Jump to content

Mechanical Keyboard Club!

Dave :)
By Dave :)
in Peripherals
 Share
Posted
6 minutes ago, RelativeMono said:

thats what i was commenting on right?

but i was asking the first question

anyone play it with touhou?

no, mine has a custom top plate to fit the switches. The odin drop in works with any off the shelf fightstick for the most part Post image

 

I've used stick/mixbox to play many different kinds of games like platformers or bullet hell games, but never touhou specifically. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
11 hours ago, alittlepeace said:

no, mine has a custom top plate to fit the switches. The odin drop in works with any off the shelf fightstick for the most part Post image

 

I've used stick/mixbox to play many different kinds of games like platformers or bullet hell games, but never touhou specifically. 

oh, nah if i would do it i would metal work it myself

If I had one wish, I would ask for a big enough ass for the whole world to kiss

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

image.thumb.png.9f1380ca1d7d6e5410f8687b22aed2cc.png

 

The FC660C and Heavy-6 are here. Can't wait to get this all setup.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 hours ago, Den-Fi said:

The FC660C and Heavy-6 are here. Can't wait to get this all setup.

Is that more topre I see? 

Resident Mozilla Shill.   Typed on my Ortholinear JJ40 custom keyboard
               __     I am the ASCIIDino.
              / _)
     _.----._/ /      If you can see me you 
    /         /       must put me in your 
 __/ (  | (  |        signature for 24 hours.
/__.-'|_|--|_|
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

0G1A8835-Edit.thumb.jpg.50156c48a742ad569b1b780ad4f5669b.jpg0G1A8832-Edit.thumb.jpg.bf76525537f1dc8ca6e7adac690ecfaa.jpg

 

 

Whew. This case is gorgeous.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I dropped the JJanck off of my desk and broke my badly 3d printed plate, so I need to either print another one or order a proper metal one.  The superglue joint in the case also broke, but that's easy enough to fix. 

Resident Mozilla Shill.   Typed on my Ortholinear JJ40 custom keyboard
               __     I am the ASCIIDino.
              / _)
     _.----._/ /      If you can see me you 
    /         /       must put me in your 
 __/ (  | (  |        signature for 24 hours.
/__.-'|_|--|_|
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Got an upgrade for my Japanese keyboard.

 

She now features a new rosewood case, brass plate, Zeal stabs, Tealios, and of course the Akko World Tour Tokyo keycap set.

 

IMG_2444.thumb.JPG.399cab060575eefbb8be82c9c13fab0d.JPG

mechanical keyboard switches aficionado & hi-fi audio enthusiast

switch reviews • how i lube mx-style keyboard switches

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

O-rings do have a use!

 

Not dampening the bottom out impact. That's squishy and gross. No, they work as both general sound dampening and adding weight to a cap that feels too light. As long as the key cap is tall enough that the o-ring doesn't contact the switch housing you don't need to worry about a squishy bottom out. I've tried on SA XDA and MT3 caps. See image.  It mostly dulls the high end and leaves a more bassy sounding thock. The effect is subtle but I can notice it. It most apparent on these XDA caps as they are the lightest and most high pitched. On SA , the heaviest of the 3, I'm not sure if I can notice it or not.

 

 

 

IMG_20191023_120526.thumb.jpg.b982ddae0a526073e4423b228230d2f7.jpg

Mechanical Keyboard Switch Lubing Guide

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted (edited)
1 minute ago, alittlepeace said:

SNIP

New split time? Also, 3dp or acrylic?  I'm going to assume acrylic.

Edited by FezBoy
snipsnip 
Resident Mozilla Shill.   Typed on my Ortholinear JJ40 custom keyboard
               __     I am the ASCIIDino.
              / _)
     _.----._/ /      If you can see me you 
    /         /       must put me in your 
 __/ (  | (  |        signature for 24 hours.
/__.-'|_|--|_|
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Laser cut acrylic for my corne

 

This was always the plan, but the laser cutter went down and I had to use regular polycarb plates

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

0G1A8885-Edit.thumb.jpg.9c420da17bbf04d8ace0b26cc3a888bc.jpg

 

Dark Side of the Moon & Cherry Killer

FC660C + Nobauer Heavy 6 Aperture / DZ60+KBD5Degree+MaxkeySA

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@Den-Fi This post of yours requires drool reaction, liking it is not enough. That Norbeauersource.gif

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

One of the kbd cases?

1 minute ago, noxdeouroboros said:

Far from glamour shots that are on here, but it's mostly unused, cost very little, and I kinda want to show it off, it has Hako True switches, so far I'm a fan.

 

DSC-0378.jpg

te kbd cases?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, alittlepeace said:

oh I knew that, I meant the carrying case

Not sure about that, it has a fox logo on it, it came with the board when it was originally bought.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i never carry my TKL, so not sure if there are nice cases for them, your current ones are nice, I like that with red trim, nice.

Does anyone know if Anne Pro V1 is horrible? I can get it for 20 euros, kinda tempted.

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
34 minutes ago, noxdeouroboros said:

Does anyone know if Anne Pro V1 is horrible? I can get it for 20 euros, kinda tempted.

There were a lot of connectivity issues with the V1 that were addressed in the V2, but at 20 euros, it can be a good project board to play with, or even just a travel board.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

OK. Sorry about this but I have a question about a particular keyboard. Many pages back, there is a discussion about the Z-88 81 key keyboard. I like the small form factor of this keyboard. I have 3 of these keyboards and one I just received is a little bit not working. Apparently over on REDDIT there is a thread about how another firmware will work with this keyboard. He flashed his keyboard with the wrong firmware and now it is not working. So he gives it to me and bought himself a new keyboard. So now I have this Z-88 that does not work. So the big question is, does anyone know where I can get a stock version of the firmware for this keyboard? Or how do I take firmware from one keyboard and flash it to the one that is kinda screwed up? It is a nice keyboard but it is just misflashed. Help... and thanks.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Peripherals

×