Sentryy

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Why not 1337 pins lol

Hello, I asked earlier if you guys would be interested in a tutorial for how to make a CPU necklace
Step 1 : Make sure you have all of the required supplies. You will need a CPU processor (Dead Preferably This WILL kill your CPU), A Chain of sorts (I used a 2.4mm Ball chain) A drill press, And optionally a C-Clamp (Recommended) and a Block of wood to drill into.
Step 2 : You will need to align the CPU with your drill bit, I recommend the top right corner. If your drill press has a Laser light like mine does you can use that otherwise, try to lower the bit so it is almost touching the CPU. You also would want to put a piece of scrap wood under the CPU.
Step 3 : You will want to clamp down the CPU with a C-Clamp or Bar clamp, Try to put the top of the clamp on the opposite side of where you are drilling. Next you will want to Check again that the drill is in the correct position, as i have noticed that when I put the C-Clamp on the CPU it would move sometimes.
Step 4 : Now that the CPU is in the correct position, Turn on the drill press and slowly lower it into the CPU. If you used a Piece of scrap wood once you will know you are through the CPU when there are wood bits coming out of the hole.
Step 5 : Now that you are through the CPU, you will need to leave the press on while you Slowly let the bit out of the CPU by turning the knob/wheel on the side back to it's original position.
Step 6 : Release the C-Clamp or Bar Clamp, then remove the CPU.
Step 7 : Now that there is a hole in the CPU, You can run a  chain through the hole and you have a stylish CPU necklace!
Media : Video Tutorial! Also 2 pictures of the finished product
Also I am selling on the classifieds, so you can find that if you want one but don't have or want to buy a drill press. 
 

Yeah i got 20 CPUS in the mail, I am going to make a kneclace with it though

You should make a crown. Then run around proclaiming yourself king of the internet.

Because you are doing something right when you have more video ram than normal ram.

Because you are doing something right when you have more video ram than normal ram.

I would Pry the fans off and use spray paint to make them gold
then i would use super glue to glue them together  and duck tape the fans on

also you should use hot glue instead of thermal compound it is called hot glue because it is good for high tempratures

also you should use hot glue instead of thermal compound it is called hot glue because it is good for high tempratures

I would strongly recommend you change your power supply to this one: https://pcpartpicker.com/part/coolmax-power-supply-cuq1350b
 
Who doesn't want something efficient as 80+ and 1300W... This thing will save so much on your power bill every one should go out and buy one now! Especially with those sexy 295x2's and that power efficient 9590. 

locked cpu on an overclocking board?
i dont think you'll need a beefy cooler for your locked cpu, but im in no position to say this
drop the 500gb ssd and get a 250gb with 2tb hard disk maybe?
i see the network card... could try getting a motherboard with built in wifi
also, not the best psu ever, get the EVGA Supernova G2 650W

i get 1gb of "high speed" data and unlimited "Not high speed data"

Because you are doing something right when you have more video ram than normal ram.

It will work with your 550 watt, but I doubt even if it is hotter than the 960 that you will start having performance hits, or high ass temps, like 90c+

Efficiency =/= Quality. That being said, the fact that it doesn´t have 80 plus makes me want to not recommend using it even more.

USA! USA! USA! USA!

They make Youtube Videos on channels such as : LinusTechTips, TechQuickie, and Channel Super Fun. They also make commercials for companies, mostly computer hardware and peripherals.