Jump to content

Do CPUs overclocked better if they are from a later batch

I'm planning to buy an r5 1600 which is at sale at 80$, since AMD is gearing up to launch the 3rd gen Ryzen processors, I'm assuming that this processor is from one of the last batches. Will it be able to overclocked better than the processors form the earlier batches?

And will an RTX 2060 be a good pair for this?

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Midniteb0ne said:

I'm planning to buy an r5 1600 which is at sale at 80$, since AMD is gearing up to launch the 3rd gen Ryzen processors, I'm assuming that this processor is from one of the last batches. Will it be able to overclocked better than the processors form the earlier batches?

And will an RTX 2060 be a good pair for this?

I have heard of no such thing.

If you're playing on 1080p, you definitely do not need an rtx 2060

Crimson Panda

http://pcpartpicker.com/list/g6T8QV

AKG K712 PRO

OL DAC
Magni 3

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, food158 said:

I have heard of no such thing.

If you're playing on 1080p, you definitely do not need an rtx 2060

Hmmmm. What about the 1660ti?

Link to comment
Share on other sites

Link to post
Share on other sites

nope.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!dId i WiN teH SiLiCON LotTerrYyOu ShoUlD dEsHrOuD uR GPUmy SYstEm iS UNDerPerforMiNg iN WarzONEcan mY Pc Run WiNdOwS 11 ?woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites

Link to post
Share on other sites

If the stepping (or revision) remains the same, then no. However if the stepping changes over time then yes, it might make a difference. Perhaps the best example of this was the Core 2 Quad Q6600 which started out on the B3 stepping and later went to the G0 stepping. The G0 was generally known to be a better clocking chip compared to B0.

There's a time and place for everything! But not now. - Professor Oak

i7 2600K 4.3GHz  -  GTX 1060 3GB  - ASUS P8Z68-V - 16GB DDR3-1600 CL9 - EIZO 1080p 120Hz VA

Intel Skulltrail: 2x Core 2 Quad QX9775 - Intel D5400XS - 16GB FB DDR2-800 CL5 Quad Channel

EVGA SR-2 Classified - 2x Xeon X5675 4.2GHz - 24GB DDR3-1830 C10 Triple Channel

Intel Skulltrail #2: 2x Xeon E5472  - Intel D5400XS - 16GB FB DDR2-667 CL5 Quad Channel

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

No.

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
Share on other sites

Link to post
Share on other sites

50 minutes ago, Midniteb0ne said:

Hmmmm. What about the 1660ti?

just use 1660, overclock the memory and you'll get 95% of the 1660Ti's performance for a nice discount.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

3 hours ago, Jurrunio said:

just use 1660, overclock the memory and you'll get 95% of the 1660Ti's performance for a nice discount.

I have an Rx 480 8gb rn and the 1660 is not much of an upgrade from it.

Link to comment
Share on other sites

Link to post
Share on other sites

19 minutes ago, Midniteb0ne said:

I have an Rx 480 8gb rn and the 1660 is not much of an upgrade from it.

in that sense not even the 1660Ti is good enough, stick to the 2060.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

30 minutes ago, Midniteb0ne said:

I have an Rx 480 8gb rn and the 1660 is not much of an upgrade from it.

Well if you can get a better CPU that's more upgrade than rtx 2060. Unless you play ultra settings on all games 

 

Link to comment
Share on other sites

Link to post
Share on other sites

10 hours ago, Midniteb0ne said:

I'm planning to buy an r5 1600 which is at sale at 80$, since AMD is gearing up to launch the 3rd gen Ryzen processors, I'm assuming that this processor is from one of the last batches. Will it be able to overclocked better than the processors form the earlier batches?

And will an RTX 2060 be a good pair for this?

As for silicon lottery, later batches don't really do much for cpus, but I've found that later batch ram and vram modules can have a significant difference in overclocking. A RTX 2060 will pair well with the 1600 provided that you feed the 1600 with some decent ram and overclock it, look up the various profiles that TheStilt has made for whatever ram kit you decide to get, and you'll be faster than most ryzen systems.

8086k Winner BABY!!

 

Main rig

CPU: R7 5800x3d (-25 all core CO 102 bclk)

Board: Gigabyte B550 AD UC

Cooler: Corsair H150i AIO

Ram: 32gb HP V10 RGB 3200 C14 (3733 C14) tuned subs

GPU: EVGA XC3 RTX 3080 (+120 core +950 mem 90% PL)

Case: Thermaltake H570 TG Snow Edition

PSU: Fractal ION Plus 760w Platinum  

SSD: 1tb Teamgroup MP34  2tb Mushkin Pilot-E

Monitors: 32" Samsung Odyssey G7 (1440p 240hz), Some FHD Acer 24" VA

 

GFs System

CPU: E5 1660v3 (4.3ghz 1.2v)

Mobo: Gigabyte x99 UD3P

Cooler: Corsair H100i AIO

Ram: 32gb Crucial Ballistix 3600 C16 (3000 C14)

GPU: EVGA RTX 2060 Super 

Case: Phanteks P400A Mesh

PSU: Seasonic Focus Plus Gold 650w

SSD: Kingston NV1 2tb

Monitors: 27" Viotek GFT27DB (1440p 144hz), Some 24" BENQ 1080p IPS

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

 

15 hours ago, Midniteb0ne said:

I'm planning to buy an r5 1600 which is at sale at 80$, since AMD is gearing up to launch the 3rd gen Ryzen processors, I'm assuming that this processor is from one of the last batches. Will it be able to overclocked better than the processors form the earlier batches?

And will an RTX 2060 be a good pair for this?

depends on which cpu, for zen 1 it doesnt really matter, if u have a decent mobo, ur guaranteed 3.8, for efficiency's sake the range is 3.8-4.0, they are all pretty much the same.

 

Back in the sandy/ivy bridge days the later batches were indeed better, but in coffee lake's case, the newer 8700k gets binned into 8086k so later 8700ks are worse.

5950x 1.33v 5.05 4.5 88C 195w ll R20 12k ll drp4 ll x570 dark hero ll gskill 4x8gb 3666 14-14-14-32-320-24-2T (zen trfc)  1.45v 45C 1.15v soc ll 6950xt gaming x trio 325w 60C ll samsung 970 500gb nvme os ll sandisk 4tb ssd ll 6x nf12/14 ippc fans ll tt gt10 case ll evga g2 1300w ll w10 pro ll 34GN850B ll AW3423DW

 

9900k 1.36v 5.1avx 4.9ring 85C 195w (daily) 1.02v 4.3ghz 80w 50C R20 temps score=5500 ll D15 ll Z390 taichi ult 1.60 bios ll gskill 4x8gb 14-14-14-30-280-20 ddr3666bdie 1.45v 45C 1.22sa/1.18 io  ll EVGA 30 non90 tie ftw3 1920//10000 0.85v 300w 71C ll  6x nf14 ippc 2000rpm ll 500gb nvme 970 evo ll l sandisk 4tb sata ssd +4tb exssd backup ll 2x 500gb samsung 970 evo raid 0 llCorsair graphite 780T ll EVGA P2 1200w ll w10p ll NEC PA241w ll pa32ucg-k

 

prebuilt 5800 stock ll 2x8gb ddr4 cl17 3466 ll oem 3080 0.85v 1890//10000 290w 74C ll 27gl850b ll pa272w ll w11

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×