pc unable to boot up

[Scitesh]

I am trying to turn on my PC but it's not turning on and going down one of the following paths

motherboard screen says "starting automatic repair" and then I see a bsod with stopcode 0x000021a

I see the login screen then as soon as I send a input (move mouse or type)

It bsods and I see the error message bad system config info

 

is there some way of fixing this ?

my motherboard is x470 tomahawk max 

[mrtwonavels]

40 minutes ago, Scitesh said:

I am trying to turn on my PC but it's not turning on and going down one of the following paths

motherboard screen says "starting automatic repair" and then I see a bsod with stopcode 0x000021a

I see the login screen then as soon as I send a input (move mouse or type)

It bsods and I see the error message bad system config info

 

is there some way of fixing this ?

my motherboard is x470 tomahawk max 

Try resetting the bios. If you don’t know how to I can walk you through the steps 

[Scitesh]

34 minutes ago, mrtwonavels said:

Try resetting the bios. If you don’t know how to I can walk you through the steps 

is it the remove cmos and wait 5 mins trick?

[OddOod]

48 minutes ago, Scitesh said:

is it the remove cmos and wait 5 mins trick?

also unplug and hit the power button a couple times

[Bjoolz]

0xc000021a is Winlogon_Fatal_Error which usually means that the OS install is corrupted. When you have corruption, you have to consider that the storage could be faulty. 

[spunk.funk]

As stated, the chances are great that your HDD/SSD has failed. 

You can remove the drive an attach it to a working computer via a USB Adapter with a power adapter. Once powered up, see if the drive is making noise are is totally cold dead. If so, it needs to be replaced.

If it sounds healthy, you can plug in it's USB cable to the working computer and see if the drive is recognized. If so, you can remove the files off of it and replace the drive with an SSD.