I Pulled a Linus & dropped a cpu

[brokebeardedguy]

So if someone dropped a cpu and chipped the corner how had is it? I know in videos they assign pci slots to different vms can i do the same on the cpu? or a way to assign pci slots to a controler?

Its a LGA 1151 i5 6400

[RollinLower]

welp, this really depends on what pins got chipped off.

 

if it got dropped hard enough you might have also cracked the die itself tough, and if that happened it's game over for sure.

[brokebeardedguy]

im having pci controller issues wanted to move it to an ITX board, but dont know if i can even use it now

[Skiiwee29]

She's dead. 

[Boomwebsearch]

1 minute ago, brokebeardedguy said:

So if someone dropped a cpu and chipped the corner how had is it? I know in videos they assign pci slots to different vms can i do the same on the cpu? or a way to assign pci slots to a controler?

 

What CPU is this (model and manufacturer), the usability of the processor depends on what pins you damaged and how important they are to operation?

[brokebeardedguy]

3 minutes ago, Boomwebsearch said:

 

What CPU is this (model and manufacturer), the usability of the processor depends on what pins you damaged and how important they are to operation?

i5 6400  sr2l6       manufacturer?

it was suposed to go on a msi h110i pro ac

[aisle9]

 

[sub68]

13 minutes ago, brokebeardedguy said:

So if someone dropped a cpu and chipped the corner how had is it? I know in videos they assign pci slots to different vms can i do the same on the cpu? or a way to assign pci slots to a controler?

Its a LGA 1151 i5 6400

there is no way this is going back alive

[sub68]

8 minutes ago, aisle9 said:

 

good job you did what you needed to do

[Guest]

rip (the CPU is most probably quite dead now)

[CPT_BEEMO]

F

[MartinKweh]

27 minutes ago, brokebeardedguy said:

So if someone dropped a cpu and chipped the corner how had is it? I know in videos they assign pci slots to different vms can i do the same on the cpu? or a way to assign pci slots to a controler?

Its a LGA 1151 i5 6400

that is the deadest CPU I have ever seen after the shorted liquid metal, failed delid and full tornado alley bent pin cpu.

[Velcade]

You should change your name to BrokeCPUGuy.

 

i5s should be cheap on the secondary market or use this opportunity to go AMD.  

[svmlegacy]

41 minutes ago, brokebeardedguy said:

So if someone dropped a cpu and chipped the corner how had is it?

I wouldn't even install this in a socket out of fear of damaging the socket. Cut your losses.

[Boomwebsearch]

41 minutes ago, brokebeardedguy said:

im having pci controller issues wanted to move it to an ITX board, but dont know if i can even use it now

33 minutes ago, brokebeardedguy said:

i5 6400  sr2l6       manufacturer?

it was suposed to go on a msi h110i pro ac

 

Unfortunately, it is likely going to cost more effort/time/expense in trying to repair this CPU than replacement, may be a good opportunity to upgrade to a faster/newer CPU. Just be more careful to prevent damaging the new one.

[brokebeardedguy]

7 hours ago, Boomwebsearch said:

 

Unfortunately, it is likely going to cost more effort/time/expense in trying to repair this CPU than replacement, may be a good opportunity to upgrade to a faster/newer CPU. Just be more careful to prevent damaging the new one.

It will just get tossed. I was just looking to upgrade for my kid. Used they still go for $100 he's on a g4400 now. He doesn't play supper intense games.  I guess it will just be a wash I bought it used from a guy at work at parted it out. Making the cpu upgrade "free"

 

I'd like to put together amd build just can't justify the cost being that it wouldn't get used.

[Falkentyne]

That entire corner ripped off is for PEG/PCI Express.

The other three corners are DDR4 (2) and Vcore (1).

[bmx6454]

that thing is done lol. seem like something i might do. luckily a 6400 doesn't go for much if your are set on that chip https://www.ebay.com/itm/Intel-CPU-i5-6400-Quad-Cores-2-70Ghz-6MB-LGA1151-SR2L7-GUARANTEED/293585666873?epid=1560165238&hash=item445b11c339:g:fwgAAOSwUQBeUCnf:sc:USPSFirstClass!08865!US!-1

[brokebeardedguy]

15 hours ago, bmx6454 said:

that thing is done lol. seem like something i might do. luckily a 6400 doesn't go for much if your are set on that chip https://www.ebay.com/itm/Intel-CPU-i5-6400-Quad-Cores-2-70Ghz-6MB-LGA1151-SR2L7-GUARANTEED/293585666873?epid=1560165238&hash=item445b11c339:g:fwgAAOSwUQBeUCnf:sc:USPSFirstClass!08865!US!-1

do you think in todays market 75 is worth it for that tech? i heard ddr4 is not specific to amd vs intel like the old days maybe a different platform?

 

i love me some older hardware, im considering selling both my x8dtlif and getting a node chassis. ill be able to fit an extra 2 servers in half the area but that's just so i can finally rackmount my battery and get if off the top of my cart