Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Klenex]

7 minutes ago, Jumper118 said:

that is normal. why didnt you post your 4ghz score? 

Because my 4GHz score was with 2133MHz ram.

 

I'm still having a few issues with memory.

For example, if I reset the CMOS for whatever reason and try to dial in 3200MHz, 9 times out of 10 I just get an F9 code boot loop (Gigabyte Gaming 5). I have to take one stick out, dial in my memory settings and then put the second stick back in and it works like a charm

 

I'll try to do a 4GHz run

 

 

-------------------------

 

Here you go

 

 

Btw @Jumper118, I saw a guy on the spreadsheet who managed to get past the 1800 points barrier with the same speed as me but with way worse timings on the RAM.

Any idea on how I can improve my score?

 

 

[done12many2]

17 minutes ago, Klenex said:

 

Any idea on how I can improve my score?

 

 

 

Easiest way would be to buy a 5960x.    

 

17 minutes ago, Klenex said:

Btw @Jumper118, I saw a guy on the spreadsheet who managed to get past the 1800 points barrier with the same speed as me but with way worse timings on the RAM.

 

Jokes aside, primary timings aren't everything.  While I am not familiar with how AMD Ryzen memory overclocking or tweaking works, I can tell you that there is much more gained in secondary and tertiary timings then with primaries timings on Intel platforms.  

 

Long way of saying that the other guy just tweaked the timings that you can't see in a CPUz screenshot.  

[Jumper118]

22 minutes ago, Klenex said:

Because my 4GHz score was with 2133MHz ram.

 

I'm still having a few issues with memory.

For example, if I reset the CMOS for whatever reason and try to dial in 3200MHz, 9 times out of 10 I just get an F9 code boot loop (Gigabyte Gaming 5). I have to take one stick out, dial in my memory settings and then put the second stick back in and it works like a charm

 

I'll try to do a 4GHz run

 

 

-------------------------

 

Here you go

 

 

 

Btw @Jumper118, I saw a guy on the spreadsheet who managed to get past the 1800 points barrier with the same speed as me but with way worse timings on the RAM.

Any idea on how I can improve my score?

 

 

what board do you have? how many times did you run cinebench? did you run with everything closed and the priority set to real time?

[Klenex]

Just now, Jumper118 said:

what board do you have? how many times did you run cinebench? did you run with everything closed and the priority set to real time?

I have the Gaming 5 from Gigabyte.

 

I ran it until the score didn't improve.

 

I ran with everything closed (did not close processes), but didn't set the priority to real-time....completely forgot about that

 

I did manage a bit of an improvement, and was able to run 3200MHz CL14 but that didn't seem to make much of difference...

 

[Jumper118]

1 minute ago, Klenex said:

I have the Gaming 5 from Gigabyte.

 

I ran it until the score didn't improve.

 

I ran with everything closed (did not close processes), but didn't set the priority to real-time....completely forgot about that

 

I did manage a bit of an improvement, and was able to run 3200MHz CL14 but that didn't seem to make much of difference...

 

 

are you running b die? that is a bit better. 

 

if you are running b die try running 14-13-13-13-28 on the memory timings. that should score better.

[Klenex]

Just now, Jumper118 said:

are you running b die? that is a bit better. 

 

if you are running b die try running 14-13-13-13-28 on the memory timings. that should score better.

I haven't researched this memory chip thing at all, but I don't think this is b-die.

I have this kit: http://www.corsair.com/en-gb/vengeance-led-16gb-2-x-8gb-ddr4-dram-3200mhz-c16-memory-kit-white-led-cmu16gx4m2c3200c16

[Jumper118]

1 minute ago, Klenex said:

I haven't researched this memory chip thing at all, but I don't think this is b-die.

I have this kit: http://www.corsair.com/en-gb/vengeance-led-16gb-2-x-8gb-ddr4-dram-3200mhz-c16-memory-kit-white-led-cmu16gx4m2c3200c16

its going to be hynix or b die. if 14-13-13-13-28 posts and boots with a little more voltage on the memory then its b die if it doesnt post its probably hynix. 

[Klenex]

Just now, Jumper118 said:

its going to be hynix or b die. if 14-13-13-13-28 posts and boots with a little more voltage on the memory then its b die if it doesnt post its probably hynix. 

Well, I guess I don't have b-die....

 

The best they can do with 1.45v is 14-14-14-15-28.

If I change that last 15 to a 14 I get the 11 post code which with my board means "Pre memory CPU initialization has started".

[Jumper118]

37 minutes ago, Klenex said:

Well, I guess I don't have b-die....

 

The best they can do with 1.45v is 14-14-14-15-28.

If I change that last 15 to a 14 I get the 11 post code which with my board means "Pre memory CPU initialization has started".

well thats not too bad. its probably just a low bin and needs more voltage. 

[shakenbreak]

Dialed in a new overclock on my 2500k this morning, pretty happy with it so far 

[iHardware Shelden]

All these fancy new chips O_O

[shakenbreak]

Booted up the old war machine and got this

[Đỗ Đức Huy]

My 5Ghz 2600K, not too shabby eh?

https://valid.x86.fr/k1u34u

CPUz validation link

[PCGuy_5960]

1 minute ago, Đỗ Đức Huy said:

My 5Ghz 2600K, not too shabby eh?

Run Cinebench single core as well 

[Đỗ Đức Huy]

21 minutes ago, PCGuy_5960 said:

Run Cinebench single core as well 

How to? New to this thing

[Jumper118]

Just now, Đỗ Đức Huy said:

How to? New to this thing

file >advanced benchmark then it will appear 

[Đỗ Đức Huy]

1.56v V core, dunno if this is safe for 24/7 or not

[done12many2]

1 minute ago, Đỗ Đức Huy said:

1.56v V core, dunno if this is safe for 24/7 or not

 

[PCGuy_5960]

3 minutes ago, Đỗ Đức Huy said:

1.56v V core, dunno if this is safe for 24/7 or not

[Đỗ Đức Huy]

I just put the "50" in the multiplier box an left the voltage on auto. Heck that's all I've done to get 5Ghz. Anyone knows how to set up voltage curve for a p67 sabertooth board?

[Guest]

27 minutes ago, Đỗ Đức Huy said:

I just put the "50" in the multiplier box an left the voltage on auto. Heck that's all I've done to get 5Ghz. Anyone knows how to set up voltage curve for a p67 sabertooth board?

mình không biết

[Jumper118]

45 minutes ago, Đỗ Đức Huy said:

I just put the "50" in the multiplier box an left the voltage on auto. Heck that's all I've done to get 5Ghz. Anyone knows how to set up voltage curve for a p67 sabertooth board?

lol auto volts is probably putting about 1.6v through it under load  

[shakenbreak]

Hit 5Ghz earlier, might mess around and see if I can push it higher

[Jumper118]

i am liking these 5ghz scores. its like 5ghz sandy bridge master race all over again.  

10 minutes ago, shakenbreak said:

Hit 5Ghz earlier, might mess around and see if I can push it higher

please set the baseclock to 100.1

[PCGuy_5960]

Just now, Jumper118 said:

i am liking these 5ghz scores. its like 5ghz sandy bridge master race all over again.  

I thought you hated Intel