how to monitor VRM temps on A320M-K

[17030644]

is the motherboard temp the VRM temp?

 

specs: w10 pro 64-bit

software: hwinfo

[Levent]

Run a very CPU intensive load and check what reading also increases accordingly.

[17030644]

1 minute ago, Levent said:

Run a very CPU intensive load and check what reading also increases accordingly.

do you think temp 3, 4, 5 and 6 are functional?

[Levent]

Just now, 17030644 said:

do you think temp 3, 4, 5 and 6 are functional?

If they all display same values, probably they arent.

[17030644]

Just now, Levent said:

If they all display same values, probably they arent.

thank you, I don't know if I should try prime 95 or blender

[Levent]

6 minutes ago, 17030644 said:

thank you, I don't know if I should try prime 95 or blender

Prime95 small FFTs should be the heaviest load out of them.

[17030644]

Just now, Levent said:

Prime95 small FFTs should be the heaviest load out.

and maybe also takes less space?

[17030644]

3 minutes ago, Levent said:

Prime95 small FFTs should be the heaviest load out.

btw I just built this systems (upgraded mobo + cpu + ram)

 

besides igpu drivers, what other drivers should I install?

[Levent]

1 minute ago, 17030644 said:

and maybe also takes less space?

7 minutes ago, Levent said:

Run a very CPU intensive load and check what reading also increases accordingly.

I suggested running a CPU intensive load. It doesnt matter if stress test only utilizes 10mb or all you ram for this test as we are looking to heat up VRMs to see if you have any temperature monitoring. If you were testing RAM and SoC, Intel Burn Test, Linx or any any ram intensive workload would have been better. 

 

[17030644]

1 minute ago, Levent said:

I suggested running a CPU intensive load. It doesnt matter if stress test only utilizes 10mb or all you ram for this test as we are looking to heat up VRMs to see if you have any temperature monitoring. If you were testing RAM and SoC, Intel Burn Test, Linx or any any ram intensive workload would have been better. 

 

what is best? blend or small fft?

 

[Grabhanem]

5 minutes ago, 17030644 said:

what is best? blend or small fft?

 

Small FFT will be the highest CPU load; blend will stress all components more evenly. For VRM testing I'd use Small FFT.

[17030644]

Just now, Grabhanem said:

Small FFT will be the highest CPU load; blend will stress all components more evenly. For VRM testing I'd use Small FFT.

ok ty

 

and like I said I just upgraded cpu + mobo + ram

 

besides igpu drivers? what others should I install?

 

any good practices while installing them?

[17030644]

11 minutes ago, Grabhanem said:

Small FFT will be the highest CPU load; blend will stress all components more evenly. For VRM testing I'd use Small FFT.

 

24 minutes ago, Levent said:

Prime95 small FFTs should be the heaviest load out of them.

besides, the cpu temps, temp3-6 are also ramping up quickly, motherboard stays at 47c

 

idk why cpu max temps at 66c bc on top the cpu temp it reported at 89c, I guess mobo sensor is terribly innacurate