I just fininhed my all aircooled dual system in one case and one PSU powered system.

[Intelfreak]

I just fininshed my new build that has been some time under way. It´s two systems in 1 case powered by one PSU as well.

 

System spec is Mini-ITX and ATX system respectacly:

CPU: Ryzen 5 5600X and Ryzen 9 5950X

Cooling: Noctua NH-L9x65 SE-AM4a and NH-D15 chromax.black with IPPC Industrial 3000 RPM 120/140 MM fans.

Motherboard: ASUS ROG STRIX B550-I GAMING and ASUS ROG Crosshair VIII Dark Hero X570

Ram: G.SKILL TRIDENT Z ROYAL GOLD/SILVER 32 GB (2 x 16 GB and 4 x 8 GB) 3600 MHz CL14-15-15-35 1.45 volt

GPU: ASUS GTX 1650 Low Profile cooler and EVGA RTX 3080 FTW 3 ULTRA GAMING

Storage: 2 x Samsung 980 PRO 1 TB and a 2 TB + CRUCIAL MX300 2 TB SATA SSD + WD RED 4 TB and a WD GOLD 14 TB HDD

PSU: Phanteks Revolt X 1200W

Case: Phanteks Enthoo 719 black

monitors: Asus 27" TUF VG27AQL1A and a Dell 24" (last one is tempoary.

Mouse: Logitech G903 Lightspeed

Keyboard: Logitech G910 Orion Spectrum

sound: Logitech Z906

OS: Windows 10 PRO 64 bits on bofh machines (maybe later switch to win 11, but will until most bugs are corrected)

 

I began this build over a yeah ago by getting parts home and then start building. But microchip shortage, corona and overpriced hardware made it a much more difficult process than i would like it to be.

So here are a few fotos of it. Sorry they are not so good all of them. My camera sucks, sorry.

 

 

So this is my new setup to take over from my old X58 system.

[jaslion]

Sweet rig dude like the concept of just doing it with simple means.

 

Whats that one diffused led strip? I've not seen those before.

 

Also what does the little one do? Is it a plex server or something?

[Intelfreak]

3 hours ago, jaslion said:

Sweet rig dude like the concept of just doing it with simple means.

 

Whats that one diffused led strip? I've not seen those before.

 

Also what does the little one do? Is it a plex server or something?

Yeah I desided to go different and avoid water cooling and sticking to air. To see if it was even possible to do so. With the right components, is was possible.

 

I'm not sure what you mean by led strip. But if you mean the RGB strip from top to bottom of the atx system, it's Phanteks own RGB strip. Do you mean the less bright strip going between the atx and the mini-atx system. It's a integrated strip that comes with the phanteks case pre-installed. 

 

The little system is used for a more power efficient system and else works as a backup solution, retro gamer, gamer for when friends comes by, I use it as well when the atx working hard and I can't use that among other things. 

[XGoodGuyFitz]

How did you find those fans?? I cant find them with RGB and they look awesome! Could you link them for me? 

[Intelfreak]

14 minutes ago, XGoodGuyFitz said:

How did you find those fans?? I cant find them with RGB and they look awesome! Could you link them for me? 

Well it's difficult as I think we don't live in the same country to link to them. I got my fans over half a year ago. Back in June this year. 

 

But I just checked the store in my country where I got them and they have plenty in store. So it shut not be because of shortage. 

 

Amazone have the fans it seems. 

https://www.amazon.com/Lian-Li-SL120-Pack-Black/dp/B08HD75K4X

[XGoodGuyFitz]

4 minutes ago, Intelfreak said:

Well it's difficult as I think we don't live in the same country to link to them. I got my fans over half a year ago. Back in June this year. 

 

But I just checked the store in my country where I got them and they have plenty in store. So it shut not be because of shortage. 

 

Amazone have the fans it seems. 

https://www.amazon.com/Lian-Li-SL120-Pack-Black/dp/B08HD75K4X

ouch so expensive but so beuatiful.

[Intelfreak]

2 minutes ago, XGoodGuyFitz said:

ouch so expensive but so beuatiful.

Yeah they are not cheap fans. 

[jaslion]

6 hours ago, Intelfreak said:

Yeah I desided to go different and avoid water cooling and sticking to air. To see if it was even possible to do so. With the right components, is was possible.

 

I'm not sure what you mean by led strip. But if you mean the RGB strip from top to bottom of the atx system, it's Phanteks own RGB strip. Do you mean the less bright strip going between the atx and the mini-atx system. It's a integrated strip that comes with the phanteks case pre-installed. 

 

The little system is used for a more power efficient system and else works as a backup solution, retro gamer, gamer for when friends comes by, I use it as well when the atx working hard and I can't use that among other things. 

I meant the strip going from the top to bottom of the atx board. The one next to the power cables. It looks pretty neat and I like that it is prediffused.

 

I do the same with a laptop. I can continue on when my desktop is too busy doing whatever :p.

[thrasher_565]

5 hours ago, jaslion said:

I meant the strip going from the top to bottom of the atx board. The one next to the power cables. It looks pretty neat and I like that it is prediffused.

 

I do the same with a laptop. I can continue on when my desktop is too busy doing whatever :p.

https://www.amazon.ca/Phanteks-Digital-RGB-Strip-Combo-PH-NELEDKT_CMBO/dp/B07XV5TT1F/ref=sr_1_12?keywords=phanteks+argb&qid=1639024074&sr=8-12

 

On 12/7/2021 at 11:34 AM, Intelfreak said:

I just fininshed my new build that has been some time under way. It´s two systems in 1 case powered by one PSU as well.

 

System spec is Mini-ITX and ATX system respectacly:

CPU: Ryzen 5 5600X and Ryzen 9 5950X

Cooling: Noctua NH-L9x65 SE-AM4a and NH-D15 chromax.black with IPPC Industrial 3000 RPM 120/140 MM fans.

Motherboard: ASUS ROG STRIX B550-I GAMING and ASUS ROG Crosshair VIII Dark Hero X570

Ram: G.SKILL TRIDENT Z ROYAL GOLD/SILVER 32 GB (2 x 16 GB and 4 x 8 GB) 3600 MHz CL14-15-15-35 1.45 volt

GPU: ASUS GTX 1650 Low Profile cooler and EVGA RTX 3080 FTW 3 ULTRA GAMING

Storage: 2 x Samsung 980 PRO 1 TB and a 2 TB + CRUCIAL MX300 2 TB SATA SSD + WD RED 4 TB and a WD GOLD 14 TB HDD

PSU: Phanteks Revolt X 1200W

Case: Phanteks Enthoo 719 black

monitors: Asus 27" TUF VG27AQL1A and a Dell 24" (last one is tempoary.

Mouse: Logitech G903 Lightspeed

Keyboard: Logitech G910 Orion Spectrum

sound: Logitech Z906

OS: Windows 10 PRO 64 bits on bofh machines (maybe later switch to win 11, but will until most bugs are corrected)

 

I began this build over a yeah ago by getting parts home and then start building. But microchip shortage, corona and overpriced hardware made it a much more difficult process than i would like it to be.

So here are a few fotos of it. Sorry they are not so good all of them. My camera sucks, sorry.

 

 

So this is my new setup to take over from my old X58 system.

looks good but that's the pci thing that has 2 sata and 1 molex?

also imo i would intake from the top and side.

Edited December 9, 2021 by thrasher_565

[Intelfreak]

20 hours ago, jaslion said:

I meant the strip going from the top to bottom of the atx board. The one next to the power cables. It looks pretty neat and I like that it is prediffused.

 

I do the same with a laptop. I can continue on when my desktop is too busy doing whatever :p.

I can see thrasher_565 found them for me. But yeah, it´s the strips he link to i have.

 

15 hours ago, thrasher_565 said:

https://www.amazon.ca/Phanteks-Digital-RGB-Strip-Combo-PH-NELEDKT_CMBO/dp/B07XV5TT1F/ref=sr_1_12?keywords=phanteks+argb&qid=1639024074&sr=8-12

 

looks good but that's the pci thing that has 2 sata and 1 molex?

also imo i would intake from the top and side.

The PCIe thing as you call it, is just a simple sata power controller with on/off switches. That´s so i can turn those sata HDD/SSD of i dont use or need. That saves power, wear and tear on the drives and i dit because the PSU send power out to all sata cables no matter what system is on.

 

You can see the controllers on/of switches here from behind:

 

Intake from top. Nono. Top shut all ways be exhaust as hot air goes to top. The side exhaust fans are only on when the mini-atx system is on. When the atx system or bofh er on, they are turned off so they don´t ruin airflow from front intake fans. All controlled by the fan controllers.

[thrasher_565]

7 hours ago, Intelfreak said:

I can see thrasher_565 found them for me. But yeah, it´s the strips he link to i have.

 

The PCIe thing as you call it, is just a simple sata power controller with on/off switches. That´s so i can turn those sata HDD/SSD of i dont use or need. That saves power, wear and tear on the drives and i dit because the PSU send power out to all sata cables no matter what system is on.

 

You can see the controllers on/of switches here from behind:

 

Intake from top. Nono. Top shut all ways be exhaust as hot air goes to top. The side exhaust fans are only on when the mini-atx system is on. When the atx system or bofh er on, they are turned off so they don´t ruin airflow from front intake fans. All controlled by the fan controllers.

oh ok i was looking in to thows too. looking for a hotswap 5.25 bay and looking for at lest 2. but i also like the a 120mm fan blowing on them... my icydock can do it but...i only have one and want another... and there dc.... roswell has one but its $150...