Jump to content

3D Printing Them ships (Star Citizen)

CatCloud
By CatCloud
in PC Gaming
 Share
Posted

Sup folks!

So i decided to do some Printing on some of the Ships from Star Citizen. (and maybe some other stuff)
I will keep updating the this post with picture on new ships ones i made them.
If you have any suggestions or maybe want more pictures let me know and ill see what i can do.


Material:
White PLA (somewhat transparent and glossy)
Black PLA (in shipping right now)

The Origin 300i
First one out is the 300i...
http://i.imgur.com/9wxESoy.jpg
http://i.imgur.com/2O2jNXC.jpg
http://i.imgur.com/ofxlULU.jpg
http://i.imgur.com/b4FgDJj.jpg
Sorry for the not so great pictures. :P

Thoughts: my first attempt was acceptable, somewhat rough here and there and i was unable to remove the support parts in certain areas like in the Engines.
The guns were terrible but i remade them.
UPDATE 1: (old) 300i + guns
http://i.imgur.com/djr6CUZ.jpg

 

The Avenger
http://i.imgur.com/4UmPnfk.jpg
http://i.imgur.com/0DuCwJS.jpg

http://i.imgur.com/aQZSOs6.jpg

 

Thoughts: It ended up better then the 300i but still somewhat rough here and there, can be fixed with some sandpaper and a hobby knife.

Looks very nice. too bad i only have this white PLA.  some details are hard to see due to that.
other then that, well it was abit hard to clean up, especially at the Engine area.

You might notice that there is missing a gun at the nose....well  i accidentally ripped it off :P

 

Upcoming ships:
...Maybe a Hornet.
I´ll see if i can make a Freelancer.
Connie (Requested: i´ll see what i can do)

@Jaybird
@MyInnerFred
@Slick

Want to learn how to do it yourself`? Head over here and go for it! 
https://forums.robertsspaceindustries.com/discussion/124108/3d-printing-star-citizen-ships-for-dummies
 

Proud Owner of The Asus Ares III, Card No:19!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I cant believe that you bought a 3d printer

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Well, i wish i bought a bigger/ more advance one :P

Well, i wish i bought the 3d food printer one

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Constellation!! Do it!

"If you do not take your failures seriously you will continue to fail"

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I have always wonder if you can make exact replica of a GPU, then paint it. attaching it to your motherboard. Showing off to your friends that your Fermi isnt really a Fermi and isnt really a Lava Pool

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I have always wonder if you can make exact replica of a GPU, then paint it. attaching it to your motherboard. Showing off to your friends that your Fermi isnt really a Fermi and isnt really a Lava Pool

Possible, but not with mine. those super small fine details are too much for mine.

Maybe with a 3000$+ Printer

Proud Owner of The Asus Ares III, Card No:19!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Possible, but not with mine. those super small fine details are too much for mine.

Maybe with a 3000$+ Prinder

I can see that... How many did you spend on that printer?

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

 800~ usd

 

You couldve spend it on a better GPU than your dying 690.. Please dont save up for a 3d printer, just save up for your dying rig! *sniffs* I hope... that it will live a healthy new life *bursts to tears*

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

So cool bro 10/10

CM Storm Switch Tester MOD (In-Progress) - http://linustechtips.com/main/topic/409147-cm-storm-switch-tester-macro-mod/


       Ammo Can Speaker 02 (Completed) - http://linustechtips.com/main/topic/283826-ammo-can-speakers-02/       A/B Switch V 0.5 (Completed) - http://linustechtips.com/main/topic/362417-ab-switch-v0


     Build 01 - The Life of a Prodigy -  http://linustechtips.com/main/topic/13103-build-01-the-life-of-a-prodigy/             Build 02 - Silent Server 3000 - http://linustechtips.com/main/topic/116670-build-02-silent-server-3000/

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Would look good with a bit of black primer as it's veeery glossy so they look like you carved them out of soap.

Still looks awesome anyways, would be good to see the Aurora.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

have you heard the thread *Unofficial* LTT Fan Designs I feel like you should 3d print them then paint them

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

have you heard the thread *Unofficial* LTT Fan Designs I feel like you should 3d print them then paint them

I have not. I could, but why? 

 

Would look good with a bit of black primer as it's veeery glossy so they look like you carved them out of soap.

Still looks awesome anyways, would be good to see the Aurora.

I know, but i don't have the stuff. I did get my Black PLA today though. dunno if it will be as "soapy" looking but we´ll see ones i print something with it.

lol if they were carved out of soap that would be impressive :P

Note: im trying too change software now so i can do more fine Tuning but im running into issues :(

Thats why i have not uploaded anything yet.

Proud Owner of The Asus Ares III, Card No:19!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I have not. I could, but why? 

J4F :P I mean why not, u cud prunt ut und punt ut tu shuw uvurybudy huw ut wud turn ut

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I have not. I could, but why?

I know, but i don't have the stuff. I did get my Black PLA today though. dunno if it will be as "soapy" looking but we´ll see ones i print something with it.

lol if they were carved out of soap that would be impressive :P

Note: im trying too change software now so i can do more fine Tuning but im running into issues :(

Thats why i have not uploaded anything yet.

carved out of soap... mmm

Famous-characters-Troll-face-Challenge-a

TBH I'm considering buy a 3d printer now just trying to think of how to justify it to the missus and I don't think smashing all the cutlery in the house to 3d print new stuff isn't going to work

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Translation.

You could print it out and show everybody how will it turn out if the fans are real

(NOW)War Horse:

CPU: AMD FX-6300 | Motherboard: MSI 970A-G43 | RAM: Corsair Vengeance Dual Channel 8GB 1600Mhz | GPU: MSI R7790 | Case: Dazumba D-Vito 903 | HDD 1 & 2: Seagate 1TB and Seagate 500GB | PSU: Corsair CX600
(WAS)Old Coop:
CPU: Intel C2D E7500 | Motherboard: Gigabyte G31M-ES2L | RAM: V-Gen 4GB Dual Channel | GPU: Galaxy GT210 | Case: Power-Up ??? | HDD: Seagate 500GB | PSU: Power-up 500W

MyAnimeList Profile | Heaven Society | HEIL THE MIGHTY AND POWERFUL LINUS | My Blog 'Unfinished Pieces' | Code of Conduct

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

carved out of soap... mmm TBH I'm considering buy a 3d printer now just trying to think of how to justify it to the missus and I don't think smashing all the cutlery in the house to 3d print new stuff isn't going to work

"pats on the back" 

Jewelry my friend. Jewelry.

Print her some bracelets and whatnot then dip them in gold. 

Kids toys are just as easy.

@Rashy Point taken. ill Think about it.

Proud Owner of The Asus Ares III, Card No:19!

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

"pats on the back"

Jewelry my friend. Jewelry.

Print her some bracelets and whatnot then dip them in gold.

Kids toys are just as easy.

@Rashy Point taken. ill Think about it.

you sir are a genius

You could print it out and show everybody how will it turn out if the fans are real

Linus is contemplating making actual fans so not much point
Link to comment
Share on other sites
Link to post
Share on other sites
  • 4 weeks later...
Posted
  • Author

This is not really Star Citizen related but Still felt like showing it off :)

http://i.imgur.com/kxMThHB.jpg
http://i.imgur.com/QGAw8jd.jpg
Tachikoma spider-Tank! aw yesh!
I need to clean him up.
Ill get some blue PLA later,do some adjustments to the printer and software (hopefully use a different one) and reprint this guy :)

 

Proud Owner of The Asus Ares III, Card No:19!

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing PC Gaming

×