Jump to content

Smallest itx case that would fit 280+120 aio?

pzspah

What's the smallest itx case that would fit a 280 and a 120 aio?

Already have a Nano S, but it wastes space internally. Hardware in question is an EVGA 280 and a MSI Seahawk.

Link to comment
Share on other sites

Link to post
Share on other sites

280 +120 aio? Like 280 aio for cpu and 120 for gpu or something? 

Edited by ManEatingFridge
OP fixed it

Send help

Link to comment
Share on other sites

Link to post
Share on other sites

19 minutes ago, pzspah said:

What's the smallest itx case that would fit a 280 and a 120 aio?

Well Mesify C Mini should be a sensible choice and would fit those aios (assuming the usual Asetek rad thickness). I don't know of any itx only cases that have room for a 280. Why do you want as small as possible?

Send help

Link to comment
Share on other sites

Link to post
Share on other sites

10 minutes ago, ManEatingFridge said:

Well Mesify C Mini should be a sensible choice and would fit those aios (assuming the usual Asetek rad thickness). I don't know of any itx only cases that have room for a 280. Why do you want as small as possible?

In Meshify C mini watch out for max width of rad and also for length of your GPU + rad thickness as it doesn't have a lot of space for GPU

Link to comment
Share on other sites

Link to post
Share on other sites

Oh no, it doesn't support additional 120 rad... Oops forgot about it. If 120 is essential for you I am maybe going to find smth else.

Link to comment
Share on other sites

Link to post
Share on other sites

9 hours ago, Trig Gaveol said:

Core 500 from Fractal can also fit 280 + 120 rads but there are some limitations once again

 

 

That would be great, but it doesn't fit the rear fan/rad and a radiator ontop at the same time

Link to comment
Share on other sites

Link to post
Share on other sites

10 hours ago, pzspah said:

What's the smallest itx case that would fit a 280 and a 120 aio?

Already have a Nano S, but it wastes space internally. Hardware in question is an EVGA 280 and a MSI Seahawk.

There is none because ITX is too small for that.

"Hell is full of good meanings, but Heaven is full of good works"

Link to comment
Share on other sites

Link to post
Share on other sites

The Thermaltake V1 can fit a 240mm in the front, and with modification maybe a 120 in the back? But it comes with some tiny 80mm fans there as standard(and a 200mm in the front)


 

⠀⠀⠀⣴⣴⡤
⠀⣠⠀⢿⠇⡇⠀⠀⠀⠀⠀⠀⠀⢰⢷⡗
⠀⢶⢽⠿⣗⠀⠀⠀⠀⠀⠀⠀⠀⣼⡧⠂⠀⠀⣼⣷⡆
⠀⠀⣾⢶⠐⣱⠀⠀⠀⠀⠀⣤⣜⣻⣧⣲⣦⠤⣧⣿⠶
⠀⢀⣿⣿⣇⠀⠀⠀⠀⠀⠀⠛⠿⣿⣿⣷⣤⣄⡹⣿⣷
⠀⢸⣿⢸⣿⠀⠀⠀⠀⠀⠀⠀⠀⠈⠙⢿⣿⣿⣿⣿⣿
⠀⠿⠃⠈⠿⠆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠹⠿⠿⠿

⠀⢀⢀⡀⠀⢀⣤⠀⠀⠀⠀⠀⠀⠀⡀⡀
⠀⣿⡟⡇⠀⠭⡋⠅⠀⠀⠀⠀⠀⢰⣟⢿
⠀⣹⡌⠀⠀⣨⣾⣷⣄⠀⠀⠀⠀⢈⠔⠌
⠰⣷⣿⡀⢐⢿⣿⣿⢻⠀⠀⠀⢠⣿⡿⡤⣴⠄⢀⣀⡀
⠘⣿⣿⠂⠈⢸⣿⣿⣸⠀⠀⠀⢘⣿⣿⣀⡠⣠⣺⣿⣷
⠀⣿⣿⡆⠀⢸⣿⣿⣾⡇⠀⣿⣿⣿⣿⣿⣗⣻⡻⠿⠁
⠀⣿⣿⡇⠀⢸⣿⣿⡇⠀⠀⠉⠉⠉⠉⠉⠉⠁

 

Link to comment
Share on other sites

Link to post
Share on other sites

2 hours ago, Stefan Payne said:

There is none because ITX is too small for that.

You do know the nano s is an itx case right? Thus negating your entire statement.

Link to comment
Share on other sites

Link to post
Share on other sites

16 hours ago, pzspah said:

Already have a Nano S, but it wastes space internally.

Every mITX cases that can support a 280 rad is the size of the Nano S already, or bigger.

 

NZXT H200

NZXT Manta

Evlov ITX

Core 500

Thermaltake Core X1

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites

Link to post
Share on other sites

9 hours ago, pzspah said:

You do know the nano s is an itx case right? Thus negating your entire statement.

Its not an ITX Case that makes sense.

With THAT Size, a µATX Tower wouldn't have been noticable bigger and thus makes little to no sense to even exist.

 

With ITX you want to save space and have a small footprint.

YOU want to do something that makes ITX total bullshit and for you µATX would have made much more sense.

"Hell is full of good meanings, but Heaven is full of good works"

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×