Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***

[DildorTheDecent]

Yeah, the R9 280 bench I did for valley the same card was my buddies old one before he got his 970 and it wouldn't overclock at all on his system and then put it in mine and got some seriously fast clocks out of it.

nice. i have a frind who has a GTX 770 ACX. Reference PCB just with that cooler on it. It has a G10 and a H-whatever (idk) on it. even though it does 40-55C tops he doesn't want to try and push it. 

 

While a friend has the same card except with a JetStream cooler and he got about 1250MHz+ core. with my help  custom PCBs help.

[Raudi_]

nice. i have a frind who has a GTX 770 ACX. Reference PCB just with that cooler on it. It has a G10 and a H-whatever (idk) on it. even though it does 40-55C tops he doesn't want to try and push it. 

 

While a friend has the same card except with a JetStream cooler and he got about 1250MHz+ core. with my help  custom PCBs help.

I've only had reference for Nvidia GPU's so far. AMD has always been custom though.

[Raudi_]

Man Screw the fuck out of these new drivers for Kepler I lost 40MHz on my cards, going back to 337 drivers and I'm gonna see if I can get my 1410MHz Core bench speeds back again.

[Raudi_]

100% Stock GPU speeds and only with my CPU at 4.7GHz on the 335 Driver. Goes to show how boned the 700 series has been with the latest drivers.

GPU Cores boosted to 1188.9MHz which is stock and VRAM is at stock speeds. 



 

[mrmonmon2]

that'll do

well he could also hit save for the vally bench and it gives you an html link file

 

Man Screw the fuck out of these new drivers for Kepler I lost 40MHz on my cards, going back to 337 drivers and I'm gonna see if I can get my 1410MHz Core bench speeds back again.

so thats why vally kept going dark and stopped responding with my gpu only at 1209, which was running on the absolute max clock for 1.2 volts before

[Raudi_]

well he could also hit save for the vally bench and it gives you an html link file

 

so thats why vally kept going dark and stopped responding with my gpu only at 1209, which was running on the absolute max clock for 1.2 volts before

Go to 335 drivers trust me, Look at my post above. its almost 500 points better at stock speeds with 335 then the latest.

[mrmonmon2]

KingCry, on 12 Feb 2015 - 12:50 PM, said:

Go to 335 drivers trust me, Look at my post above. its almost 500 points better at stock speeds with 335 then the latest.

yeah I think ill go to either those or the last update that benifitted the 7 series (the dsr update I think)

[Raudi_]

yeah I think ill go to either those or the last update that benifitted the 7 series (the dsr update I think)

335 is the only driver you should use

I just scored 4300 points at the same speeds as the driver test for latest drivers. That should tell you something.

[mrmonmon2]

KingCry, on 12 Feb 2015 - 1:00 PM, said:KingCry, on 12 Feb 2015 - 1:00 PM, said:KingCry, on 12 Feb 2015 - 1:00 PM, said:KingCry, on 12 Feb 2015 - 1:00 PM, said:

335 is the only driver you should use

I just scored 4300 points at the same speeds as the driver test for latest drivers. That should tell you something.

fuck it I think im going to archive all the drivers from 7 series support.

wont ever have to download another driver for it until they do something good for it

 

edit, making my own archive meow, only another hour(slow downloads from Nvidia site)

 

oldest driver is 337 on the NVidia support page.

I do however have an install for the 331.58 driver.

[Raudi_]

fuck it I think im going to archive all the drivers from 7 series support.

wont ever have to download another driver for it until they do something good for it

 

oldest driver is 337 on the NVidia support page.

I do however have an install for the 331.58 driver.

http://www.nvidia.com/download/driverResults.aspx/73780/en-us

[mrmonmon2]

KingCry, on 12 Feb 2015 - 1:18 PM, said:

http://www.nvidia.com/download/driverResults.aspx/73780/en-us

thanks!

[Raudi_]

New SLI Scores for Basic and Extreme HD will be doing Single card in about 15-20mins.

[KeltonDSMer]

Figured I would re-run Valley with 14.12, and was able to bump the memory a bit and get a couple more FPS. My last scores were with the 8320 at 4.5, but I find it makes very little difference in Valley (like within the margin of error) so I left it on my 24/7 profile.

 

CPU: 8320 (undervolted at 4.0ghz)

GPU: R9 270 (1090core/1505mem)

FPS: 35.5

Score: 1486

Setting: Extreme HD preset

 

 

Same settings for Basic preset:

FPS: 71.9

Score: 3009

 

 

I sure wish voltage wasn't locked on this thing; I have a lot of thermal headroom and wish I wasn't limited to 1.2V

 

Thanks for keeping things updated @Jumper118 , it makes it a lot of fun for me

 

Edit: I hope the Extreme HD screenshot is okay. I couldn't figure out how to show GPUz without taking a screenshot of the Valley score, opening it in a photo viewer, and then dragging the GPUz and notepad windows in front.

[Raudi_]

Figured I would re-run Valley with 14.12, and was able to bump the memory a bit and get a couple more FPS. My last scores were with the 8320 at 4.5, but I find it makes very little difference in Valley (like within the margin of error) so I left it on my 24/7 profile.

 

CPU: 8320 (undervolted at 4.0ghz)

GPU: R9 270 (1090core/1505mem)

FPS: 35.5

Score: 1486

Setting: Extreme HD preset

 

-snip-

 

Same settings for Basic preset:

FPS: 71.9

Score: 3009

 

-snip-

 

I sure wish voltage wasn't locked on this thing; I have a lot of thermal headroom and wish I wasn't limited to 1.2V

 

Thanks for keeping things updated @Jumper118 , it makes it a lot of fun for me

 

Edit: I hope the Extreme HD screenshot is okay. I couldn't figure out how to show GPUz without taking a screenshot of the Valley score, opening it in a photo viewer, and then dragging the GPUz and notepad windows in front.

Get the card Cooler and I can garentee you can get the core higher, its mostly fault of the VRMs running hot.

[KeltonDSMer]

Get the card Cooler and I can garentee you can get the core higher, its mostly fault of the VRMs running hot.

 

I appreciate the tips! I am not so sure the power delivery is getting very hot though, the core maxed at 63C while running the extreme Valley preset and the open air cooler blows lots of fresh air at the entire PCB. I even have a 120mm bottom mounted intake blowing directly at the card. What software do you use to monitor VRM temps? I looked at AMD overdrive, HWmoitor, HWinfo64, AI Suite II, and GPUz and didn't see anything (but could have missed it)

 

I might take her outside if it is cold and I am bored some night!

[Raudi_]

I appreciate the tips! I am not so sure the power delivery is getting very hot though, the core maxed at 63C while running the extreme Valley preset and the open air cooler blows lots of fresh air at the entire PCB. I even have a 120mm bottom mounted intake blowing directly at the card. What software do you use to monitor VRM temps? I looked at AMD overdrive, HWmoitor, HWinfo64, AI Suite II, and GPUz and didn't see anything (but could have missed it)

 

I might take her outside if it is cold and I am bored some night!

The VRMs always get super hot there is no sure fire way to monitor them unless there is a sensor for them on the card. I know on the R9 280 I benched the VRMs were to hot to touch from the back of PCB on the card even at stock speeds. I brought the temps down and it helped even with the memory got it to 1250MHz core and 1850MHz memory. Which is much higher then the average overclocks for the 280's.

[Raudi_]

Beat my previous Basic Single card score gonna mess with single card Extreme HD some other time. 

[Jumper118]

will update in the morning. been playing with my new 2600K 

[Coeleborn]

Intel Core 2 Duo, 3Ghz; 8GB Corsair XMS DDR3; EVGA GeForce GTX 750 Ti FTW, overclocked to 1463MHz

[Jumper118]

Intel Core 2 Duo, 3Ghz; 8GB Corsair XMS DDR3; EVGA GeForce GTX 750 Ti FTW, overclocked to 1463MHz

they are the wrong setting to get on the spreadsheet. you will need to run the extreme hd preset and basic preset.

[Coeleborn]

they are the wrong setting to get on the spreadsheet. you will need to run the extreme hd preset and basic preset.

Bear with me; I'm brand new to video cards ---just see my posts in here, lol!: http://linustechtips.com/main/topic/304943-pci-e-20-vs-30/#entry4207541

 

[DirtySHISNO]

Managed to beat my previous score just enough that all the 970s are below me.

 

CPU; i5-3570k @4.5GHz
GPU ; Gigabyte windforce GTX 780 3xOC rev.2 (stock bios, air)
Average FPS; 75
Score; 3138
Setting; Extreme HD

+110 core boosting to 1228 according to afterburner (but not gpuz)

+500 mem according to afterburner. 1752 in GPUZ x4 = 7008.  7GHz effective

 

[SteveGrabowski]

 

CPU: Xeon E3-1231v3 @ 3.4 GHz base clock

GPU: EVGA GTX 970 SC ACX 2.0 @ 1265 MHz core, 1828 MHz memory

FPS: 59.7

Score: 2498

Setting: Extreme HD

 

 

How do you get screenshots while Valley is running? When I hit "Print Screen" and paste into mspaint I get nothing but black, so I did a screenshot of my results page instead.

[Raudi_]

-snip-

 

CPU: Xeon E3-1231v3 @ 3.4 GHz base clock

GPU: EVGA GTX 970 SC ACX 2.0 @ 1265 MHz core, 1828 MHz memory

FPS: 59.7

Score: 2498

Setting: Extreme HD

 

 

How do you get screenshots while Valley is running? When I hit "Print Screen" and paste into mspaint I get nothing but black, so I did a screenshot of my results page instead.

Hit F12 and it will save a screen shot in the user section of your drive in the valley folder

[SteveGrabowski]

Hit F12 and it will save a screen shot in the user section of your drive in the valley folder

 

OK thanks, I'll post my result with a good screenshot.

 

 

CPU: Xeon E3-1231v3 @ 3.4 GHz base clock

GPU: EVGA GTX 970 SC ACX 2.0 @ 1265 MHz core, 1828 MHz memory

FPS: 59.8

Score: 2504

Setting: Extreme HD