Jump to content

"Radeon R9 Fury X" interposer and PCB size revealed (render/picture)

Bouzoo
By Bouzoo
in Tech News
 Share
Posted

Time for facts. Finally (WCCFTech so I hope this is true). We knew it was gonna be a small card, but this is even smaller than I imagined with 19 cm in length. Well if nothing else it's gonna be good for mini ATX power houses (like the shoe Linus & Luke did). And that's a really huge chip (we already saw picture of that).

 

We know that the Fiji XT variant (at the very least) of the internally codenamed ‘Fury’ series will be watercooled. We also know that AMD is planning to release Fiji PRO powered graphic cards as well. If the internal nomenclature AMD is using right now makes it to the shelves then the full die will be called R9 Fury X while the cut die will be called R9 Fury. Both will have exactly 4GB of HBM memory. The card is powered by a 2x 8-pin connector but should have wattage less than 300 Watts.

The PCB of the graphic card is pretty small. Its actually just 19 cm in length. The reason for this is pretty simple, the power circuitry has been moved closer to the die. If you look at the first render you will notice that the chokes and capacitors of the power circuit are much closer to the die than usual. Usually there is a layer of GDDR5 memory in between, something that is completely absent here (obviously). However, while there is no memory layer, the interposer compensates by being pretty damn huge. It measures 55mm by 55mm for a total area of 30.5cm^2. The Fiji die itself should measure around 480-540mm^2 (reverse engineering it from the pictures). A single HDMI 2.0 and 3 DisplayPorts (1.2) are present. Given below is another render of the watercooled FijiXT based graphic card:

 

 

AMD-Radeon-R9-Fury-X-Render-Watercooled-

 

And here is a render of FijiXT

 

AMD-Radeon-R9-Fury-X-Draft-Render-Fiji-X

 

Source

The ability to google properly is a skill of its own. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

These are gonna look silly / cute with an EK FC waterblock in 2 or 3 way Crossfire.

Intel Core i7-5820K (4.4 GHz) | Gigabyte GTX 970 G1 Gaming | Corsair Vengeance LPX 16GB  | 2x 360mm Custom Loop (Noctua iPPC) | ASRock X99 Extreme6 | Samsung 840 EVO 250GB | Fractal Design Define S | Corsair HX750 | Windows 10 | Corsair M65 RGB PRO | Corsair K70 RGB LUX (CherryMX Brown) | Beyerdynamic Custom One Pro & Creative Sound Blaster Z | Nexus 6P (32GB Aluminium) | Check out my setup: Project Kalte Here!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

that port layout though

i9 11900k - NH-D15S - ASUS Z-590-F - 64GB 2400Mhz - 1080ti SC - 970evo 1TB - 960evo 250GB - 850evo 250GB - WDblack 1TB - WDblue 3TB - HX850i - 27GN850-B - PB278Q - VX229 - HP P224 - HP P224 - HannsG HT231 - 450D                                                         
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Hyped, this card is looking to be a game changer for smaller builds

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I want to see someone use a single slot block and cut off part of the I/O shield off for 4 one slot cards in crossfire.

if you want to annoy me, then join my teamspeak server ts.benja.cc

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Wait, DVI is gone?

If you want to reply back to me or someone else USE THE QUOTE BUTTON!                                                      
Pascal laptops guide

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The card practically the size of the calculator on my table.... crazy.

CPU: Intel 3570 GPUs: Nvidia GTX 660Ti Case: Fractal design Define R4  Storage: 1TB WD Caviar Black & 240GB Hyper X 3k SSD Sound: Custom One Pros Keyboard: Ducky Shine 4 Mouse: Logitech G500

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Wait, DVI is gone?

 

its a old out date connector. The card should come with DP to DVI or HDMI adapters so their is no point in having one on the card. also freesync need DP so it has to have 3 to support 3 FS monitors.

if you want to annoy me, then join my teamspeak server ts.benja.cc

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Lol its adorable, I cant wait to see multi-crossifre setups in something like a 900d...its gonna look so silly.

 

:)

CPU: Intel i5 4690k W/Noctua nh-d15 GPU: Gigabyte G1 980 TI MOBO: MSI Z97 Gaming 5 RAM: 16Gig Corsair Vengance Boot-Drive: 500gb Samsung Evo Storage: 2x 500g WD Blue, 1x 2tb WD Black 1x4tb WD Red

 

 

 

 

"Whatever AMD is losing in suddenly becomes the most important thing ever." - Glenwing, 1/13/2015

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

since its has a small PCB it should be easy to make a 2 GPU one, maybe even a 3 or 4 GPU card. 

mmm a tri GPU card, that would be fun too cool.

if you want to annoy me, then join my teamspeak server ts.benja.cc

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It'd look nice / fit well with my mitx build!  :)

Current Rig: i5 3570K @ 4.2 GHz, Corsair H100i, Asus Maximus V Gene, Asus GTX 970 Turbo, Patriot Viper Black Mamba 8 GB DDR-3 1600 (2x4GB), Sandisk 120 GB SSD + Seagate 500 GB HDD + WD Blue 1 TB HDD, XFX 750W Black Edition, Corsair 350D - https://ca.pcpartpicker.com/b/cbxrxr

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

inb4 EVGA mini-itx 980ti w/ hybrid cooler.

R9 3900XT | Tomahawk B550 | Ventus OC RTX 3090 | Photon 1050W | 32GB DDR4 | TUF GT501 Case | Vizio 4K 50'' HDR

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The tubes come out of the front of the card????

 

Deh fuqué? I'd like to inspect their smoking facilities.

In case the moderators do not ban me as requested, this is a notice that I have left and am not coming back.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It's an adorable cute little card :D

| Ryzen 7 7800X3D | AM5 B650 Aorus Elite AX | G.Skill Trident Z5 Neo RGB DDR5 32GB 6000MHz C30 | Sapphire PULSE Radeon RX 7900 XTX | Samsung 990 PRO 1TB with heatsink | Arctic Liquid Freezer II 360 | Seasonic Focus GX-850 | Lian Li Lanccool III | Mousepad: Skypad 3.0 XL / Zowie GTF-X | Mouse: Zowie S1-C | Keyboard: Ducky One 3 TKL (Cherry MX-Speed-Silver) | Beyerdynamic MMX 300 (2nd Gen) | Acer XV272U | OS: Windows 11 |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

These are gonna look silly / cute with an EK FC waterblock in 2 or 3 way Crossfire.

Well since MSI Lightning now seems AMD only, qw might see a Lightning Fury X(That sound wierd, maybe - "Fury X: Lightning Edition", with a "standard" size pcb with beefed up VRMS

Lets all ripperoni in pepperoni

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

The tubes come out of the front of the card????

 

Deh fuqué? I'd like to inspect their smoking facilities.

Makes the card more ascetically pleasing to the eye instead of the tubes coming out the side of the card. If you mounted the radiator in the front of your case the tubes would be harder to notice in windowed cases. Especially considering a lot of cases are covering the drive bays these days.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

inb4 EVGA mini-itx 980ti w/ hybrid cooler.

 

I'd pay good money for a straight up mini-ITX 980 Ti on air. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

its a old out date connector. The card should come with DP to DVI or HDMI adapters so their is no point in having one on the card. also freesync need DP so it has to have 3 to support 3 FS monitors.

And it's basically just HDMI with VGA pins. There's no reason to keep it around, especially with it's big bulky connector.

 

Both my monitors are off of DVI...kill me now

Specs: 4790k | Asus Z-97 Pro Wifi | MX100 512GB SSD | NZXT H440 Plastidipped Black | Dark Rock 3 CPU Cooler | MSI 290x Lightning | EVGA 850 G2 | 3x Noctua Industrial NF-F12's

Bought a powermac G5, expect a mod log sometime in 2015

Corsair is overrated, and Anime is ruined by the people who watch it

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

We know that the Fiji XT variant (at the very least) of the internally codenamed ‘Fury’ series will be watercooled.

What was your first clue?

 

Lisa-SU-FIJI-WATER.jpg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I thought of the best idea; you can keep the shroud on, even with a custom loop. It has a badass shroud and has great cooling at the same time. Win-Win?

FANBOY OF: PowerColor, be quiet!, Transcend, G.Skill, Phanteks

FORMERLY FANBOY OF: A-Data, Corsair, Nvidia

DEVELOPING FANBOY OF: AMD (GPUS), Intel (CPUs), ASRock

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

These are gonna look silly / cute with an EK FC waterblock in 2 or 3 way Crossfire.

 

This time next year.

 

pascalmodule.png

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

This time next year.

 

pascalmodule.png

Is that Pascal with HBM? Cool.

Intel Core i7-5820K (4.4 GHz) | Gigabyte GTX 970 G1 Gaming | Corsair Vengeance LPX 16GB  | 2x 360mm Custom Loop (Noctua iPPC) | ASRock X99 Extreme6 | Samsung 840 EVO 250GB | Fractal Design Define S | Corsair HX750 | Windows 10 | Corsair M65 RGB PRO | Corsair K70 RGB LUX (CherryMX Brown) | Beyerdynamic Custom One Pro & Creative Sound Blaster Z | Nexus 6P (32GB Aluminium) | Check out my setup: Project Kalte Here!

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Tech News

×