Jump to content

Will going to Win 10 delete my drives?

Pumba217

Hi,

I have finally decided to upgrade to Windows 10 as I am upgrading my GPU. I have 7 currently (installed on C drive 128gb SSD) and want to know if updating will delete my data on my two other HDDs J and K drives?

Thanks

CPU: i7 4770k  Motherboard: MSI Z87-G43 SSD: ADATA 250GB PNY 120gb HDD:2xSeagate 2TB (One is an external HDD) GPU: RTX 2070 Super RAM: 16gb Corsair Vengeance 1600 PSU:Corsair CX-M600w Case: NZXT Phantom 410

Link to comment
Share on other sites

Link to post
Share on other sites

It will only delete the older OS. You may not be able to use some apps because they were designed for Windows 7 though

Link to comment
Share on other sites

Link to post
Share on other sites

during the windows install process, if you choose custom, then you can select what drives to format and which to leave alone, and where to put windows, and if you want you can also make a small partition for windows.

 

Anything i've written between the * and * is not meant to be taken seriously.

keep in mind that helping with problems is hard if you aren't specific and detailed.

i'm also not a professional, (yet) so make sure to personally verify important information as i could be wrong.

 

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, flashiling said:

during the windows install process, if you choose custom, then you can select what drives to format and which to leave alone, and where to put windows, and if you want you can also make a small partition for windows.

 

3 minutes ago, Berkomeister said:

It will only delete the older OS. You may not be able to use some apps because they were designed for Windows 7 though

Amazing. Thanks, been hesitant for a couple of years since i dont want to loose all my stuff...

CPU: i7 4770k  Motherboard: MSI Z87-G43 SSD: ADATA 250GB PNY 120gb HDD:2xSeagate 2TB (One is an external HDD) GPU: RTX 2070 Super RAM: 16gb Corsair Vengeance 1600 PSU:Corsair CX-M600w Case: NZXT Phantom 410

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Pumba217 said:

Amazing. Thanks, been hesitant for a couple of years since i dont want to loose all my stuff...

It will ask you if you want a clean start (delete everything) or if you want to keep your stuff. So beware

Link to comment
Share on other sites

Link to post
Share on other sites

It's always best to physically disconnect any separate data-only drives while installing/upgrading.

F@H
Desktop: i9-13900K, ASUS Z790-E, 64GB DDR5-6000 CL36, RTX3080, 2TB MP600 Pro XT, 2TB SX8200Pro, 2x16TB Ironwolf RAID0, Corsair HX1200, Antec Vortex 360 AIO, Thermaltake Versa H25 TG, Samsung 4K curved 49" TV, 23" secondary, Mountain Everest Max

Mobile SFF rig: i9-9900K, Noctua NH-L9i, Asrock Z390 Phantom ITX-AC, 32GB, GTX1070, 2x1TB SX8200Pro RAID0, 2x5TB 2.5" HDD RAID0, Athena 500W Flex (Noctua fan), Custom 4.7l 3D printed case

 

Asus Zenbook UM325UA, Ryzen 7 5700u, 16GB, 1TB, OLED

 

GPD Win 2

Link to comment
Share on other sites

Link to post
Share on other sites

20 minutes ago, Pumba217 said:

Hi,

I have finally decided to upgrade to Windows 10 as I am upgrading my GPU. I have 7 currently (installed on C drive 128gb SSD) and want to know if updating will delete my data on my two other HDDs J and K drives?

Thanks

Did you know that both AMD and Nvidia support Windows 7 with new GPUs?...

Anyway it's recommended to backup your drives just in case something goes wrong.

A PC Enthusiast since 2011
AMD Ryzen 7 5700X@4.65GHz | GIGABYTE GTX 1660 GAMING OC @ Core 2085MHz Memory 5000MHz
Cinebench R23: 15669cb | Unigine Superposition 1080p Extreme: 3566
Link to comment
Share on other sites

Link to post
Share on other sites

Make a backup of your files and then do a clean install. J, K and every drive apart from C will not get deleted. You should turn of the SATA ports or physically remove drives when installing Windows 10. What GPU did you get?

CPU: Ryzen 5800X3D | Motherboard: Gigabyte B550 Elite V2 | RAM: G.Skill Aegis 2x16gb 3200 @3600mhz | PSU: EVGA SuperNova 750 G3 | Monitor: LG 27GL850-B , Samsung C27HG70 | 
GPU: Red Devil RX 7900XT | Sound: Odac + Fiio E09K | Case: Fractal Design R6 TG Blackout |Storage: MP510 960gb and 860 Evo 500gb | Cooling: CPU: Noctua NH-D15 with one fan

FS in Denmark/EU:

Asus Dual GTX 1060 3GB. Used maximum 4 months total. Looks like new. Card never opened. Give me a price. 

Link to comment
Share on other sites

Link to post
Share on other sites

43 minutes ago, Kilrah said:

It's always best to physically disconnect any separate data-only drives while installing/upgrading.

Yeah, you should unplug any drive before install, make sure you don't select the wrong drive.

 

You can also opt for upgrade instead of clean install.

Backup important files before executinng.

Ryzen 5700g @ 4.4ghz all cores | Asrock B550M Steel Legend | 3060 | 2x 16gb Micron E 2666 @ 4200mhz cl16 | 500gb WD SN750 | 12 TB HDD | Deepcool Gammax 400 w/ 2 delta 4000rpm push pull | Antec Neo Eco Zen 500w

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, Vishera said:

Did you know that both AMD and Nvidia support Windows 7 with new GPUs?...

Anyway it's recommended to backup your drives just in case something goes wrong.

I actually had no idea... i assumed they would have gave up or that the there is performance difference. Ive been away from the PC gaming side of things for about 4 years and man have things changed... Got a 1440p 144hz monitor and getting a RTX 2070 super :) seems like a good combo for 1440p games a for a few years

CPU: i7 4770k  Motherboard: MSI Z87-G43 SSD: ADATA 250GB PNY 120gb HDD:2xSeagate 2TB (One is an external HDD) GPU: RTX 2070 Super RAM: 16gb Corsair Vengeance 1600 PSU:Corsair CX-M600w Case: NZXT Phantom 410

Link to comment
Share on other sites

Link to post
Share on other sites

Getting a 2070 super :)

CPU: i7 4770k  Motherboard: MSI Z87-G43 SSD: ADATA 250GB PNY 120gb HDD:2xSeagate 2TB (One is an external HDD) GPU: RTX 2070 Super RAM: 16gb Corsair Vengeance 1600 PSU:Corsair CX-M600w Case: NZXT Phantom 410

Link to comment
Share on other sites

Link to post
Share on other sites

On 9/29/2020 at 9:51 AM, Kilrah said:

It's always best to physically disconnect any separate data-only drives while installing/upgrading.

this. I wouldn't trust windows with something like that, it may just decide that's it's better for the user to get a "fresh start" regardless of what the user chose, for a plethora of reasons. ¯\_(ツ)_/¯

The direction tells you... the direction

-Scott Manley, 2021

 

Softwares used:

Corsair Link (Anime Edition) 

MSI Afterburner 

OpenRGB

Lively Wallpaper 

OBS Studio

Shutter Encoder

Avidemux

FSResizer

Audacity 

VLC

WMP

GIMP

HWiNFO64

Paint

3D Paint

GitHub Desktop 

Superposition 

Prime95

Aida64

GPUZ

CPUZ

Generic Logviewer

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

I would also recommend getting at least a 256GB SSD for Windows 10.

Workstation PC Specs: CPU - i7 8700K; MoBo - ASUS TUF Z390; RAM - 32GB Crucial; GPU - Gigabyte RTX 1660 Super; PSU - SeaSonic Focus GX 650; Storage - 500GB Samsung EVO, 3x2TB WD HDD;  Case - Fractal Designs R6; OS - Win10

Link to comment
Share on other sites

Link to post
Share on other sites

Always only have one drive connected while installing Windows. It does whatever it wants, like installing the bootloader on a seperate drive. Better safe than sorry.

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×