Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Jumper118]

@Jumper118 I changed VL6 to 1.475 and turned vring down a bit, now it's doing 4.38 cache.. ._.

 

just got a 1825 XTU score, going to see if I can fine tune for more.

 

I also left VL3 and VL4 alone, maybe that's the reason for stability all the sudden.

 

Also dem timings are nuts, will try 1T later.

 

 

good

 

You can ask @Jumper118 to make one.

i probably wouldn't have the time to update it and its only really for newer intel chips, so i don't find xtu very interesting. 

 

@Jumper118 do you know what's wrong?

 

I keep getting invalid result.  I'll PM you so I stop spamming this thread.

 

 

no idea. i have never benched gpu pi before

[Lays]

good

 

i probably wouldn't have the time to update it and its only really for newer intel chips, so i don't find xtu very interesting. 

 

no idea. i have never benched gpu pi before

I asked on hwbot hopefully someone can help.

Also I'm #5 in rookie league once my points update! If I can fix gpupi for cpu I'll be close to fourth. And I may also win the rookie rumble.

[-CLASSIFIED-]

Wait who got banned for ice water bathing an aio ? Why would someone get banned for that 0.o

[Lays]

Wait who got banned for ice water bathing an aio ? Why would someone get banned for that 0.o

 

He was lying about submissions, saying he was under custom loop and changing every submission and stuff like that on HWBOT.

 

For instance, one benchmark he'd say he was on custom water with an H220x + 280mm rad, even though he had a kraken x61, then the next benchmark he'd say he had an h240x and a 360mm  rad, etc.

[-CLASSIFIED-]

He was lying about submissions, saying he was under custom loop and changing every submission and stuff like that on HWBOT.

 

For instance, one benchmark he'd say he was on custom water with an H220x + 280mm rad, even though he had a kraken x61, then the next benchmark he'd say he had an h240x and a 360mm  rad, etc.

ohhhh , in a way it is a "custom" cooling solution , but I see why one may get banned for that lol. I've had a couple results removed before from jealous ppl saying I was cheating tho , like wtf.

[Raudi_]

ohhhh , in a way it is a "custom" cooling solution , but I see why one may get banned for that lol. I've had a couple results removed before from jealous ppl saying I was cheating tho , like wtf.

That wasn't the case though he was only using a x61 which is still an AIO weather its sitting in water or LN2 its still an AIO.

[-CLASSIFIED-]

That wasn't the case though he was only using a x61 which is still an AIO weather its sitting in water or LN2 its still an AIO.

I see . -mental note to self , don't do that-

[Jumper118]

I asked on hwbot hopefully someone can help.

Also I'm #5 in rookie league once my points update! If I can fix gpupi for cpu I'll be close to fourth. And I may also win the rookie rumble.

you have way more point than me even. thats because you are benching newer, more popular hardware. top 5 in rookies is really really good.

[-CLASSIFIED-]

How the heck am I 102nd in the rookie league , and 42nd in Canada!? I feel like I should be way lower ... By lower I mean higher ? Like more like 200th or something like that I just confused myself

[Jumper118]

How the heck am I 102nd in the rookie league , and 42nd in Canada!? I feel like I should be way lower ... By lower I mean higher ? Like more like 200th or something like that I just confused myself

whats your name on hwbot?

[-CLASSIFIED-]

whats your name on hwbot?

Griffin505

[Lays]

you have way more point than me even. thats because you are benching newer, more popular hardware. top 5 in rookies is really really good.

 

Aw nvm I'm #6, tonight I'm going to re-do some GPU benchmarks when I cool my room off.

 

 

I just got 18.95k physics score on firestrike, so now I know I can go push my GPU tonight when I cool my house off, and top my old score.

[Raudi_]

thats not gone well then. 

WOOT Back in windows again! 

Time to work on them timings all over again.

[Jumper118]

Griffin505

if you do gpu pi you'll get a few more points.

 

my second fx4100 is much faster. i'll be ditching the first one and i'll use this better one on phase

[Lays]

WOOT Back in windows again! 

Time to work on them timings all over again.

 

TS buddy?

 

 

Also @Jumper118 I managed to get to 4.38 cache, with 4.75 on the cpu, but can't run cinebench without it crashing.

 

Can run every other bench though, including XTU.. ._.  Even 11.5 ran fine, got like 15.61.

[Jumper118]

TS buddy?

 

 

Also @Jumper118 I managed to get to 4.38 cache, with 4.75 on the cpu, but can't run cinebench without it crashing.

 

Can run every other bench though, including XTU.. ._.  Even 11.5 ran fine, got like 15.61.

is it an error or a bsod?

[Lays]

is it an error or a bsod?

 

 

It was just freezing cinebench, sometimes froze whole PC I think. I only tried it like twice before I went on to other benchmarks.

 

I think I may have gotten an error, IDR.

 

I don't think it BSOD'd once though.

[-CLASSIFIED-]

TS buddy?

 

 

Also @Jumper118 I managed to get to 4.38 cache, with 4.75 on the cpu, but can't run cinebench without it crashing.

 

Can run every other bench though, including XTU.. ._.  Even 11.5 ran fine, got like 15.61.

does cinebench freeze ? i have that at 4.85ghz , i wait a few seconds anf then its back to running and almost complete ... tis rather odd

[Lays]

does cinebench freeze ? i have that at 4.85ghz , i wait a few seconds anf then its back to running and almost complete ... tis rather odd

 

I may try again then, I had to task manager it to fix it.

 

How long do you wait? I think I waited like 5 seconds and nothing happened.  Once I got an error I think.

[-CLASSIFIED-]

I may try again then, I had to task manager it to fix it.

 

How long do you wait? I think I waited like 5 seconds and nothing happened.  Once I got an error I think.

oe tim i waited 20 or seconds , the other time i got up and left to get some food and saw it wasnt going , when i came back it was finished so idk how long that one took

[Raudi_]

TS buddy?

 

 

Also @Jumper118 I managed to get to 4.38 cache, with 4.75 on the cpu, but can't run cinebench without it crashing.

 

Can run every other bench though, including XTU.. ._.  Even 11.5 ran fine, got like 15.61.

Sure I'll hope in now.

Ayy @Jumper118 I think the flexed stick is causing some serious issues now. XMP timings at a T1 Command rate is the tightest they will go.

[Lays]

oe tim i waited 20 or seconds , the other time i got up and left to get some food and saw it wasnt going , when i came back it was finished so idk how long that one took

 

Ok I'll try that later.

[Jumper118]

It was just freezing cinebench, sometimes froze whole PC I think. I only tried it like twice before I went on to other benchmarks.

 

I think I may have gotten an error, IDR.

 

I don't think it BSOD'd once though.

thats is annoying. sometimes if you just shut the pc and leave it for a few mins then boot in at the same settings and it might pull through.

[Lays]

thats is annoying. sometimes if you just shut the pc and leave it for a few mins then boot in at the same settings and it might pull through.

 

OK I'll try it later again, with the speeds I was at I should be able to hit 1450-1475 now.

 

I actually booted and validated near 4.9 ghz, I think it was like 4886 or something.  I started an XTU but it crashed about instantly lol.  If I had a custom loop or a better way of cooling it, I'm sure it'd do 4.9 in XTU no big deal.

[arnavvr]

@Lays @Jumper118 Is intel XTU only for haswell chips. Because I might make one if I can Run it with my 3960X/3930K