Jump to content

[Build Log] Project Frost - Case-Labs THW10 | X99 Watercooled | i7 6950X | Titan X | Borosilicate Glass Tubing

Revan654
By Revan654
in Build Logs
 Share
Posted
Just now, Revan654 said:

Paracord is to thin for my liking (Plus a PIA). I think IceModz uses a mix of HWT & TKG for their connectors. There wiring is one of the best(Copper plated). I'm not a fan of HWT but TKG has amazing quality.

 

I personally use JMT connectors & terminals. There only two places I know of that sells them.

 

32 minutes ago, MeDownYou said:

I'd agree with you here MDPC-X is the best sleeving you can buy. I personally prefer the look of paracord even though it's being a pain in the rear to work with for me though. I got my own quality wire for my cables that i'm making as most of the companies give you mediocre wire. Gotta give props to icymodz for their connectors though.

IMO paracord looks the best. i have never had sleved cables on hand but from what i have seen in picrures and videos i like the look of it the best

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
15 minutes ago, Revan654 said:

Finally, The Matte version of the Vision Touch Table top unite have shipped out. For those keeping track, It took five months to get ahold of one.

 

 

Now I have one Matte version & one Glossy version.

wait for glossy to go out of stock and sell it for enough to pay for this machine lol

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
8 hours ago, Bananasplit_00 said:

wait for glossy to go out of stock and sell it for enough to pay for this machine lol

 

like now(They kept those touch units in stock). The one store who told me that Matte version would not arrive until May was correct all the way back in January. They knew more then Aqua-Computer.

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 hours ago, Revan654 said:

Finally, The Matte version of the Vision Touch Table top unite have shipped out. For those keeping track, It took five months to get ahold of one.

-SNIP-

Now I have one Matte version & one Glossy version.

Good to hear that you finally have it ;) When are we going to get more pics? :D 

 

1 hour ago, Revan654 said:

They knew more then Aqua-Computer.

 heh xD 

Main Rig - AMD Ryzen 1800X @ 3.9 - NZXT Kraken X62 - MSI X370 SLI PLUS - G.Skill TRIDENT Z RGB 16GB 2667MHz - 2 x Gigabyte GeForce GTX1080 WindForce OC - NZXT S340 (Purple-White) - OCZ 120GB, Seagate 1TB - Corsair RM750i 80+ Gold - SAMSUNG S24D590 24", HP L1950g - Logitech G810 Orion Spectrum - Logitech G502 Proteus Spectrum - Creative Cambridge Sound Works + two random Philips speakers, Logitech G430 headset - Win 10 Pro x64

Retro Gaming PC - ASUS T3

Server - HP ProLiant DL380 G6(Currently assembling it) - 2 x Intel Xeon E5520 2.26GHz 8MB Quad Core Processor

NAS - Zyxel NSA320S 2 x Seagate Constellation ES 2TB(RAID1) - QNAP TS-212 1 x 500GB

 

-=Logitech FanBoiiiiiiii=-

I love NZXT as well <3

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i have the feeling we need another 20 pages to get to the finish line ;)

though cool build and cool system, I'm really looking forward to see the end result!

GUITAR BUILD LOG FROM SCRATCH OUT OF APPLEWOOD

 

- Ryzen Build -

R5 3600 | MSI X470 Gaming Plus MAX | 16GB CL16 3200MHz Corsair LPX | Dark Rock 4

MSI 2060 Super Gaming X

1TB Intel 660p | 250GB Kingston A2000 | 1TB Seagate Barracuda | 2TB WD Blue

be quiet! Silent Base 601 | be quiet! Straight Power 550W CM

2x Dell UP2516D

 

- First System (Retired) -

Intel Xeon 1231v3 | 16GB Crucial Ballistix Sport Dual Channel | Gigabyte H97 D3H | Gigabyte GTX 970 Gaming G1 | 525 GB Crucial MX 300 | 1 TB + 2 TB Seagate HDD
be quiet! 500W Straight Power E10 CM | be quiet! Silent Base 800 with stock fans | be quiet! Dark Rock Advanced C1 | 2x Dell UP2516D

Reviews: be quiet! Silent Base 800 | MSI GTX 950 OC

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
12 hours ago, Marine_Boy said:

Good to hear that you finally have it ;) When are we going to get more pics? :D 

 

 heh xD 

 

For vision touch unit you will not see any until the PC is finished(I'm not opening the box since I don't want the unit covered in dust from tube cutting). Any device that lays on the outside of the PC will remain sealed until the very end(All my new cables are still sealed in the shipping boxes).

 

For more photos of build, I can add some. Allot of things right now are things that has been seen already (Fan cables, USB cables, PSU cables). It just takes time to build the cables. Since I don't have four or five different color wiring I have to come up more creative ways to figure out which cable is the starting point (Fan & USB cables). Since they get mixed up when sleeving them through.

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 hours ago, 19_blackie_73 said:

i have the feeling we need another 20 pages to get to the finish line ;)

though cool build and cool system, I'm really looking forward to see the end result!

Maybe, If I can going to try to get more fans so I can do push/pull setup Running them at 600 rpms). That might push it a few extra pages. Going to try not to spend any extra money If I can help it. Since I have everything I need right now.

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
On 9/7/2016 at 7:34 AM, Revan654 said:

Hardware Parts:

 

Storage

 

Samsung 960 Pro 1TB M.2
Samsung 960 Evo 1TB M.2
Western Digital 6TB (Green)
Western Digital 6TB (Green)
Western Digital 6TB (Green)
Western Digital 6TB (Green)
Western Digital 6TB (Blue)
Western Digital 6TB (Blue)
Samsung Evo 850 2TB(Raid 0)
Samsung Evo 850 2TB(Raid 0)
Samsung Evo 850 2TB(Raid 0)

 

Motherboard

 

Asus Rampage V Edition 10

 

CPU Processor

 

Intel Core i7-6950X 10-Core

 

Memory

 

Corsair Dominatior Platinum 32 GB (4x8GB) 3200 Mhz Blackout Edition
Corsair Dominatior Platinum 32 GB (4x8GB) 3200 Mhz Blackout Edition

 

Case & Case Parts

 

CaseLabs THW10 Computer Case
Mod-One Custom Made Feet
Bottom Accessory Mount - Style: 140mm Single (140.1)
Bottom Accessory Mount - Style: 140mm Single (140.1)
Flex-Bay (120.1)
Flex-Bay (120.1)
Flex-Bay (120.2)
Flex-Bay (140.3)
Flex-Bay (140.3)
Flex-Bay 5.25 Device Mount - Short
Flex-Bay 5.25 Device Mount - Short HD
Flex-Bay 5.25 Device Mount - Short SD
Flex-bay 5.25 Device Mount - Short Nonconforming

 

Power Supply & Accessories

 

EVGA SuperNOVA 1600 T2
MDPC-X Sleeving (Black)
Darkside Sleeving 2mm (Black)
16 & 18 AWG Wire
CableMod ModFlex Molex Extension 45cm
CableMod ModFlex Molex to 3 x Molex Adapter
Cablemod Custom made Sata Power Cables - Black

 

Graphic Card

 

 Nvidia GeForce GTX Titan X

 

Lighting

 

Darkside LED UV 12"
Darkside LED RGB 19"
Darkside LED UV 5mm
AquaCompter LED RGB 5mm

 

Cables

 

CableMod ModFlex Internal USB 30cm
CableMod ModMesh SATA 3 (6GB/s) Cable - 12"
CableMod ModMesh SATA 3 (6GB/s) Cable - 24"
Aquacomputer Aquabus Cable 4-Pin
CableMod ModFlex 4-pin Fan Cable Extension 30cm
CableMod ModFlex 4-pin Fan Cable Extension 60cm
CableMod ModFlex 4-pin Fan Cable Extension 90cm

 

Case Fans

 

BeQuiet Silent Wings 3 140 PWM
BeQuiet Silent Wings 3 120 PWM

 

Other Hardware Parts

 

Aquacomputer HUBBY7 internal USB 2.0 Hub
Aquacomputer HUBBY7 internal USB 2.0 Hub
Aquacomputer SPLITTY9 Splitter
Aquacomputer SPLITTY9 Splitter
Aquacomputer SPLITTY9 Splitter
Aquacomputer SPLITTY9 Splitter
Aquacomputer Kryo M.2 PCIe 3.0
Aquacomputer Temperature Sensor 70 cm for VISION

 

Dust Filters

 

DEMCiflex Magnetic Fan Dust Filter Flex-Bay 140.3
DEMCiflex Magnetic Fan Dust Filter Flex-Bay 140.3
DEMCiflex Magnetic Fan Dust Filter Flex-Bay 120.1
DEMCiflex Magnetic Fan Dust Filter Flex-Bay 120.1
DEMCiflex Magnetic Fan Dust Filter Flex-Bay 120.2
DEMCiflex Magnetic Fan Dust Filter Flex-Bay 140.2

 

Capture Card

 

Magewell 4K Plus

 

WaterCooling Parts

 

Waterblocks

 

Aquacomputer Kryo M.2
EK-FB ASUS R5-E10 Monoblock RGB Edition
WaterCool HeatKiller IV for Titan X (Pascal) - Acetal Nickel

 

Waterblock Accessories

 

Thermal Girzzly Thermal Compound
Thermal Girzzly Thermal Pads
WaterCool HeatKiller IV eBC - Backplate for GTX 1080, 1070 and Titan X (Pascal)
VISION connection terminal for kryographics
Aquacomputer Filter

 

Radiators

 

Hardware Labs Black Ice SR2 Multiport 560mm
Hardware Labs Black Ice SR2 Multiport 560mm
Hardware Labs Black Ice SR2 Multiport 420mm
Hardware Labs Black Ice SR2 Multiport 420mm

 

Radiator Accessories

 

Hardware Labs Black Ice Mount Screws M4 x 30mm Black
Hardware Labs Black Ice Mount Screws M4 x 28mm Black
Hardware Labs Black Ice Mount Screws M4 x 8mm Black
Hardware Labs Black Ice Mount Screws M4 x 5mm Black
PC Radiator Mount Screws M4 x 35mm Black

 

Fans

 

Corsair 140 ML Pro Premium Magnetic Levitation

 

Fan Controller

 

Aquacomputer Aquaero 6 XT Blue
Aquacomputer Aquaero 6 XT Blue
Aquacomputer Power Adjust 3
Aquacomputer Power Adjust 3

 

Fan Controller Accessories

 

Aquacomputer Passive Heatsink
Aquacomputer Front Faceplate for Aquaero 5/6 XT Aluminium - Black
Aquacomputer Bezel for Power Adjust 3
VISION Touch table top unit, matte nickel plating, IR receiver and ambient temperature sensor

 

Tubing

 

AlphaCool 16mm Tubing
EK-Tube ZMT Rubber 3/8 x 5/8

 

Pumps

 

Aquacomputer D5 Pump Mechanics With USB and Aquabus Interface
Aquacomputer D5 Pump Mechanics With USB and Aquabus Interface

 

D5 Pump Top & Accessories

 

EK XTop Revo D5 Acetal
EK XTop Revo D5 Acetal
HeatKiller Rubber anti-vibrations Screws

 

Coolant

 

EK-Ekoolant EVO Liquid Coolant - UV Blue
Mayhems Blitz Part One
Mayhems Blitz Part Two

 

Fittings

 

Bitspower Stop Fitting
Bitspower LED Stop Fitting
EK LED Stop Fitting
Aquacomputer LED Stop Fitting
Aquacomputer Temperature Sensor - Inner/Outer Thread G1/4
Aquacomputer Temperature Sensor - Inner/Outer Thread G1/4 (Vision Version)
Bitspower Premium G1/4" Stop Fitting
Bitspower Dual Rotary Angle Extender
Bitspower Dual Rotary Angle Extender
Bitspower 90-Degree With Dual Rotary Extender
Bitspower 60-Degree Extender
Bitspower 30-Degree Extender
Bitspower 45-Degree Extender
EK-AF Pass-Through
EK-AF Fill-Port
Bitspower Matte Black Dual Rotary Mini Valve With G1/4" Extender
Monsoon Premium G 1 / 4 Plug
Aquacomputer G1/4 Temperature Sensor
Aquacomputer G1/4 Temperature Sensor(Vision Version)
Aquacomputer G1/4 Flow Indicator | High Flow - USB
Bitspower G1/4" Matte Black Enhance Multi-Link For OD 16MM
Bitspower Matt Black T-Block With Triple IG1/4"
Bitspower 5mm Spacer Extender Adapter - G1/4 Male/Male - Matt Black
Bitspower 15mm Spacer Extender Adapter - G1/4 Male/Male - Matt Black
Bitspower 30mm Spacer Extender Adapter - G1/4 Male/Male - Matt Black
Bitspower 3-way Splitter, T Block Crossconnect Adapter - Matte Black
Bitspower 2-way L Block Crossconnect Adapter - Matte Black
Barrow Manual Exhaust
Pressure Equalization Membrane


Reservoirs

 

HeatKiller Tube 200
HeatKiller Tube 200
Aquacomputer Aquatube Multirole Reservoir | Black

 

Reservoirs Accessories

 

HeatKiller Tube Multi Top
HeatKiller Tube Basic Mount
HeatKiller Tube S LED Blue
Aquacomputer Aquajet Flush Tube for Aquatube G1/4
Aquacomputer Aquabay AT Rev 1.5 Baydream
Aquacomputer Faceplate for Aquatube - Aluminum - Black


Color Index

Green = Already Have
Blue = Waiting to be Shipped
Red = Need to Buy

bruuhhhh op asf

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

@Revan654 Still remember this being posted, it has been a minute!

 

How much time do you think it will take? Can't wait to see the pictures of the finished beast

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
12 hours ago, ShatteredPsycho said:

@Revan654 Still remember this being posted, it has been a minute!

 

How much time do you think it will take? Can't wait to see the pictures of the finished beast

 

Have no idea, I'm hoping to have everything done sometime in June. There been some days I should have worked on it but I started to watch Amazon video for like 4 hours instead.

 

There are other times that shipping holds me up since I don't have the part to build what's next.

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
11 hours ago, Revan654 said:

 

Have no idea, I'm hoping to have everything done sometime in June. There been some days I should have worked on it but I started to watch Amazon video for like 4 hours instead.

 

There are other times that shipping holds me up since I don't have the part to build what's next.

Yeah I saw your shipping delays and other issues.

Well, hope you make it by june!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I will not be able to post any photos until Comcast fixes my cable line. My connection keeps dying any time I try to download or upload anything larger then 2 mb.

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Revan654 said:

I will not be able to post any photos until Comcast fixes my cable line. My connection keeps dying any time I try to download or upload anything larger then 2 mb.

wow that freaking sucks...

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 5/29/2017 at 3:58 PM, Bananasplit_00 said:

wow that freaking sucks...

I have a very long history with Comcast not working, That was mainly at my old house. The things I been told by there customer service reps were down right insane.

 

This was the first real issue I have had with comcast where I live now. Comcast is the only real option when it comes to good & fast internet service.

 

 

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
23 minutes ago, Revan654 said:

Anyone who going to be soldering, remember to pick up a Respirator with the proper filters. You don't want to be inhaling lead fumes.

or, you know, you use lead free stuff and just have decent ventilation

I spent $2500 on building my PC and all i do with it is play no games atm & watch anime at 1080p(finally) watch YT and write essays...  nothing, it just sits there collecting dust...

Builds:

The Toaster Project! Northern Bee!

 

The original LAN PC build log! (Old, dead and replaced by The Toaster Project & 5.0)

Spoiler

"Here is some advice that might have gotten lost somewhere along the way in your life. 

 

#1. Treat others as you would like to be treated.

#2. It's best to keep your mouth shut; and appear to be stupid, rather than open it and remove all doubt.

#3. There is nothing "wrong" with being wrong. Learning from a mistake can be more valuable than not making one in the first place.

 

Follow these simple rules in life, and I promise you, things magically get easier. " - MageTank 31-10-2016

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
5 hours ago, Bananasplit_00 said:

or, you know, you use lead free stuff and just have decent ventilation

 

Lead is better to use for this situation, Lead Free requires more work & also requires a higher temperature. Most sleeving shop use the lead base soldering wire. Plus Lead free soldering is more expensive.

Current Build: Project Frost
Gaming Rig Build: Project Ice Dragon

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Build Logs

×