part's working ok and then move on from there.

[Kilrah]

You're not going to be able to if you use a phone as "wi-fi adapter". 

[Captainmarino]

40 minutes ago, Kilrah said:

You're not going to be able to if you use a phone as "wi-fi adapter". 

Yeah, I figured as such. I was going to focus on my getting my wife's computer to be monitored. Why not the tethered computer though? DNS-related, MAC address stuff?

[justpoet]

26 minutes ago, Captainmarino said:

Yeah, I figured as such. I was going to focus on my getting my wife's computer to be monitored. Why not the tethered computer though? DNS-related, MAC address stuff?

Without looking at it, I would guess multiple layers of NAT would be a problem.

[Kilrah]

4 hours ago, Captainmarino said:

Why not the tethered computer though? DNS-related, MAC address stuff?

The phone doesn't act as a raw WiFi adapter but as a NAT router and AFAIK there's no way to forward ports on the phone like you'd do on a common router, so you can't reach the tethered device from outside. 

 

Use an actual WiFi adapter, USB or such.