Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[kittenmetal]

So I have run the tests and here are my results, with Cinebench and CPUz

Besides the obvious (Get an intel machine and rebuild what I have) what can I do to really push this further.  I can push the CPU up to 4.8 Ghz however I stepped it back to 4.7 because I noticed some instability. - Using Prime 95 I have tested as Stable and no faults and the maximum temps I saw was 44.5 degrees C, I run the NZXT Kraken X61 Water cooling system.

Let us know!

Need to run the single core test though still.

**********
Update
*********

Ok I have just managed to push my CPU a little further and have these results for you.

[done12many2]

Just now, kittenmetal said:

So I have run the tests and here are my results, with Cinebench and CPUz

Besides the obvious (Get an intel machine and rebuild what I have) what can I do to really push this further.  I can push the CPU up to 4.8 Ghz however I stepped it back to 4.7 because I noticed some instability. - Using Prime 95 I have tested as Stable and no faults and the maximum temps I saw was 44.5 degrees C, I run the NZXT Kraken X61 Water cooling system.

Let us know!

 

Screen shot isn't showing up. 

[kittenmetal]

odd it is showing here I have it linked here too http://prntscr.com/cezpuu

 

 

[DildorTheDecent]

1 minute ago, done12many2 said:

 

Screen shot isn't showing up. 

Open image in new tab

 

this guy...

[done12many2]

7 minutes ago, DildorTheDecent said:

Open image in new tab

 

this guy...

 

So opening the original attached file in a new tab does the trick?  Doesn't work on mobile. 

[done12many2]

13 minutes ago, kittenmetal said:

odd it is showing here I have it linked here too http://prntscr.com/cezpuu

 

 

 

Thanks and ignore me.  I was on my phone and it wasn't showing up.  LTT will never be the same.  

[kittenmetal]

13 minutes ago, done12many2 said:

 

Thanks and ignore me.  I was on my phone and it wasn't showing up.  LTT will never be the same.  

np - and for the record - I can't help but crop the image slightly as I use lightshot... which kinda takes over the print screen key!

[DildorTheDecent]

19 hours ago, done12many2 said:

 

So opening the original attached file in a new tab does the trick?  Doesn't work on mobile. 

You just have to believe 

[done12many2]

21 minutes ago, DildorTheDecent said:

You just have to believe 

 

Yeah, it was sorted out yesterday.  It was a combination of LTT and my explosive Note 7.

[SteelMK]

 

[Dabombinable]

Opened up a rig that I thought had a PGA478 motherboard. Turns out its LGA775, and despite having a Celeron D, AGP and DDR-it can take my QX6850

http://www.gigabyte.com.au/support-downloads/cpu-support-popup.aspx?pid=2186

 

Dis gunna be good

[Parky]

Sorry about the picture. Pushed my i5 6600k to 5.1MHz at 1.3v

[Jumper118]

11 minutes ago, Parky said:

Sorry about the picture. Pushed my i5 6600k to 5.1MHz at 1.3v

5.1mhz?  1.3v. 5.1ghz and slower than a 3570k at 5.1ghz.....hmm you might want to run that again. You should be getting 850cb at that speed. 

[DildorTheDecent]

7 minutes ago, Jumper118 said:

5.1mhz?  1.3v. 5.1ghz and slower than a 3570k at 5.1ghz.....hmm you might want to run that again. You should be getting 850cb at that speed. 

Mustn't be able to boost and try and hold the clock stable. Need more vcore realistically. 

  yup. slows confirmed

[Parky]

18 minutes ago, Jumper118 said:

5.1mhz?  1.3v. 5.1ghz and slower than a 3570k at 5.1ghz.....hmm you might want to run that again. You should be getting 850cb at that speed. 

Yeah I was so confused I didn't get higher. I normally just run @4.5MHz.

I will do a bench at just that.

[Freddie98]

not sure if that's a good score, 

 

Graphics card is Intel HD Graphics 530

[Jumper118]

2 minutes ago, Freddie98 said:

 

not sure if that's a good score, 

 

Graphics card is Intel HD Graphics 530

what motherboard do you have? 

[Darkman]

My 24/7 clocks.

[Freddie98]

4 hours ago, Jumper118 said:

what motherboard do you have? 

Asrock Z170 Extreme4

[Jumper118]

40 minutes ago, Freddie98 said:

Asrock Z170 Extreme4

you should try overclocking it, you should be able to get it upto i5 speeds, there is a bios to allow you to do this here: 

http://overclocking.guide/asrock-z170-non-k-overclocking-guide/ 

[Freddie98]

41 minutes ago, Jumper118 said:

you should try overclocking it, you should be able to get it upto i5 speeds, there is a bios to allow you to do this here: 

http://overclocking.guide/asrock-z170-non-k-overclocking-guide/ 

I've tried, and It doesn't like it, even if I go to 105.000mhz bclk it just fails to boot and boots me into the UFEI, I'm still playing around a little bit. Think they finally released a mico-code update to windows 10?? Will keep looking into it

 

[Jumper118]

46 minutes ago, Freddie98 said:

I've tried, and It doesn't like it, even if I go to 105.000mhz bclk it just fails to boot and boots me into the UFEI, I'm still playing around a little bit. Think they finally released a mico-code update to windows 10?? Will keep looking into it

 

that is only on the normal bios, this bios will allow you to go as high as the cpu will allow if you flash it. there is no microcode update through windows. It was just some bs speculation. 

[Cheddle]

did some skyoc on my GA-Z170N-WIFI i3-6100 - set her to 4.5ghz for now - rock solid stable @ 1.35v - pulling around 460cb - will post a screeenie at one stage. aiming for 4.8ghz next.

[Jumper118]

3 hours ago, Cheddle said:

did some skyoc on my GA-Z170N-WIFI i3-6100 - set her to 4.5ghz for now - rock solid stable @ 1.35v - pulling around 460cb - will post a screeenie at one stage. aiming for 4.8ghz next.

I'm going to guess 4.7ghz max. 

[79 Potatoes]

A CPU I've found in the trash (with MB+GPU)