Jump to content

Ryzen 5 2600 only boosting up to 3.7 GHz

HuskyTomato
 Share
Posted

Hey guys, I was doing some encoding the other day and noticed that my Ryzen 5 2600 was only boosting up to 3.7 GHz instead of the advertised 3.9 and was pinned at 100%. I'm currently running the stock wraith stealth cooler, and I'm wondering if that is all I can realistically expect as far as thermal headroom goes. Other possibly related specs: X470 Aorus Ultra Gaming, Corsair LPX Vengence 2400MHz. Thanks for any and all input.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

faster ram since ryzen cpu's really like fast ram and the slowish ram could be slowing down due to that

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
12 minutes ago, HuskyTomato said:

Hey guys, I was doing some encoding the other day and noticed that my Ryzen 5 2600 was only boosting up to 3.7 GHz instead of the advertised 3.9 and was pinned at 100%. I'm currently running the stock wraith stealth cooler, and I'm wondering if that is all I can realistically expect as far as thermal headroom goes. Other possibly related specs: X470 Aorus Ultra Gaming, Corsair LPX Vengence 2400MHz. Thanks for any and all input.

ram holding you back, cooler might be preventing 3.9, or you could just set it in bios

5950x 1.33v 5.05 4.5 88C 195w ll R20 12k ll drp4 ll x570 dark hero ll gskill 4x8gb 3666 14-14-14-32-320-24-2T (zen trfc)  1.45v 45C 1.15v soc ll 6950xt gaming x trio 325w 60C ll samsung 970 500gb nvme os ll sandisk 4tb ssd ll 6x nf12/14 ippc fans ll tt gt10 case ll evga g2 1300w ll w10 pro ll 34GN850B ll AW3423DW

 

9900k 1.36v 5.1avx 4.9ring 85C 195w (daily) 1.02v 4.3ghz 80w 50C R20 temps score=5500 ll D15 ll Z390 taichi ult 1.60 bios ll gskill 4x8gb 14-14-14-30-280-20 ddr3666bdie 1.45v 45C 1.22sa/1.18 io  ll EVGA 30 non90 tie ftw3 1920//10000 0.85v 300w 71C ll  6x nf14 ippc 2000rpm ll 500gb nvme 970 evo ll l sandisk 4tb sata ssd +4tb exssd backup ll 2x 500gb samsung 970 evo raid 0 llCorsair graphite 780T ll EVGA P2 1200w ll w10p ll NEC PA241w ll pa32ucg-k

 

prebuilt 5800 stock ll 2x8gb ddr4 cl17 3466 ll oem 3080 0.85v 1890//10000 290w 74C ll 27gl850b ll pa272w ll w11

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

It could be that the motherboqrd is giving the cpu more voltage than it needs on auto. Perhaps if you manually overclocked it with better voltages it would do better.  

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Personally speaking it's probably a power limit feature in the bios or some bad auto setting, why don't you do the usual youtube OC guide but targeting the actual 3.9 or maybe 4ghz clock instead? It'd ensure it to work properly.

 

Memory Frequency will hold back performance yes, but it has no effect on the CPU frequency, Infinity Fabric doesn't care the frequency of the CPU, it just does it's job, so power settings and or cooling if throttling are the more likely alternatives... worse case scenario? worse silicon ever.

Personal Desktop":

CPU: Intel Core i7 10700K @5ghz |~| Cooling: bq! Dark Rock Pro 4 |~| MOBO: Gigabyte Z490UD ATX|~| RAM: 16gb DDR4 3333mhzCL16 G.Skill Trident Z |~| GPU: RX 6900XT Sapphire Nitro+ |~| PSU: Corsair TX650M 80Plus Gold |~| Boot:  SSD WD Green M.2 2280 240GB |~| Storage: 1x3TB HDD 7200rpm Seagate Barracuda + SanDisk Ultra 3D 1TB |~| Case: Fractal Design Meshify C Mini |~| Display: Toshiba UL7A 4K/60hz |~| OS: Windows 10 Pro.

Luna, the temporary Desktop:

CPU: AMD R9 7950XT  |~| Cooling: bq! Dark Rock 4 Pro |~| MOBO: Gigabyte Aorus Master |~| RAM: 32G Kingston HyperX |~| GPU: AMD Radeon RX 7900XTX (Reference) |~| PSU: Corsair HX1000 80+ Platinum |~| Windows Boot Drive: 2x 512GB (1TB total) Plextor SATA SSD (RAID0 volume) |~| Linux Boot Drive: 500GB Kingston A2000 |~| Storage: 4TB WD Black HDD |~| Case: Cooler Master Silencio S600 |~| Display 1 (leftmost): Eizo (unknown model) 1920x1080 IPS @ 60Hz|~| Display 2 (center): BenQ ZOWIE XL2540 1920x1080 TN @ 240Hz |~| Display 3 (rightmost): Wacom Cintiq Pro 24 3840x2160 IPS @ 60Hz 10-bit |~| OS: Windows 10 Pro (games / art) + Linux (distro: NixOS; programming and daily driver)
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Maybe 3.9GHz only when a single core is under heavy load? all-core turbo is usually lower

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Heat would likely be your main issue. Some temp information would help. 

 

By changing from the stock cooler to the CoolerMaster Hyper 212 Turbo (http://www.coolermaster.com/cooling/cpu-air-cooler/hyper-212-led-turbo/), and applying some Thermal Grizzly Kryonaut, I was able to drop the temps 20c at idle and almost the same at full load. Running mine now at an all core OC of 4ghz. Could potentially go higher but the other system components are low end so haven't tried to push it more. 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

If 3.9GHz is the max clock it will be for single core.  You might find overclocking to be your best solution, however, I can't say how far you'll get on the stock cooler.  

AMD Ryzen 5800X|  Fractal Design S36 360 AIO w/6 Corsair SP120L fans  |  Asus Crosshair VII WiFi X470  |  G.SKILL TridentZ 4400CL19 2x8GB @ 3800MHz 14-14-14-14-30  |  EVGA 3080 FTW3 Hybrid  |  Samsung 970 EVO M.2 NVMe 500GB - Boot Drive  |  Samsung 850 EVO SSD 1TB - Game Drive  |  Seagate 1TB HDD - Media Drive  |  EVGA 650 G3 PSU | Thermaltake Core P3 Case 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

This is my first build so I'm gonna try the easiest option (to me) first. I'm probably gonna upgrade the cooler and see if I get anywhere with that. Thanks for all the replies guys!

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×