Jump to content

Successful installation of my I7-7700 and aftermarket cooler

Theminecraftaddict555
By Theminecraftaddict555
in Build Logs
 Share
Posted

Was able to get my i7-7700 cpu installed along with my deepcool gammaxx 400 after market cpu cooler. CPU installation was ez but the aftermarket cooler on the other hand, eh. The aftermarket cooler was easy to assemble with the intel cpu cooler set that it came with (2x2 intel cooler push pins) but the installation on the mobo was a pain. After lining up the push-pin along with the motherboard cpu cooler holes, it became very difficult to push pin down. This was due to the fact that the last push pin was being blocked by the cooler's huge fan. So I had to wiggle my fingers in there for to push it down and look at the back of my motherboard to see if it successfully pushed down (for about half an hour). 

 

So far, my cpu runs games better than before and cooler with my aftermarket cooler. However, the fans do get loud at times esp. playing on vsync off on arma 3. 

 

 

20181027_115131[1].jpg

20181027_115156[1].jpg

20181027_115212[1].jpg

Don't call me a nerd, it makes me look slightly smarter than you

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

congrats bro!

And yeah depending on the mounting mechanism Cooler isntalation is always a pain in the B.

FOLDING MONTH 2021! GOGOGO and save on some heating costs 🙂

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Looking good! Yeah, some coolers have the terrible mounting hardware (Be Quiet comes to mind). Cryorig and Cooler Master coolers are some of the easiest air coolers to mount.

AMD Motherboard Tier List ‖ GPU Cooling Tier List ‖ PSU Tier List ‖ A Dive Into Custom Keyboards & Mechanical Switches

NEWCOMERS Remember to ' Reply ' to comments in order for people to see them, this is done by clicking the arrow icon at the bottom of a comment (Quote).

My Builds:

MEGA Desk Build

 

Blueberry Pi ‖ R9 3950X ‖ Asus X470 ROG Crosshair VII Hero Wi-Fi ATX ‖ Corsair Vengeance RGB Pro 4x16GB 3200MHz CL16 ‖ EVGA GTX 1080Ti SC Black Edition 11GB ‖ EVGA P2 850W w/ Blue Sleeved Cables ‖ Cryorig R1 Universal (Blue) ‖ 2x Corsair Force MP510 4TB w/ Asus Hyper m.2 V2 ‖ Corsair ML Pro Blue LED Fans ‖ Fractal Design Meshify C TG ATX Mid Tower ‖ 

Asus ROG SWIFT PG348Q 100Hz IPS G-Sync UW ‖ Dell UltraSharp U3419W 60Hz IPS UW ‖ Custom TOFU96 ‖ Corsair Scimitar Pro RGB 

 

Work Rig ‖ ThreadRipper 3970X ‖ Asus Prime TRX40 Pro ATX ‖ G.Skill RipjawsV 8x32GB 3200Mhz CL16 ‖ Nvidia Quadro RTX 6000 24GB ‖ Corsair HXi 1000W ‖ EVGA CLC 360 AIO ‖ 8x Sabrent Rocket 2TB w/ 2x Asus Hyper m.2 V2  ‖ Arctic P12 Fans ‖ Phanteks P400A ATX Mid Tower 

 

Plotting Machine 1 ‖ ThreadRipper 2990WX ‖ AsRock X399 Taichi ATX ‖ Kingston HyperX Fury 8x16GB 2666Mhz CL18  ‖ Nvidia Quadro K600 1GB ‖ Corsair RMx 850W ‖ EVGA CLC 360 AIO ‖ 2x Sabrent Rocket 2TB & 2x Sabrent Rocket 4TB w/ Asus Hyper m.2 V2 ‖ Arctic P12 Fans ‖ Rosewill RSV-L4500 4U ‖ 5x Dell DS60 60-bay JBOD w/ 1.2PB of HDD Storage ‖ HP 22U Half Rack

 

Plotting Machine 2 ‖ R9 3950X ‖ Asus TUF X570-Plus Wi-Fi ATX ‖ G.Skill RipjawsV 4x16GB 3200Mhz CL16  ‖ Nvidia Quadro K600 1GB ‖ Corsair RM 650W ‖ Noctua NH-D15s Chormax ‖ 4x Corsair MP600 Force 1TB W/ Asus Hyper m.2 Gen4 ‖ Arctic P14 & P12 Fans ‖ Silverstone FARA R1 ATX Mid Tower

 

J.A.R.V.I.S. ‖ R9 3900XT ‖ Asus B550-I ROG STRIX Wi-Fi ITX ‖ G.Skill Ripjaws V 2x16GB 3600MHz CL16 ‖ EVGA GTX 1080 SC2 iCX 8GB ‖ Corsair SF 750W Platinum ‖ Corsair H100i Pro AIO ‖ Noctua NF-A12x15 Chromax Fans ‖ FormD T1 SFF ITX Case ‖ 

LG 75UM8070PUA 4K UHD 120Hz IPS HDR TV ‖ Corsair K63 Cherry MX Red Special Edition Wireless ‖ Corsair Ironclaw RGB Wireless

 

Archive Server ‖ R3 2200G ‖ Asus B450-I ROG STRIX Wi-Fi ITX ‖ Corsair Vengeance RGB Pro 2x8GB 3200MHz CL16 White ‖ Vega Integrated Graphics ‖ EVGA P2 750W ‖ Prism Wraith Cooler ‖ ITX Open Bench ‖ 2x HP SAS Expander ‖ LSI-SAS9211 ‖ 220TB of HDD Storage

 

SFF ITX Home PC ‖ i5-7500 ‖ MSI B250I Gaming Pro Wi-Fi AC ITX ‖ G.Skill Ripjaws V 2x8GB 2800MHz ‖ Intel Integrated Graphics ‖ Seasonic SSP Flex ATX 300W PSU ‖ Cryorig C7 ‖ Velka 3 rev 1.2 SFF ITX Case (Grey)  

 

Laptop ‖ Dell XPS13 2-in-1 7390 (2020) ‖ i7-1065G7 ‖ 32GB 3733MHz LPDDR4x ‖ Intel Integrated Graphics ‖ 1TB NVME M.2 ‖ UHD+ (3840 x 2400) InfinityEdge Touch Display 

 

Keyboard Collection ‖ GMMK Full Size ‖ TOFU96 90%  ‖ KBD8x MKII TKL ‖ Drop CTRL High Profile TKL ‖ KBD Bella 75% ‖ GMMK Pro 75% ‖ XD84 Pro 75% ‖ KBD67 V2 MKII 65% ‖ KBD67Lite 65% ‖ TOFU65 65% ‖ KBD Blade 60% ‖ Drop Carina 60% ‖ Southpaw75 60% w/ Left Numpad ‖ OLKB Preonic V3 Ortholinear ‖ CosPad XD24  ‖ KBDPad MKII

 

Key Cap Collection ‖ GMK Boba Fett ‖ GMK Red Samurai ‖ GMK Laser CyberDeck +Novalties ‖ GMK Arch ‖ MaxKey B&W ‖ Drop MT3 Camillo ‖ Matt3o MT3 /dev/tty ‖ KBDfans Biip Torii Ext-2048 ‖ ePBT Less But Better +Novalties ‖ EnjoyPBT Dolch ‖ WinMix Mustard ‖ Drop Skylight Horizon & Slate ‖ Glorious Black Aura ‖  

 

Mechanical Key Switch Collection ‖ Zealios V2 65g ‖ Zealios V2 78g ‖ Zilents V2 67g ‖ Tealios V2 67g ‖ C³ Kiwi ‖ C³ Tangerine ‖ Invyr Holy Panda ‖ Durock T1 67g ‖ Kailh Box Thick Jades ‖ Kailh Box Royal ‖ Kailh Box Heavy Dark Yellow ‖ Kailh Box Heavy Burnt Orange ‖ Kailh Box White ‖ Kailh Box Red ‖ Kailh Pro Purple ‖ Kailh Pro Burgandy ‖ Gateron Ink Black V2 ‖ Gateron Black ‖ Gateron Yellow ‖ Gateron Brown ‖ Gateron Green ‖ Gateron Blue ‖ Cherry MX Black ‖ Cherry MX Brown ‖ Cherry MX Red

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

For future reference, you can clip on the fan after the heatsink is installed.

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, JM21 said:

Looking good! Yeah, some coolers have the terrible mounting hardware (Be Quiet comes to mind). Cryorig and Cooler Master coolers are some of the easiest air coolers to mount.

I fkn sliced my fingers open when I did try to install my Dark Rock 3...

Then I bought a Noctua and was blow away by how simple it can be

 

Ok and now I am on custom water

FOLDING MONTH 2021! GOGOGO and save on some heating costs 🙂

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Metallus97 said:

I fkn sliced my fingers open when I did try to install my Dark Rock 3...

Then I bought a Noctua and was blow away by how simple it can be

 

Ok and now I am on custom water

Hahahaha I used to have the DRP3 as well. I COULD NOT for the life of me get it on, had to get my girlfriend to do it and her small nimble hands barely did the job. I sold it and replaced it with the Cryorig R1 which should win some kind of award for ease of installation considering it's a massive air cooler. I've never owned a Noctua cooler but I've heard good things (they are just so ugly).

AMD Motherboard Tier List ‖ GPU Cooling Tier List ‖ PSU Tier List ‖ A Dive Into Custom Keyboards & Mechanical Switches

NEWCOMERS Remember to ' Reply ' to comments in order for people to see them, this is done by clicking the arrow icon at the bottom of a comment (Quote).

My Builds:

MEGA Desk Build

 

Blueberry Pi ‖ R9 3950X ‖ Asus X470 ROG Crosshair VII Hero Wi-Fi ATX ‖ Corsair Vengeance RGB Pro 4x16GB 3200MHz CL16 ‖ EVGA GTX 1080Ti SC Black Edition 11GB ‖ EVGA P2 850W w/ Blue Sleeved Cables ‖ Cryorig R1 Universal (Blue) ‖ 2x Corsair Force MP510 4TB w/ Asus Hyper m.2 V2 ‖ Corsair ML Pro Blue LED Fans ‖ Fractal Design Meshify C TG ATX Mid Tower ‖ 

Asus ROG SWIFT PG348Q 100Hz IPS G-Sync UW ‖ Dell UltraSharp U3419W 60Hz IPS UW ‖ Custom TOFU96 ‖ Corsair Scimitar Pro RGB 

 

Work Rig ‖ ThreadRipper 3970X ‖ Asus Prime TRX40 Pro ATX ‖ G.Skill RipjawsV 8x32GB 3200Mhz CL16 ‖ Nvidia Quadro RTX 6000 24GB ‖ Corsair HXi 1000W ‖ EVGA CLC 360 AIO ‖ 8x Sabrent Rocket 2TB w/ 2x Asus Hyper m.2 V2  ‖ Arctic P12 Fans ‖ Phanteks P400A ATX Mid Tower 

 

Plotting Machine 1 ‖ ThreadRipper 2990WX ‖ AsRock X399 Taichi ATX ‖ Kingston HyperX Fury 8x16GB 2666Mhz CL18  ‖ Nvidia Quadro K600 1GB ‖ Corsair RMx 850W ‖ EVGA CLC 360 AIO ‖ 2x Sabrent Rocket 2TB & 2x Sabrent Rocket 4TB w/ Asus Hyper m.2 V2 ‖ Arctic P12 Fans ‖ Rosewill RSV-L4500 4U ‖ 5x Dell DS60 60-bay JBOD w/ 1.2PB of HDD Storage ‖ HP 22U Half Rack

 

Plotting Machine 2 ‖ R9 3950X ‖ Asus TUF X570-Plus Wi-Fi ATX ‖ G.Skill RipjawsV 4x16GB 3200Mhz CL16  ‖ Nvidia Quadro K600 1GB ‖ Corsair RM 650W ‖ Noctua NH-D15s Chormax ‖ 4x Corsair MP600 Force 1TB W/ Asus Hyper m.2 Gen4 ‖ Arctic P14 & P12 Fans ‖ Silverstone FARA R1 ATX Mid Tower

 

J.A.R.V.I.S. ‖ R9 3900XT ‖ Asus B550-I ROG STRIX Wi-Fi ITX ‖ G.Skill Ripjaws V 2x16GB 3600MHz CL16 ‖ EVGA GTX 1080 SC2 iCX 8GB ‖ Corsair SF 750W Platinum ‖ Corsair H100i Pro AIO ‖ Noctua NF-A12x15 Chromax Fans ‖ FormD T1 SFF ITX Case ‖ 

LG 75UM8070PUA 4K UHD 120Hz IPS HDR TV ‖ Corsair K63 Cherry MX Red Special Edition Wireless ‖ Corsair Ironclaw RGB Wireless

 

Archive Server ‖ R3 2200G ‖ Asus B450-I ROG STRIX Wi-Fi ITX ‖ Corsair Vengeance RGB Pro 2x8GB 3200MHz CL16 White ‖ Vega Integrated Graphics ‖ EVGA P2 750W ‖ Prism Wraith Cooler ‖ ITX Open Bench ‖ 2x HP SAS Expander ‖ LSI-SAS9211 ‖ 220TB of HDD Storage

 

SFF ITX Home PC ‖ i5-7500 ‖ MSI B250I Gaming Pro Wi-Fi AC ITX ‖ G.Skill Ripjaws V 2x8GB 2800MHz ‖ Intel Integrated Graphics ‖ Seasonic SSP Flex ATX 300W PSU ‖ Cryorig C7 ‖ Velka 3 rev 1.2 SFF ITX Case (Grey)  

 

Laptop ‖ Dell XPS13 2-in-1 7390 (2020) ‖ i7-1065G7 ‖ 32GB 3733MHz LPDDR4x ‖ Intel Integrated Graphics ‖ 1TB NVME M.2 ‖ UHD+ (3840 x 2400) InfinityEdge Touch Display 

 

Keyboard Collection ‖ GMMK Full Size ‖ TOFU96 90%  ‖ KBD8x MKII TKL ‖ Drop CTRL High Profile TKL ‖ KBD Bella 75% ‖ GMMK Pro 75% ‖ XD84 Pro 75% ‖ KBD67 V2 MKII 65% ‖ KBD67Lite 65% ‖ TOFU65 65% ‖ KBD Blade 60% ‖ Drop Carina 60% ‖ Southpaw75 60% w/ Left Numpad ‖ OLKB Preonic V3 Ortholinear ‖ CosPad XD24  ‖ KBDPad MKII

 

Key Cap Collection ‖ GMK Boba Fett ‖ GMK Red Samurai ‖ GMK Laser CyberDeck +Novalties ‖ GMK Arch ‖ MaxKey B&W ‖ Drop MT3 Camillo ‖ Matt3o MT3 /dev/tty ‖ KBDfans Biip Torii Ext-2048 ‖ ePBT Less But Better +Novalties ‖ EnjoyPBT Dolch ‖ WinMix Mustard ‖ Drop Skylight Horizon & Slate ‖ Glorious Black Aura ‖  

 

Mechanical Key Switch Collection ‖ Zealios V2 65g ‖ Zealios V2 78g ‖ Zilents V2 67g ‖ Tealios V2 67g ‖ C³ Kiwi ‖ C³ Tangerine ‖ Invyr Holy Panda ‖ Durock T1 67g ‖ Kailh Box Thick Jades ‖ Kailh Box Royal ‖ Kailh Box Heavy Dark Yellow ‖ Kailh Box Heavy Burnt Orange ‖ Kailh Box White ‖ Kailh Box Red ‖ Kailh Pro Purple ‖ Kailh Pro Burgandy ‖ Gateron Ink Black V2 ‖ Gateron Black ‖ Gateron Yellow ‖ Gateron Brown ‖ Gateron Green ‖ Gateron Blue ‖ Cherry MX Black ‖ Cherry MX Brown ‖ Cherry MX Red

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
6 minutes ago, WoodenMarker said:

For future reference, you can clip on the fan after the heatsink is installed.

What do you mean by that? 

Don't call me a nerd, it makes me look slightly smarter than you

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Theminecraftaddict555 said:

What do you mean by that? 

You can install the heatsink with the fan detached so it's not in the way of the push pins and clip the fan on afterwards.

Like this:

 

If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/
Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Build Logs

×