Car Enthusiast Club [Now Motorcycle friendly!] - First thread to 150k! ¯\_(ツ)_/¯

[iHardware Shelden]

1 hour ago, chaozbandit said:

GET YOUR WALLETS READY

 

A Skyline GTR R33 400R just went up for auction in Japan. List date is 2016/12/09. Mileage on the car is less than 14,000 km and the list price is ¥6,800,000 (about $80,000 CAD)

 

This would look nice next to my Honda

[terrytek]

8 hours ago, FuzzyYellow said:

that reminds me, I have to have a physical before the Tennis Season... ugh...

reminds me, i need one for track, i'm not gonna like it when my physician touches my junk and inspects it. ugh.

8 hours ago, Bajantechnician said:

Its not in one of the options when I use the configurator. Beteen the cars I listed, which v6 should i get? (including the brz even though its v4)

imo the genesis v6 sounds the best over the camaro.

[techswede]

8 hours ago, Bajantechnician said:

Its not in one of the options when I use the configurator. Beteen the cars I listed, which v6 should i get? (including the brz even though its v4)

If you can i'd suggest just driving them all before making your choice.

Personally i'm leaning towards the chevy. Or even a challenger which is not on your list. 

But the brz seems like the more cost effective car out of the bunch. 

[terrytek]

@carguy86 look at this shit on speedhunters http://www.speedhunters.com/2016/12/building-dreams-stone-motorsport/

 apparently the goal is to make a 1:1 car, with 650hp out of that 2jz with a 650kg car. i think that's suicide, because that's such a light ass car, with that much power.

[MEC-777]

3 minutes ago, terrytek said:

@carguy86 look at this shit on speedhunters http://www.speedhunters.com/2016/12/building-dreams-stone-motorsport/ apparently the goal is to make a 1:1 car, with 650hp out of that 2jz with a 650kg car. i think that's suicide, because that's such a light ass car, with that much power.

Tis a thing of beauty.  

[terrytek]

Just now, MEC-777 said:

Tis a thing of beauty.  

i love stuff like this. completely insane stuff like this. makes my heart so happy.

[jasonvp]

This post might end up being a bit long.  Hopefully the short attention spans common in a lot of readers will still allow them to get through all of it. ;-)

 

Background: I've been driving Corvettes since '96.  Prior to the one I have now (which this post is about), I've owned 4 of them: a 1996, 1999 (heavily modified), 2007 Z06, and a 2010 ZR1.  All were driven extensively on the road course that's local to me (Summit Point Raceway), along with serving perfectly as daily drivers, errand runners, grocery-getters, etc.  I don't believe in owning a garage queen; I drive my cars.

 

Late in 2016 I sold my ZR1, as I was expecting to buy a 2016 Z06.  But I was hinted at by my contacts within the Corvette engineering team within GM: wait for the 2017s.  So I waited a year without having a Corvette.  And that was frustrating.  I missed a summer of track driving, dammit!

 

Anyway, August 2016 rolled around and GM cracked open the order intake for the 2017 cars.  I placed one with a large Corvette dealer as soon as I could.  And with the order, I included the "Engine Build Experience."

 

In the first week of October, I went to the Corvette plant in Bowling Green, KY and actually hand-built the engine that would be going into my car.  For those not aware: the supercharged engines dropped into the snout of the Z06 are all built by hand at the Corvette plant.  Customers can add an option to do that build themselves, with a (very patient!) engine builder helping them.  Since I'd never turned a wrench on an engine before, I really wanted to give this a try.

 

It was worth every fricken penny.

 

After going through various CYA videos (watch where you walk; you don't have the right of way, the machinery does; stay with your guide; do what your told, etc etc) at 0600, I was brought into the engine build room.  Every engine starts like so: a bare block.  Shown here with the crank as well.

 

There are few pieces that come pre-assembled from the part manufacturer: the heads already have the valves in them; the pistons are already attached to the connecting rods.  The mechanized steps are the tightening of most of the bolts; you actually get the machine in place and hold it down to tighten the bolts, but the computer drives the actual turning of them to apply exactly the proper torque.  Another mechanized part is the application of RTV to the pan.  Elsewise you're doing it all yourself.  Each part is put in place, positioned, tightened down, etc.  The block is on a big cart that you push around from station to station to do all of this, as well.

 

Here, I'm using a $25000 wireless computerized torque wrench, accurate to the hundredth of a Nm and attached to the overseeing computer.  I'm tightening down the high pressure fuel lines that sit in the valley of the V.

 

Along the way, I got to add my initials to a couple of the parts as they were attached to the engine.  Here's the bottom side of the engine oil cooler, and you can also see my initials on the oil filter (which has since been changed, so it's gone).

 

It was a long process.  The pros there can do an engine in about 2-3 hours.  But when they're teaching someone, that can be strung out to 6-7 hours.  And it's exhausting; more so than you might think.

 

When done, my name got attached to the engine:

 

Then it was off to the testing booth where it's actually filled with gas and started for the very first time.  It's hard to explain the feeling that hits you, right in the chest, when you hear that engine you spent 6-8 hours assembling: from a bunch of pieces to a ~460lb chunk of kick-ass; cough, sputter, inhale a few times, and then *CRACK* to life.

 

That was awesome.

 

A couple of days later (I was already home, by then), the assembly of my car started.  The following week, it was finished, plopped on an 18-wheeler, and delivered to my dealer.  Since I bought it from an out-of-state dealer, and VA has annual safety inspections, I had to get it inspected.  So here it is sitting out behind my usual service station, awaiting:

 

In our parking garage at work, in a spot that almost looks like it was reserved for me:

 

And I'm already modifying it.  Specifically for track use: a harness bar behind the seats:

 

Happy.  Boy.

[jasonvp]

And there's a bug in the forum: I don't know why that "block" picture got added to the end of my post under the "Happy. Boy."  Every time I delete it and save the post, it keeps coming back.  That wasn't intended.

 

[vetali]

Not gonna quote because deleting pictures out of quotes is unnecessarily hard, but thats awesome. C6 ZR1 to C7 Z06, how is it?

[techswede]

28 minutes ago, jasonvp said:

This post might end up being a bit long.  Hopefully the short attention spans common in a lot of readers will still allow them to get through all of it. ;-)

Background: I've been driving Corvettes since '96.  Prior to the one I have now (which this post is about), I've owned 4 of them: a 1996, 1999 (heavily modified), 2007 Z06, and a 2010 ZR1.  All were driven extensively on the road course that's local to me (Summit Point Raceway), along with serving perfectly as daily drivers, errand runners, grocery-getters, etc.  I don't believe in owning a garage queen; I drive my cars.

Late in 2016 I sold my ZR1, as I was expecting to buy a 2016 Z06.  But I was hinted at by my contacts within the Corvette engineering team within GM: wait for the 2017s.  So I waited a year without having a Corvette.  And that was frustrating.  I missed a summer of track driving, dammit!

Anyway, August 2016 rolled around and GM cracked open the order intake for the 2017 cars.  I placed one with a large Corvette dealer as soon as I could.  And with the order, I included the "Engine Build Experience."

In the first week of October, I went to the Corvette plant in Bowling Green, KY and actually hand-built the engine that would be going into my car.  For those not aware: the supercharged engines dropped into the snout of the Z06 are all built by hand at the Corvette plant.  Customers can add an option to do that build themselves, with a (very patient!) engine builder helping them.  Since I'd never turned a wrench on an engine before, I really wanted to give this a try.

It was worth every fricken penny.

After going through various CYA videos (watch where you walk; you don't have the right of way, the machinery does; stay with your guide; do what your told, etc etc) at 0600, I was brought into the engine build room.  Every engine starts like so: a bare block.  Shown here with the crank as well.

There are few pieces that come pre-assembled from the part manufacturer: the heads already have the valves in them; the pistons are already attached to the connecting rods.  The mechanized steps are the tightening of most of the bolts; you actually get the machine in place and hold it down to tighten the bolts, but the computer drives the actual turning of them to apply exactly the proper torque.  Another mechanized part is the application of RTV to the pan.  Elsewise you're doing it all yourself.  Each part is put in place, positioned, tightened down, etc.  The block is on a big cart that you push around from station to station to do all of this, as well.

Here, I'm using a $25000 wireless computerized torque wrench, accurate to the hundredth of a Nm and attached to the overseeing computer.  I'm tightening down the high pressure fuel lines that sit in the valley of the V.

Along the way, I got to add my initials to a couple of the parts as they were attached to the engine.  Here's the bottom side of the engine oil cooler, and you can also see my initials on the oil filter (which has since been changed, so it's gone).

It was a long process.  The pros there can do an engine in about 2-3 hours.  But when they're teaching someone, that can be strung out to 6-7 hours.  And it's exhausting; more so than you might think.

When done, my name got attached to the engine:

Then it was off to the testing booth where it's actually filled with gas and started for the very first time.  It's hard to explain the feeling that hits you, right in the chest, when you hear that engine you spent 6-8 hours assembling: from a bunch of pieces to a ~460lb chunk of kick-ass; cough, sputter, inhale a few times, and then *CRACK* to life.

That was awesome.

A couple of days later (I was already home, by then), the assembly of my car started.  The following week, it was finished, plopped on an 18-wheeler, and delivered to my dealer.  Since I bought it from an out-of-state dealer, and VA has annual safety inspections, I had to get it inspected.  So here it is sitting out behind my usual service station, awaiting:

In our parking garage at work, in a spot that almost looks like it was reserved for me:

And I'm already modifying it.  Specifically for track use: a harness bar behind the seats:

Happy.  Boy.

Living the dream right there  Congratulations on an awesome car man. 

Must be really pleasant to put together a brand new engine too. 

 

On a sidenote.. I would looove to have that job. Would be really fun to help someone build their own engine. 

[bcredeur97]

Weird almost high pitched whine noise from my car when I started it this morning in 39F weather... Only for a little while though and then it went away

[techswede]

My new door locks have arrived!. Now i just need to go get them.. 

[JoaoPRSousa]

1 hour ago, terrytek said:

@carguy86 look at this shit on speedhunters http://www.speedhunters.com/2016/12/building-dreams-stone-motorsport/

 

So much yes

 

[JoaoPRSousa]

4 hours ago, chaozbandit said:

GET YOUR WALLETS READY

 

A Skyline GTR R33 400R just went up for auction in Japan. List date is 2016/12/09. Mileage on the car is less than 14,000 km and the list price is ¥6,800,000 (about $80,000 CAD)

 

@MEC-777 @JoaoPRSousa

 

Well, shit. I don't think 60E is enough to buy that...

Will they accept Forza credits?

[techswede]

7 minutes ago, vinyldash303 said:

Just do what carguy does and drift your way to the department store

I think i'll take a walk down to the store instead  It isn't that far

[techswede]

2 minutes ago, vinyldash303 said:

Just make sure to lock yourself out first. 

The main worry is that the key sticks in the lock. So i'll pick the new locks and keys up and then i'll be free to use pliers and hammers if need be.

[Rambi83]

My supercharged Opel Speedster.

God i wish the spring came faster here in Scandinavia.

[jasonvp]

1 hour ago, vetali said:

C6 ZR1 to C7 Z06, how is it?

It's getting cooler here and I have to drive somewhat more carefully.  Cold roads and cold tires mix poorly with cold air into the engine.  Lots more torque and no grip.  But with that in mind: the cars are two completely different things.  I loved the ZR1: it made me giggle like a stupid little school boy every time I stomped on the loud pedal.  The Z06 is that to a much larger degree.

 

The interior, comfort, amenities, etc, etc are just immensely different and substantially better in the Z06.

 

The real test will be next spring when I get it out on the track for the first time.

[Bajantechnician]

8 hours ago, JoaoPRSousa said:

It's a Flat 4. Not a V4. We, pretty much, just bash everyone that gets engine's cylinder arrangement / engine configurations wrong, until they get it right. (At least I'd do it )

I once spotted a stolen IS200 on the second hand market, and well, the stupid owner had a V6 badge on the engine (INLINE 4) and well, the guy who stole was so fucking dumb, even after taking the engine out of the car he said it was a V6. Good god. I messaged him about him being as stupid as possible and reported him. I don't want cars stolen after what happened with my dad's E34

Ahh I see lol

I meant 4 cylinder, not v4

 

But anyways, which of those cars shoud i get?

[techswede]

Just now, vinyldash303 said:

Just get out the blue tipped wrench. The one with tanks attached to it

If it was an old beater i would  The paint is still immaculate on my car though.. Didn't even want to thaw the locks with my lighter when it was really cold out.

[carguy86]

1 hour ago, terrytek said:

@carguy86 look at this shit on speedhunters http://www.speedhunters.com/2016/12/building-dreams-stone-motorsport/

 apparently the goal is to make a 1:1 car, with 650hp out of that 2jz with a 650kg car. i think that's suicide, because that's such a light ass car, with that much power.

How about the twin engines starlet? 2x 800hp in 1100kg of car.... (Its on speedhunters but its an older article, the car has changed quite a lot mechanicaly since then)

[techswede]

28 minutes ago, Rambi83 said:

My supercharged Opel Speedster.

God i wish the spring came faster here in Scandinavia.

I wish summer never left

[techswede]

Caved and bought watch dogs 2 but at the rate its downloading the world will have become a surveillance dystopia before it finishes..

[techswede]

Just now, vinyldash303 said:

As youre downloading it a revoloution starts

As i'm downloading it a revolution starts, Installs a new government, The government collapses and the old regime rises again. 

[techswede]

1 minute ago, vinyldash303 said:

Hopefully thats what happens when the united states implodes in a couple hundred years. 

Pfft.. Couple hundred. There will be a glitch in the autonomous driving system within fifty years that just wipes out 40% of the us population