What temperature do you let your CPU Get to while folding?

[Judahnator]

I havnt figured out how to overclock my Opteron 4280 yet, so im pretty solid at 50C.

 

If i figure it out ill likely overclock a bit

[hehehehhehehehe]

folding: 81

 

folding and playing: 91 tjmax on my 3930k 

That is not right for it to be getting that warm...

[spasme]

i5 3570k at 4.3GHz, never seen more than 62°C with the NH-D14.

[Giancarlo124]

My 8120 @4.3ghz never goes over 46c when folding. And my gtx 770 runs at 70c.

[RuecanOnRails]

Keep pushing hardware to the edge of stability or until you see diminishing returns. Don't be afraid of the heat, thermal limits are put in place to prevent damage.

[J4M35]

its 20 to 25 degrees inside

 

geez, somethings not right there, maybe you should try reseating it with some new thermal paste 

[Vampire2.0]

geez, somethings not right there, maybe you should try reseating it with some new thermal paste 

 

already done that

[olan1225]

My 3570k gets to just below 60°C with Antec 620, push/pull with corsair sp-fans at 12V, but during the nights i lower the fan and pump to 7V and then the temperature gets just over 70°C but it is much more quiet

[J4M35]

already done that

 

Hmm. Maybe you should start a new topic about this, someone will be able to help you

[Vampire2.0]

Hmm. Maybe you should start a new topic about this, someone will be able to help you

 

the only reasons why it gets so hot are:

 

- 3.2 stock -->> 4.4 (130watt tdp to 220watt)

-  h100 not powerfull enough

- maybe just got unluky and got a hot one that pro overclockers would bin.

 

i don't think anyone can help me except saying i should lower me clock or get costume W.C. or tec/phasechange or combo of those

[Jozi]

My 3570k stay under 60C

[Jumper118]

mine is at under 45c becuase its not a very powerful cpu with a massive heatsink

[1911]

95c for me

[urworstnit3m3r]

I7 3770 @ 4.3 @ 1.256v 70-78c depends on whether I have the heat up in the house, and how much fan noise I want to tolerate but average is probably 75c with thermaltake
frio with both fans @ 1630rpm

 

I also fold on my 760 which is at 1.2Ghz and sits at about 67c w/53% fan speed.

[Xsilent(X)]

95c for me

 

OMG you chould stop folding at that temps all the time.

[tobben]

95c for me

for the love of god ease down on that overclock.

[gastew15]

I've never seen my 6300 ever get past 55.

[Whaler_99]

Just kinda curious. I have a h100i and on quiet I get to the low 70s with a liquid temp of 43. Should I retry a thermal paste install and see if I can get the CPU temps down?  The 80*f ambient doesn't help much either.

 

Best bet - upgrade the fans to some that have excellent static pressure rating - Like noctua NF-F12's - not sure of your clearance, but if you can, also go push/pull - normally this might only get you a degree or two, but when folding, this may actually net you a few extra degree and be worth it...

[Whaler_99]

the only reasons why it gets so hot are:

 

- 3.2 stock -->> 4.4 (130watt tdp to 220watt)

-  h100 not powerfull enough

- maybe just got unluky and got a hot one that pro overclockers would bin.

 

i don't think anyone can help me except saying i should lower me clock or get costume W.C. or tec/phasechange or combo of those

 

H100 didn't come with very good fans - and a 3930 is a pro chip - if you OC'ing it and cranking it it, you need a TOP quality cooler. 

 

I would recommend either buying new fans for it, top quality static pressure based ones, like the NF-F12's, go push/pull if you can or even upgrade to a better cooler. H100i or H110 even better? Or, get yourself a large tower cooler like a Phanteks, Thermaltake Silver Arrow or the Noctua one.

[Whaler_99]

Let see...

 

Gaming Rig:

3570k @ 4.6 Ghz at full load - 38C

780 stock at full load - 38C

 

Custom water cooling FTW

 

4P Folders:

4P folders hover about 50C...

 

GPU Folders:

various GPU's, all running in the 70-85C range...

[Vampire2.0]

H100 didn't come with very good fans - and a 3930 is a pro chip - if you OC'ing it and cranking it it, you need a TOP quality cooler. 

 

I would recommend either buying new fans for it, top quality static pressure based ones, like the NF-F12's, go push/pull if you can or even upgrade to a better cooler. H100i or H110 even better? Or, get yourself a large tower cooler like a Phanteks, Thermaltake Silver Arrow or the Noctua one.

 

i turned it back down to 4.2 and changed some fans.

 

i'm using push-pull with corsair sp120 preformance and the stock fans that move allot more air than any of the other one's i have.

 

i'm getting around 75-85 on 100% cpu usage

[KatanoWaki]

A year and a half of Boinc-ing on an i7-2630qm in my Dv7 for about 12hrs a day.

 

Before replacing the crappy stock thermal paste it would idle at 40*c and as soon as you start Boinc on all cores it would spike to 100*c and throttle back.

 

After replacement it idles at 35*c and full load is about 77-86*C. It stays in turbo mode at 2.4-2.6ghz all day.

 

The fans kinda do their own thing, so I got a Stanley Blower on it and the power brick. I'm honestly impressed that laptop has taken that abuse for this long.

[Commissar]

59˚ max

Custom water cooling FTW

cpu tem right now is 47c, whilst folding... albeti at stock clock, but still....

[maddogl]

48 degrees with my 212 evo with a 4.2 overclock on a 6300.

[D3MON]

Can't monitor temps but the socket is 50*c and thats usually higher than the core temp (when i lock the cores again), im fairly confident it doesnt touch 60 which would be my limit. the plate and the heatpipes practically on the cpu are finger temperature, this in a 22 degree c ambient

my e5200 at 3.33ghz peaks at 59*c this is all when folding on maximum