Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[rtsurfer]

DDR3 here is hot hot hot

Im gonna flip most of em

i can prolly get 60 for each 2x4gb kit

the 2x2gb kit is basically presold

i may keep one set of the 2400 gskill cause i always wanted the tridents. lower trfc i think

The Tridents are cool. Not the best, but I will try to find & share with you a profile I had for benching. Decrease your work.

[Darkman]

2nd haul was pretty good too

 

70cdn

 

p7p55-m

990fx ud3

 

1055T

i3 530

 

thermaltake water 2.0

 

 

We open for business

That i3 530 and p7p55-m makes me miss the i5 650 I used to have to run daily on a dell motherboard.

[Raudi_]

@Gofspar is still slower.

[Gofspar]

@Gofspar is still slower.

you have ddr3..

[Lays]

I actually managed to run 2400 mhz ram at 13-13-13-14 1T TRFC 240 for XTU as well, will post my score in the XTU thread.

[Br3tt96]

I actually managed to run 2400 mhz ram at 13-13-13-14 1T TRFC 240 for XTU as well, will post my score in the XTU thread.

That's impressive!

[Lays]

That's impressive!

 

It doesn't seem to matter at all though.. In pi-fast and stuff it does, but in xtu and cinebench it doesn't seem to do anything at all.

[Jumper118]

Had a pretty nice Haul today

 

heres what I got for 240 cdn

 

4x4gb gskill trident 2400mhz cl 10

2x4gb hyperx predator 2133mhz cl 11

2x2gb gskill 1600mhz cl9

1x2gb1333mhz cl9

1x1gb ddr2 800mhz

 

955 BE

1050T

e6300

e6550

e7500

 

890fx ud5

CFZ

 

5870 vapour X

evo 212

coolermaster V8

cheap xonar sound card

2nd haul was pretty good too

 

70cdn

 

p7p55-m

990fx ud3

 

1055T

i3 530

 

thermaltake water 2.0

 

 

We open for business

thats a lot of stuff! 

[Onur_Tyran]

[Jumper118]

 

need to have cpuz in the screenshot please.

[Lays]

Going to the store tomorrow/ today to get ice-maker trays, so I can ice bench the 5820k

[rtsurfer]

@ProKoN

 

1.65-1.7V. Gave me the best performance in XTU on these sticks. Lower tRAS a bit if you can't get it to work. And remember, only 2 sticks at a time.

 

[ProKoN]

@ProKoN

 

1.65-1.7V. Gave me the best performance in XTU on these sticks. Lower tRAS a bit if you can't get it to work. And remember, only 2 sticks at a time.

 

 

thank you. the secondary \ tertiary timings are very helpful

 

i was able to drop the TRFC to 95 upon initial testing

 

will give these a go later.

[Raudi_]

thank you. the secondary \ tertiary timings are very helpful

 

i was able to drop the TRFC to 95 upon initial testing

 

will give these a go later.

Timings confuse me quite a bit never understood them.

Sidenote: this 4770k is so fucked over, was redoing my OC and it won't even do 4.4 at 1.42v with a vccin of 2.0 and a PCH voltage of 1.0

[rtsurfer]

thank you. the secondary \ tertiary timings are very helpful

i was able to drop the TRFC to 95 upon initial testing

will give these a go later.

Mine wouldn't go below 195. Try these and if you can still get it to 95, then let me know, that might open up an interesting possibility.

Timings confuse me quite a bit never understood them.

Sidenote: this 4770k is so fucked over, was redoing my OC and it won't even do 4.4 at 1.42v with a vccin of 2.0 and a PCH voltage of 1.0

Not to be a d***

If you are in the market for an above average 4790K.

Let me know. [emoji6]

[Raudi_]

Mine wouldn't go below 195. Try these and if you can still get it to 95, then let me know, that might open up an interesting possibility.

Not to be a d***

If you are in the market for an above average 4790K.

Let me know. [emoji6]

I might be in a few weeks, need to start prepping for Skylake and LN2 fun

[rtsurfer]

I might be in a few weeks, need to start prepping for Skylake and LN2 fun

Skylake coming at IDF in August.

Not 100% sure, but trustworthy insider info. [emoji6]

And hope you have better luck getting ln2 then me.

[Raudi_]

Skylake coming at IDF in August.

Not 100% sure, but trustworthy insider info. [emoji6]

And hope you have better luck getting ln2 then me.

33 Local results I might have some luck

[rtsurfer]

33 Local results I might have some luck

Well let me tell you what troubles I faced.

I have a place less than 1 mile from my house. But they don't have smaller tanks.

Ala, nothing less than 180Litres & also they don't deliver to residential addresses (its not legally allowed, I think).

The second option I have is to buy my own dewar tank which can cost a bit. Then get it filled from that place. But to add to troubles, I need a pickup truck to carry it & the price/litre they gave me was too high.

Also big places like Airgas & Linde require you to have a certified dewar or they won't fill it.

[Raudi_]

Well let me tell you what troubles I faced.

I have a place less than 1 mile from my house. But they don't have smaller tanks.

Ala, nothing less than 180Litres & also they don't deliver to residential addresses (its not legally allowed, I think).

The second option I have is to buy my own dewar tank which can cost a bit. Then get it filled from that place. But to add to troubles, I need a pickup truck to carry it & the price/litre they gave me was too high.

Also big places like Airgas & Linde require you to have a certified dewar or they won't fill it.

Hmmm damn good thing I'm prepping now for it then.

[rtsurfer]

Hmmm damn good thing I'm prepping now for it then.

Yes. Gotta jump through quite some hoops.

With CPU pot + GPU pot + DMM + Thermometers + Dewar tank (if you need to get one) + Ln2 costs.

It will be around $1000 or more before you get to do an LN2 run. This is assuming you buy high end pots & doesn't include other insulation stuff or actual hardware you use or kill due to moisture or something. It's gonna be pricey. Take your time.

[Raudi_]

Yes. Gotta jump through quite some hoops.

With CPU pot + GPU pot + DMM + Thermometers + Dewar tank (if you need to get one) + Ln2 costs.

It will be around $1000 or more before you get to do an LN2 run. This is assuming you buy high end pots & doesn't include other insulation stuff or actual hardware you use or kill due to moisture or something. It's gonna be pricey. Take your time.

I'm gonna be looking into pots pretty soon.  But all the costs are gonna be so worth it in the end.

[Br3tt96]

No one was interested in a 5ghz stable 1.335v 4790k... Kinda made me depressed and I had it at $500

[Raudi_]

No one was interested in a 5ghz stable 1.335v 4790k... Kinda made me depressed and I had it at $500

Keep pushing for it, someone will bite for it.

[rtsurfer]

I'm gonna be looking into pots pretty soon. But all the costs are gonna be so worth it in the end.

Yes it will be worth it.

If money is not a question, der8auer pots are the best.

2nd choice is Kingpin.

No one was interested in a 5ghz stable 1.335v 4790k... Kinda made me depressed and I had it at $500

Hmnnn.

Stable during what.?

Deluded & also what cooling.?