Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[MysticalRainXIV]

6 minutes ago, Dabombinable said:

You need almost 1.6 volts to have it stable 

I turned it down for the OC i have right now. Even when I had it higher i couldnt get it stable. Probably just didnt luck out in the silicon lottery. Oh wait, youre surprised i need that much power for stability. Yeah haha I do or windows starts bitching.

Edited August 17, 2016 by MysticalRainXIV

[MrPerforations]

hello forum,

                  odd thread this, have you noticed that the open gl test score decreases each time you run the test?

this also messed up my overclocking as I can get my cpu to 4.6ghz and run prime or occt for an hour, but it will fail to do the open gl test proving that something is unstable, either in cinebench or my cpu or gpu's, which the gpu's are at stock.

 

[Jumper118]

50 minutes ago, MysticalRainXIV said:

@Jumper118 Clocked at 4.789GHz. CineBench is killing me every time I try and run a test at 4.8 and higher, even though my PC passes system stability tests.

Yeah that's a good effort.  I really wouldn't run that more than once or twice on ambient cooling. Also don't even bother running streets tests at that voltage you are literally just degrading the cpu. 

19 minutes ago, MrPerforations said:

hello forum,

                  odd thread this, have you noticed that the open gl test score decreases each time you run the test?

this also messed up my overclocking as I can get my cpu to 4.6ghz and run prime or occt for an hour, but it will fail to do the open gl test proving that something is unstable, either in cinebench or my cpu or gpu's, which the gpu's are at stock.

 

The open gl test is mostly a single. Thread cpu benchmark,  but your gpu had to be stable as well. 

[MrPerforations]

ah, thanks you, so its cpu instability that going on.

[Jumper118]

7 minutes ago, MrPerforations said:

ah, thanks you, so its cpu instability that going on.

Well what error is it?  Does it start the test? What are your system specs

[MrPerforations]

screen freezing lock ups, Its believed to be down to not enough power from the psu, despite luke's video, my 1000 watt psu is maxed out at stock using 950 watts , so overclocking is a no go, thus might be causing it to fail when overclocked. the score goes down each time even when at stock. I'm using amd fx 8350.

[Dabombinable]

1 hour ago, MysticalRainXIV said:

I turned it down for the OC i have right now. Even when I had it higher i couldnt get it stable. Probably just didnt luck out in the silicon lottery. Oh wait, youre surprised i need that much power for stability. Yeah haha I do or windows starts bitching.

I just never expected to see a CPU that isn't a 4670K require that much voltage.

[Jumper118]

2 hours ago, MrPerforations said:

screen freezing lock ups, Its believed to be down to not enough power from the psu, despite luke's video, my 1000 watt psu is maxed out at stock using 950 watts , so overclocking is a no go, thus might be causing it to fail when overclocked. the score goes down each time even when at stock. I'm using amd fx 8350.

No it won't be maxed out in cinebench open gl test at all.  Like I said it only uses 1 thread and maybe 75% of 1 gpu

[done12many2]

4 hours ago, MysticalRainXIV said:

@Jumper118 Clocked at 4.789GHz. CineBench is killing me every time I try and run a test at 4.8 and higher, even though my PC passes system stability tests.

 

Cinebench isn't exactly the easiest CPU bench to pass, but it shouldn't crash if your system is stable.  If your CPU is passing "stability tests", you may want to reevaluate which tests you are using because it's not stable.

[MysticalRainXIV]

19 hours ago, Jumper118 said:

Yeah that's a good effort.  I really wouldn't run that more than once or twice on ambient cooling. Also don't even bother running streets tests at that voltage you are literally just degrading the cpu. 

The open gl test is mostly a single. Thread cpu benchmark,  but your gpu had to be stable as well. 

its on a custom loop right now so temps are mid 60

[Jumper118]

5 minutes ago, MysticalRainXIV said:

its on a custom loop right now so temps are mid 60

well anything above 0c at those volts is going to degrade it. when i was testing skylake on phase i could keep them all below 10c on the hottest core at 1.7v.

[MysticalRainXIV]

Just now, Jumper118 said:

well anything above 0c at those volts is going to degrade it. when i was testing skylake on phase i could keep them all below 10c on the hottest core at 1.7v.

well I just upped myself haha and at a much lower voltage. plus I have the protection plan from microcenter on the cpu so i can literally just walk in and get a new one

[MysticalRainXIV]

15 hours ago, done12many2 said:

 

Cinebench isn't exactly the easiest CPU bench to pass, but it shouldn't crash if your system is stable.  If your CPU is passing "stability tests", you may want to reevaluate which tests you are using because it's not stable.

its stable on AIDA64 for at least 30 minutes so, i dunno man. but i seem to have the issues sorted out

[MrPerforations]

 

info for Jumper118...

amd 8350, asus m5a99x evo, 1866 8gb and couple of gigabyte 280 in crossfire. the other forum I frequent believes it down to not enough power to overclock, this might be true as the psu calculator says I'm up to 950 watts before overclocking.

[Jumper118]

28 minutes ago, MrPerforations said:

 

info for Jumper118...

amd 8350, asus m5a99x evo, 1866 8gb and couple of gigabyte 280 in crossfire. the other forum I frequent believes it down to not enough power to overclock, this might be true as the psu calculator says I'm up to 950 watts before overclocking.

That is complete bullshit  that rig probably uses about 650w at most. Maybe 850w with a big oc. 

[Dabombinable]

14 minutes ago, Jumper118 said:

That is complete bullshit  that rig probably uses about 650w at most. Maybe 850w with a big oc. 

I'd say that the PSU is having problems. My VS650 gives me grief with my 4790K+GTX 970+16GB RAM+2x SSD+1x HDD.

[Jumper118]

1 hour ago, Dabombinable said:

I'd say that the PSU is having problems. My VS650 gives me grief with my 4790K+GTX 970+16GB RAM+2x SSD+1x HDD.

Well it might have issues but its not being over drawn. 

[Dabombinable]

1 hour ago, Jumper118 said:

Well it might have issues but its not being over drawn. 

I know, which is why I said its having issues, because the VS650 definitely isn't being over drawn as well. It used to run just fine with my i5 4440+GTX 970 +GTX 650ti OC 2GB.

[done12many2]

6 hours ago, MysticalRainXIV said:

well I just upped myself haha and at a much lower voltage. plus I have the protection plan from microcenter on the cpu so i can literally just walk in and get a new one

 

If you have the MC protection plan, I'd bust that 6700k's little heart and go get another one.  You will definitely end up with a better chip because the one you have is one of the worse I've seen.

[MysticalRainXIV]

Yeah haha what do you think I'm doint to the poor bastard. I know I got a lower binned 6700k because my buddy is stable at 5.2ghz. so I'm gonna oc it till it dies and go get another one lmao

8 hours ago, done12many2 said:

 

If you have the MC protection plan, I'd bust that 6700k's little heart and go get another one.  You will definitely end up with a better chip because the one you have is one of the worse I've seen.

 

[pmf026]

1251 is my previous score. With a bit of tweaking I just scored 1315 !! I'm happy af)

[MysticalRainXIV]

@Jumper118 you need to change my 6700k score in the doc pls

[Clyne]

I forgot to post these a few days ago

That Q6600 temps....

[Jumper118]

On 8/12/2016 at 1:31 AM, Riley-NZL said:

No problem, watercooling is in so went for a bit of an overclock, nothing extreme  :

 

CPU:1715

GPU:187.27

 

 

 

There's a few processors above me that I reckon I should be beating so might go for an higher overclock tonight, although from reviews it looks like around 4.4-4.5 is the highest I'l get out of it.

i cant see that image, its not big enough and the link doesn't work

9 hours ago, MysticalRainXIV said:

@Jumper118 you need to change my 6700k score in the doc pls

thanks for reminding me  

[Jumper118]

5 minutes ago, Bubblewhale said:

I forgot to post these a few days ago

That Q6600 temps....

 

 

 

i'll do those in a bit