Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[rfcokilljoy]

On 19/08/2018 at 8:00 PM, Jumper118 said:

i updated the sheet to page 664  

Im happy to finally be on the list! but are you going to update the single core scores? i should be very near the top

 

Thanks lots for updating it though. Don't want to beat on the guy doing something for nothing too much tbh

[Jumper118]

1 minute ago, rfcokilljoy said:

Im happy to finally be on the list! but are you going to update the single core scores? i should be very near the top

 

Thanks lots for updating it though. Don't want to beat on the guy doing something for nothing too much tbh

yes i am still updating single core scores. you can sub the single core scores if you like. you oc was quite high for an 8600k. 

 

I want  people to post as many scores as possible, but i dont update it as much as i used to, so they can take a bit longer to go on. 

[rfcokilljoy]

1 hour ago, Jumper118 said:

yes i am still updating single core scores. you can sub the single core scores if you like. you oc was quite high for an 8600k. 

 

I want  people to post as many scores as possible, but i dont update it as much as i used to, so they can take a bit longer to go on. 

That's understandable. And it was a 7600k, close ?. I wish it was an 8600k, boy does it feel good to be the last person to spend £200 on a 4 core/4 thread ?.

ps your signature is insane and I'm not sure if I want to know if it's all true or not

[Jumper118]

7 minutes ago, rfcokilljoy said:

That's understandable. And it was a 7600k, close ?. I wish it was an 8600k, boy does it feel good to be the last person to spend £200 on a 4 core/4 thread ?.

ps your signature is insane and I'm not sure if I want to know if it's all true or not

oops i miss typed  

[GoogleGonnaSaveUs]

Asus K52F
Scores before windows update:

and scores after windows update

[CrypticSnow]

[Jumper118]

8 minutes ago, CrypticSnow said:

 

I think something went wrong there, that is slower than a stock 1700 none x with 2133ram

[CrypticSnow]

7 minutes ago, Jumper118 said:

I think something went wrong there, that is slower than a stock 1700 none x with 2133ram

yea im looking into it rn. Didnt even see that b4

[CrypticSnow]

58 minutes ago, Jumper118 said:

I think something went wrong there, that is slower than a stock 1700 none x with 2133ram

Just looked through everything and my CPU is being OC'd normally. no abnormalities. looked in HWInfo as well as stressing it in CPU-Z

https://drive.google.com/file/d/16kPTdpCXUTy4tWekBY8Pa4FmZHEjyqiI/view?usp=sharing

 

and it isnt a thermal limitation

[CrypticSnow]

Problem Solved! 

[captain_cereal_hands]

So I haven't OC'ed anything yet. One of my devices is still having issues I can't figure out but here are my CineBench numbers. Also I'm running Windows 10 Pro not Windows 8.

 

I mean for stock settings it could be worse. This is my full build if your curious...

https://pcpartpicker.com/list/Z6YBzY

[Jumper118]

4 hours ago, CrypticSnow said:

Problem Solved! 

lol. looks like you still have serious issues to me. what happened to your ram  

 

1 hour ago, captain_cereal_hands said:

So I haven't OC'ed anything yet. One of my devices is still having issues I can't figure out but here are my CineBench numbers. Also I'm running Windows 10 Pro not Windows 8.

I mean for stock settings it could be worse. This is my full build if your curious...

https://pcpartpicker.com/list/Z6YBzY

window 10 is windows 8 underneath. also you need to read the op

[captain_cereal_hands]

1 hour ago, Jumper118 said:

lol. looks like you still have serious issues to me. what happened to your ram  

 

window 10 is windows 8 underneath. also you need to read the op

I did actually read it.

[Tech Wizard]

22 minutes ago, captain_cereal_hands said:

I did actually read it.

Then why did you crop your picture without CPU-Z? Attach a fullscreen picture of Cinebench + CPU-Z open

[Jumper118]

50 minutes ago, captain_cereal_hands said:

I did actually read it.

why did you fail so hard then to follow the instructions? 

[DildorTheDecent]

4 hours ago, Jumper118 said:

why did you fail so hard then to follow the instructions? 

Because the font isn't bright nor big enough, duh!

[CrypticSnow]

7 hours ago, Jumper118 said:

lol. looks like you still have serious issues to me. what happened to your ram  

 

window 10 is windows 8 underneath. also you need to read the op

My ram is completely fine. Running at 3000MHz as it is supposed to be

[glenalz81]

1 minute ago, CrypticSnow said:

My ram is completely fine. Running at 3000MHz as it is supposed to be

It's running 2666 going on your latest pic.

[CrypticSnow]

8 minutes ago, glenalz81 said:

It's running 2666 going on your latest pic.

my cpu-z pic was from an earlier bench and the cinebench was the most recent

 

 

[CrypticSnow]

Last time... My BIOS had updated and reset my RAM profile

[Jumper118]

3 hours ago, CrypticSnow said:

Last time... My BIOS had updated and reset my RAM profile

That is still terrible, but at least you have done the screenshot correctly unlike some people, so I will put it on the sheet at some point. 

[CrypticSnow]

51 minutes ago, Jumper118 said:

That is still terrible, but at least you have done the screenshot correctly unlike some people, so I will put it on the sheet at some point. 

how is that terrible. it is in line with benchmarks from other 2700X's. I have looked at their scores as well. I'm in line. also, consider the fact that I'm not overclocking my CPU. its still sitting at the base 3.7GHz

[Jumper118]

3 hours ago, CrypticSnow said:

how is that terrible. it is in line with benchmarks from other 2700X's. I have looked at their scores as well. I'm in line. also, consider the fact that I'm not overclocking my CPU. its still sitting at the base 3.7GHz

its inefficient. if you look at the sheet the average score not including my sub zero score for a 2700X is 1900.875cb. even the average 1700, which is a previous gen, bottom bin part average is higher than your score. your £/performance is not good. even with a stock cooler that cpu should be able to boost to 4ghz.

[captain_cereal_hands]

First of all to note when I did that test it was like an hour after reading that first post so I had forgotten about the CPUZ part which I at the time didn't even have downloaded. I cropped the image cause there was nothing else even loaded. Now cause I guess more information is always better here is both programs. Still to note I haven't OC'ed anything but I think I'm gonna do a fresh install and OC it plus it might finally get rid of my software problem. 

[Dabombinable]

Re-did my QX6850 in R11.5 with the rig as a whole performing far better than it did with the newest BIOS, and in R15 its only 2 points behind what it was at 3.6GHz. Seems that the P5Q Deluxe doesn't want to be put out of its misery: