Jump to content

4790k idle temps @ 69c

Doge_Such_Wow
By Doge_Such_Wow
in Troubleshooting
 Share
Posted

hello fellow doges

 

my cpu temps are at 69-74C at idle

 

my specs are

 

4790k

 

H100i Gtx

 

z97 mark S

 

16gb ripjaws z

 

sapphire r9 290x 8gb vapor-x

 

thinking of changing le thermal paste, what do you think?

 

 

"release your inner doge"


 


-doge 2069


Link to comment
Share on other sites
Link to post
Share on other sites
Posted

hello fellow doges

 

my cpu temps are at 69-74C at idle

 

my specs are

 

4790k

 

H100i Gtx

 

z97 mark S

 

16gb ripjaws z

 

sapphire r9 290x 8gb vapor-x

 

thinking of changing le thermal paste, what do you think?

what the hell lol, resit cooler and apply new thermal paste. you might have put too much on.

"Sulit" (adj.) something that is worth it

i7 8700K 4.8Ghz delidded / Corsair H100i V2 / Asus Strix Z370-F / G.Skill Trident Z RGB 16GB 3200 / EVGA GTX 1080Ti FTW3 / ASUS ROG SWIFT PG279Q

Samsung 850 EVO 500GB & 250GB - Crucial MX300 M.2 525GB / Fractal Design Define S / Corsair K70 MX Reds / Logitech G502 / Beyerdynamic DT770 250Ohm

SMSL SD793II AMP/DAC - Schiit Magni 3 / PCPP

Old Rig

i5 2500k 4.5Ghz | Gigabyte Z68XP-UD3P | Zotac GTX 980 AMP! Extreme | Crucial Ballistix Tactical 16GB 1866MHz

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

what the hell lol, resit cooler and apply new thermal paste. you might have put too much on.

i used the cooler with the paste already applied

"release your inner doge"


 


-doge 2069


Link to comment
Share on other sites
Link to post
Share on other sites
Posted

what the hell lol, resit cooler and apply new thermal paste. you might have put too much on.

I'm pretty sure the H100i comes with it pre-applied.

"It pays to keep an open mind, but not so open your brain falls out." - Carl Sagan.

"I can explain it to you, but I can't understand it for you" - Edward I. Koch

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

change le thermal paste doge

staty xxxxxmlghaxr

 

 

Yah, probably replace it with arctic silver 5. Small dot or X shape.

is arctic silver 5 good

"release your inner doge"


 


-doge 2069


Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i would certainly do that, i wouldnt even try load tbh, see if it is tight in place, and make sure pump is working properly, from my experience you can feel the water moving through the tubes.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Bdq6LWw_700wa_0.gif

thnx bby ily <3

 

 

Reseat ur damn cooler

will do

 

Check if the fans are spinning.

using noctua ones so yesh the are

 

 

i would certainly do that, i wouldnt even try load tbh, see if it is tight in place, and make sure pump is working properly, from my experience you can feel the water moving through the tubes.

i havent done load because i dont wanna kill my cpu

"release your inner doge"


 


-doge 2069


Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I think you have your backplate wrong, common mistake (made it myself too)

There are 2 spacings in it at one side, the 2 top screws of the socket should be there. Check that first.

If you want my attention, quote meh! D: or just stick an @samcool55 in your post :3

Spying on everyone to fight against terrorism is like shooting a mosquito with a cannon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Pre-applied thermal paste sucks. You might be able to spread it out better by twisting the waterblock back and forth a couple times to squish it out.

i think im better off with aftermarket paste

"release your inner doge"


 


-doge 2069


Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Yah, probably replace it with arctic silver 5. Small dot or X shape.

 

 

is arctic silver 5 good

 

 

-snip-

 

 

Arctic silver is one of the best.

To be honest, I wouldn't recommend Arctic Silver. It used to be the very best, but now there's very little difference between it and cheaper solutions. There's also TIM like MX-4 which performs just as well, but doesn't have the same risks of conductivity. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I think you have your backplate wrong, common mistake (made it myself too)

There are 2 spacings in it at one side, the 2 top screws of the socket should be there. Check that first.

nah, i had normal temps like a week ago. and now everythings going derp

"release your inner doge"


 


-doge 2069


Link to comment
Share on other sites
Link to post
Share on other sites
Posted

yes and artic silver 5 = 200 hour cure time, so you wont get best performance level until 200 hours passed

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

nah, i had normal temps like a week ago. and now everythings going derp

Much heat, much trouble :D

Try to remount the cpu block, also feel if the tubes are mildly warm.

Maybe try to read the pump speed? There is a 3-pin plug with 1 tiny wire, that one gives you the pump speed.

If you want my attention, quote meh! D: or just stick an @samcool55 in your post :3

Spying on everyone to fight against terrorism is like shooting a mosquito with a cannon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Feel if the pump is spinning, you should be able to feel it I would imagine.

System specs
  • Graphics card: Asus GTX 980 Ti (Temp target: 60c, fan speed: slow as hell)
  • CPU: Intel 6700k @ 4.2Ghz
  • CPU Heatsink: ThermalRight Silver Arrow Extreme
  • Motherboard: Asus Maximus Viii Gene
  • Ram: 8GB of DDR4 @ 3000Mhz
  • Headphone source: O2 + Odac 
  • Mic input: Creative X-Fi Titanium HD
  • Case: Fractal Design Arc midi R2
  • Boot Drive: Samsung 840 Pro 128GB 
  • Storage: Seagate SSHD 2TB
  • PSU: Be quiet! Dark Power Pro 550w

Peripherals

  • Monitor: Asus ROG Swift PG278Q
  • Mouse: Razer DeathAdder Chroma (16.5 inch/360)
  • Mouse surface: Mionix Sargas 900
  • Tablet: Wacom Intuos Pen
  • Keyboard: Filco Majestouch Ninja, MX Brown, Ten Keyless 
  • Headphones: AKG K7xx
  • IEMs: BrainWavs S1
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

yes and artic silver 5 = 200 hour cure time, so you wont get best performance level until 200 hours passed

Nono, it's 69 :D But aside from trolling, it might take a while. But you should be able to use it right away.

If you want my attention, quote meh! D: or just stick an @samcool55 in your post :3

Spying on everyone to fight against terrorism is like shooting a mosquito with a cannon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Obama.

Dinkelburg...

 

@ OP: Must be backplate.

"We're all in this together, might as well be friends" Tom, Toonami.

 

mini eLiXiVy: my open source 65% mechanical PCB, a build log, PCB anatomy and discussing open source licenses: https://linustechtips.com/topic/1366493-elixivy-a-65-mechanical-keyboard-build-log-pcb-anatomy-and-how-i-open-sourced-this-project/

 

mini_cardboard: a 4% keyboard build log and how keyboards work: https://linustechtips.com/topic/1328547-mini_cardboard-a-4-keyboard-build-log-and-how-keyboards-work/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

hello fellow doges

 

my cpu temps are at 69-74C at idle

 

my specs are

 

4790k

 

H100i Gtx

 

z97 mark S

 

16gb ripjaws z

 

sapphire r9 290x 8gb vapor-x

 

thinking of changing le thermal paste, what do you think?

 

How warm is it inside? wat are the Inside temperatures?

EOC folding stats - Folding stats - My web folding page stats

 

Summer Glau: Quote's The future is worth fighting for. Serenity

 

My linux setup: CPU: I7 2600K @4.5Ghz, MM: Corsair 16GB vengeance @1600Mhz, GPU: 2 Way Radeon his iceq x2 7970, MB: Asus sabertooth Z77, PSU: Corsair 750 plus Gold modular

 

My gaming setup: CPU: I7 3770K @4.7Ghz, MM: Corsair 32GB vengeance @1600Mhz, GPU: 2 Way Gigabyte RX580 8GB, MB: Asus sabertooth Z77, PSU: Corsair 860i Platinum modular

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×