Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Ground]

On 16/09/2018 at 9:36 PM, Jumper118 said:

 

And I just got a pair of much better quads that I'll run on dice before degrading them on air unlike that one... Max BCLK 270&265 under air, 4.74 and 4.78GHz R15 at 1.4V, 3800 and 4100 uncore at 1.4V, both manage DDR3 1940. Too lazy to run these more under air now, you'll have to wait a bit for actual results

Incomplete pic, but I'll run the best of each type under dice next month. 

34xE5606 (best one does 271.26 BCLK at ambient)

24xW3520 (best one does 238 BCLK at ambient)

12xW3530 (haven't tested these)

7xE5640 (two best ones listed above)
3xE5620 (best one does 256, second best 251. BCLK is limiting on these)
1xE5649 269.65 BCLK, 4.76 R15 at 1.4V, 2240 RAM, 4100 Uncore at 1.4V QPI

 

I need to get some more, but bulk lots are difficult to find sadly

[Jumper118]

3 hours ago, Ground said:

And I just got a pair of much better quads that I'll run on dice before degrading them on air unlike that one... Max BCLK 270&265 under air, 4.74 and 4.78GHz R15 at 1.4V, 3800 and 4100 uncore at 1.4V, both manage DDR3 1940. Too lazy to run these more under air now, you'll have to wait a bit for actual results

 

Incomplete pic, but I'll run the best of each type under dice next month. 

34xE5606 (best one does 271.26 BCLK at ambient)

24xW3520 (best one does 238 BCLK at ambient)

12xW3530 (haven't tested these)

7xE5640 (two best ones listed above)
3xE5620 (best one does 256, second best 251. BCLK is limiting on these)
1xE5649 269.65 BCLK, 4.76 R15 at 1.4V, 2240 RAM, 4100 Uncore at 1.4V QPI

 

I need to get some more, but bulk lots are difficult to find sadly

That is a decent collection you should have quite a few top chips there! Good effort. 

[Guest]

10 hours ago, Jumper118 said:

 

 

triple channel mammal 

What memory are you using?

[Jumper118]

2 hours ago, Densetsu said:

What memory are you using?

2 gskill 3200c14 and 1 stick of galax hof 4000c19

[ryzenuser]

is running cinebench is same as playing any high end game?

[bleechSNAK3]

[bleechSNAK3]

1 minute ago, bleechSNAK3 said:

btw this is with a stock cooler

[Tech Wizard]

2 minutes ago, bleechSNAK3 said:

 

Side note: Halo CE <3

[agent_x007]

Spectre/Meltdown comparison on fastest pre-Haswell CPU.
Microcode used : 0x42D
Windows patch "KB4100347" is installed in both cases.

"RTX On" : 


"RTX Off" : 

[Jumper118]

the mighty 1680 v2

[Tech Wizard]

21 minutes ago, agent_x007 said:

Spectre/Meltdown comparison on fastest pre-Haswell CPU.

Omg, I need it. Gief it to meh please!

 

 

[Jumper118]

3 minutes ago, Tech Wizard said:

Omg, I need it. Gief it to meh please!

 

 

https://www.ebay.co.uk/itm/Intel-Xeon-E5-1680-V2-3-0GHz-8-Core-16-Threads-LGA2011-SR1MJ-CPU-Processors/263900038643?hash=item3d71ab05f3:g:bVAAAOSwmBdbgsS7

 

more than i can afford as well. its £50 more than my threadripper................. 

[agent_x007]

To anyone interested : 
Air cooling is fine, as long as you have fan on the back of the board to cool "CPU package" or back of the socket directly. I don't have it
At 4,5GHz my chip needs at least Vcore = 1,45V, which is WAY too much for my cooling. I will try to do a run later (but throttling probably will steal any perf. it gives me).

PS. @Jumper118 It's not THAT bad... if you live in US : LINK.
For EU, we have : LINK

[Jumper118]

14 hours ago, agent_x007 said:

To anyone interested : 
Air cooling is fine, as long as you have fan on the back of the board to cool "CPU package" or back of the socket directly. I don't have it
At 4,5GHz my chip needs at least Vcore = 1,45V, which is WAY too much for my cooling. I will try to do a run later (but throttling probably will steal any perf. it gives me).

PS. @Jumper118 It's not THAT bad... if you live in US : LINK.
For EU, we have : LINK

its still more than my threadripper  

[agent_x007]

Managed to do 4,5GHz without droping too much perf along the way 


Other Cinebench scores :
R11.5


2003 :

[Tech Wizard]

34 minutes ago, agent_x007 said:

Managed to do 4,5GHz without droping too much perf along the way 

What's going on with scaling? +28 cb for +100MHz on 16 threads?

[agent_x007]

Well, the other guy with 1680 v2 that is on R15 list managed 1669 with 4,6GHz...
He probably used different memory, but still, it scaled better than mine

[Tech Wizard]

8 minutes ago, agent_x007 said:

Well, the other guy with 1680 v2 that is on R15 list managed 1669 with 4,6GHz...
He probably used different memory, but still, it scaled better than mine

I get around +32-33 cb from going +100MHz on my 4930K, which only has 12 threads. I would assume with +100MHz on 16 threads, you would get at least +40 cb. Oh well, nice score anyways

[agent_x007]

2 hours ago, Tech Wizard said:

I get around +32-33 cb from going +100MHz on my 4930K, which only has 12 threads. I would assume with +100MHz on 16 threads, you would get at least +40 cb. Oh well, nice score anyways

Thanks !
Like I said : Cooling is an issue when CPU has as many cores as MB phases (FYI : Sabertooth X79 has 4 doubled phases).

Also, I think my CPU is an avarage clocker (worse than 4960X I own).

[Tech Wizard]

2 hours ago, agent_x007 said:

Thanks !
Like I said : Cooling is an issue when CPU has as many cores as MB phases (FYI : Sabertooth X79 has 4 doubled phases).

Also, I think my CPU is an avarage clocker (worse than 4960X I own).

I hate Ivy-E so much you have no idea. I want to smash every HEDT 22nm I see with a sledgehammer. I've had 5x 4930Ks, and one 4820K, and none of those 6 chips could do anything higher than 4,6GHz at like 1.6V. Curse Ivy-E!

[agent_x007]

So I lucked out with my 4960X then (FYI : batch #3333B476).

[IronMidHeaven]

[pakhtunov]

[Tech Wizard]

20 hours ago, agent_x007 said:

So I lucked out with my 4960X then (FYI : batch #3333B476).

What did you get it up to max, and voltage? 

Fyi: 4605MHz @ 1.55V was my highest 4930K.

[agent_x007]

Same : I tried 1.55V as max. on Vcore.
4,6GHz still gave me a BSOD with E5-1680 v2.

@Tech Wizard As for 4960X, I got 4,8GHz stable for 2003 with 1,48V.
4,73GHz passed R15 with ~1,48V : LINK.

4,8GHz was maxed I tried so far and I never went above 1,5V on it.
With backup X79 board (when I get it... some day), I plan to do 4,9GHz