Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[DeanS]

1 minute ago, done12many2 said:

Too much work. My Caselabs case has wheels.  Next cold ass day, I'll just roll it out onto the rear deck! 

Fair enough, we want the temps though, i wish you tomorrow cold as hell.

[done12many2]

13 minutes ago, ProKoN said:

mine is not delided. i usually use a razor but these pcb soo fragile

 

i kinda wish i had that fancy delid tool and jumpy never visits me

 

if the stock tim freezes when we go sub zeros im gonna have to take the lid off

 

I was able to get it dialed in at 5.1 GHz at 1.31v before the delid.  It passed RealBench for 4 hours at that speed/voltage and some other stresses so I think it's a solid chip. 

 

It took a lot less voltage to pass Cinebench R15 at 5.1 

 

[done12many2]

6 minutes ago, DeanS said:

Fair enough, we want the temps though, i wish you tomorrow cold as hell.

Thanks bud. 

[Lays]

10 minutes ago, done12many2 said:

 

I was able to get it dialed in at 5.1 GHz at 1.31v before the delid.  It passed RealBench for 4 hours at that speed/voltage and some other stresses so I think it's a solid chip. 

 

wats that shet in bottom right corner doe

[mer.at]

8 hours ago, DeanS said:

on what MB are the 5670s? they look like stock clocks, and thats not bad considering i can get them really really cheap.

Supermicro X8DT3, found on Ebay

[Dabombinable]

59 minutes ago, done12many2 said:

 

I was able to get it dialed in at 5.1 GHz at 1.31v before the delid.  It passed RealBench for 4 hours at that speed/voltage and some other stresses so I think it's a solid chip. 

 

It took a lot less voltage to pass Cinebench R15 at 5.1 

 

Well....my 4790K is getting utterly rekt in the voltage department.

[DildorTheDecent]

4 hours ago, Lays said:

wats that shet in bottom right corner doe

ASUS Fan Xpert

[iHardware Shelden]

Got bored at work  

 

 

[Jumper118]

17 minutes ago, iHardware Shelden said:

Got bored at work  

wow.  you really need to get some dice at work. just put beer in the dice to keep boss/manager/supervisor happy  

 

boss "what are you doing with that smoking cooler box shelden" 

 

Shelden "here have a beer"

 

boss "thanks"

 

boss walks off while you bench = success 

 

 

[iHardware Shelden]

1 minute ago, Jumper118 said:

wow.  you really need to get some dice at work. just put beer in the dice to keep boss/manager/supervisor happy  

Not a bad idea

[DeanS]

2 minutes ago, iHardware Shelden said:

Not a bad idea

A fountain of cold beverage cooled by dice, funded by the company approve by the superiors, and run a pipe to your pc.

Whats the craziest coolant yet you guys have came up with?

[iHardware Shelden]

2 hours ago, DeanS said:

A fountain of cold beverage cooled by dice, funded by the company approve by the superiors, and run a pipe to your pc.

Whats the craziest coolant yet you guys have came up with?

Well at work a guy came in asking if he could use semen as thermal paste... I think he was high if that counts. As for coolant I can't think of anything lol

[Conti93]

On 12/1/2017 at 11:25 AM, Simon771 said:

1,5V and only 78°C lol. That's awesome temperature, concidering what voltage and cooler you have.

Did you delid your CPU maybe?

Yep, but didn't stop there; lapped both sides of IHS..

..And used CLU all around:

Bear in mind that 78°C was max temp under Cinebench R15; didn't try AIDA64 FPU only just to see my CPU burning at 90°C

On 12/1/2017 at 6:36 PM, done12many2 said:

 

He left out the part where his ambient temp is 5c.  

With this burning 4 meters from where the PC is..

..That's no less than 18°C at night hahah

[Qyoon]

Updated my core I5 4690K @4,5Ghz 1,16V for 6800K , 4,2Ghz 1,25V

 

 

Full screen here

https://gyazo.com/5ee4cfcf2a65818eafa8fb50bed00232

[done12many2]

On 1/14/2017 at 2:07 AM, ProKoN said:

sub ambient -9c on water

 

i like this iteration

 

 

On water at standard ambient room temps.  

 

As soon as I get some real memory (note the little league 3200 kit I'm using) I should be able to bump voltage just a hair more and push memory much harder.

 

5.4 GHz / 5.2 cache

 

 

 

[Marinatall_Ironside]

[done12many2]

8 minutes ago, JurunceNK said:

 

 

You should tweak your memory some.  I know that 5930k has some left in it.

[Marinatall_Ironside]

Just now, done12many2 said:

 

You should tweak your memory some.  I know that 5930k has some left in it.

Can't. Tried to push it to the magical 3600 MHz, but even one increment more (Next one up from 3200 MHz on my Rampage V Edition 10 is 3400 MHz), the system will not boot at all, and not even to the splash screen where I can get into the UEFI.

[done12many2]

3 minutes ago, JurunceNK said:

Can't. Tried to push it to the magical 3600 MHz, but even one increment more (Next one up from 3200 MHz on my Rampage V Edition 10 is 3400 MHz), the system will not boot at all, and not even to the splash screen where I can get into the UEFI.

 

No, 3200 is the sweet spot frequency wise on Haswell-E.  What I meant by tweaking were your timings.  Drop your primary timings and work on tRFC.  CR1 is optimal if you can pull it off.

 

These are what I used for my 5960x.

 

[Marinatall_Ironside]

1 minute ago, done12many2 said:

 

No, 3200 is the sweet spot frequency wise on Haswell-E.  What I meant by tweaking were your timings.  Drop your primary timings and work on tRFC.  CR1 is optimal if you can pull it off.

Ah. I'll try and see if I can even get it to boot, and if I do, that's where I have Memtest86.

[done12many2]

Just now, JurunceNK said:

Ah. I'll try and see if I can even get it to boot, and if I do, that's where I have Memtest86.

 

I edited my previous post to give you an example.  The timings will be specific to your set and IMC, but you should definitely try.

[arnavvr]

What is the max daily I can run on a Nice Loop on 32nm Intel? Some say 1.6v but keep it under 80C. Others say 1.4v no matter what.

[Clyne]

Questioning why I bought a Z270 instead of a Z170 instead..rip BCLK oc, max I'd gotten on my 6500 was 102. 

 

[Dabombinable]

 

@Jumper118

would it be allowed to have the 1.7V P3 1GHz listed sperately from my 1.75V P3 1GHz? Because unlike the 2x 1.75V P3 & 1.65V P3 667, it only has 8 caps under it as opposed to 12 (plus has a different colour PCB & is a year older):

 

Edit:

Also, what would be some good heatspreaders for SDRAM? Because even at stock the sticks I have get a bit toasty, let alone above 150MHz .

[DeanS]

On 1/15/2017 at 6:14 PM, Atsura said:

Updated my core I5 4690K @4,5Ghz 1,16V for 6800K , 4,2Ghz 1,25V

 

 

Full screen here

https://gyazo.com/5ee4cfcf2a65818eafa8fb50bed00232

Is that the max clock your chip can go? or is it just personal preference? Im actually targeting BWE chip as an upgrade but this score seems a little too low for the price difference.

 

14 hours ago, arnavvr said:

What is the max daily I can run on a Nice Loop on 32nm Intel? Some say 1.6v but keep it under 80C. Others say 1.4v no matter what.

As previously mentioned, i dont think anyone would be able to tell you exactly when or rather by how much 1.6v daily will decrease the lifespan of your chip, i guess its all down to temps and personal limitations.

If you decide to go for 1.6v daily, please keep me posted. Thanks.