Jump to content

Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

Jumper118
 Share
SansVarnic
Message added by SansVarnic

Please <SNIP> large quotes.

 

Save an Electron . . . <snip> always.

 

Posted
  • Author
22 minutes ago, wobbler243 said:

Okay should be good.

works for me :)

Rig Specs:

AMD Threadripper 5990WX@4.8Ghz

Asus Zenith III Extreme

Asrock OC Formula 7970XTX Quadfire

G.Skill Ripheartout X OC 7000Mhz C28 DDR5 4X16GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

nA2fZ.png

GPU: R9 290x Lightning @ stock

CPU: AMD FX-8350 @ stock

 

So... I have no clue what good scores are for Cinebench... are these decent...? lol

EDIT: Ran two more times with the following results (collectively)

 

OpenGL: 

  1. 83.60 fps
  2. 83.66 fps
  3. 82.46 fps

CPU:

  1. 614 cb
  2. 608 cb
  3. 607 cb

 

And a shot of round 3 with CPU-Z and GPU-Z up:

nA2NR.png

FX-8350 | GA-990FXA-UD3 | G.SKILL 2x8GB 1600MHz | 1TB WD RE4 | CM Hyper 212 EVO | MSI R9 290x Lightning | Corsair AX860i | Silverstone FT05B-W

Pentium G3258 | MSI Z97 PC Mate | G.SKILL 4x4GB 1066MHz | 500GB Samsung 2.5" | Stock cooler | Pending GPU | EVGA 500B | Antec DF-35

GoPro Hero 3 Silver | Netgear R7000 Nighthawk with DD-WRT | HP Officejet Pro 8610 | Canon iP110 | AudioTechnica ATR2500 USB

Downdraft cooler for mITX board (new build) | Desk mount mic stand | Pop filter | Anti-vibration mount for microphone | mITX case | 3rd monitor (matching existing 23.1" | Intel Core i7-4790K (for mITX build)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
8 hours ago, MblaZe7run said:

nA2fZ.png

GPU: R9 290x Lightning @ stock

CPU: AMD FX-8350 @ stock

 

So... I have no clue what good scores are for Cinebench... are these decent...? lol

EDIT: Ran two more times with the following results (collectively)

 

OpenGL: 

  1. 83.60 fps
  2. 83.66 fps
  3. 82.46 fps

CPU:

  1. 614 cb
  2. 608 cb
  3. 607 cb

 

And a shot of round 3 with CPU-Z and GPU-Z up:

 

Hidden Content

 

Cmon man you can't buy a 290X lightning and run stock :P

 

Those scores seem a bit weak for stock. IIRC my 8320 (which obviously has the lower stock clock) scored around 605.

 

 

LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
22 hours ago, ProKoN said:

well done sir harry. us old guys will have to retire someday. nice to know all the things are in good hands :) I admire your perseverance :)

Packing in seems to be the new cool thing to do :(

LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

1892 at 4.3Ghz. Might push more later, but with air don't want to go beyond 4.4

nespIeq.jpg

EVGA SR-2 / 2x Intel Xeon X5675 4.4Ghz OC / 24GB EEC 1800Mhz OC/ AMD RX570 / Enermax Evoliution 1050W / Main RAID 0: 2x256GB 840EVO SSD / BackUp(1) Raid 5: 3x2TB WD HDD / BackUp(2) 8x2TB / Dell U2412M / Dell U2312HM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, multifrag said:

1892 at 4.3Ghz. Might push more later, but with air don't want to go beyond 4.4

nespIeq.jpg

Lots of SR-2s popping up recently, good effort :)

 

You might have luck dropping the RAM capacity. Ideally you want to be able to run ~2000MHz at CAS7 on 1366 but that will depend on what RAM you have :P

LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, harrynowl said:

Lots of SR-2s popping up recently, good effort :)

I've only seen 2 on the forum. Was a pain in the ass to get one for cheap. Apart some stupid hiccups it's a great board for rendering :) 

EVGA SR-2 / 2x Intel Xeon X5675 4.4Ghz OC / 24GB EEC 1800Mhz OC/ AMD RX570 / Enermax Evoliution 1050W / Main RAID 0: 2x256GB 840EVO SSD / BackUp(1) Raid 5: 3x2TB WD HDD / BackUp(2) 8x2TB / Dell U2412M / Dell U2312HM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, multifrag said:

I've only seen 2 on the forum. Was a pain in the ass to get one for cheap. Apart some stupid hiccups it's a great board for rendering :) 

Yeah they're hard to get. I think one guy in the UK owns a few of them TBH :P mind if I ask what you paid?

 

In the US a lot of them recently went for ~$500 USD.

 

 

LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 hours ago, harrynowl said:

Cmon man you can't buy a 290X lightning and run stock :P

 

Those scores seem a bit weak for stock. IIRC my 8320 (which obviously has the lower stock clock) scored around 605.

 

 

Haven't had the time to piddle with an overclock :P And I'm curious how much my uptime would affect that score. The computer has been on for about a month now, no restarts.

FX-8350 | GA-990FXA-UD3 | G.SKILL 2x8GB 1600MHz | 1TB WD RE4 | CM Hyper 212 EVO | MSI R9 290x Lightning | Corsair AX860i | Silverstone FT05B-W

Pentium G3258 | MSI Z97 PC Mate | G.SKILL 4x4GB 1066MHz | 500GB Samsung 2.5" | Stock cooler | Pending GPU | EVGA 500B | Antec DF-35

GoPro Hero 3 Silver | Netgear R7000 Nighthawk with DD-WRT | HP Officejet Pro 8610 | Canon iP110 | AudioTechnica ATR2500 USB

Downdraft cooler for mITX board (new build) | Desk mount mic stand | Pop filter | Anti-vibration mount for microphone | mITX case | 3rd monitor (matching existing 23.1" | Intel Core i7-4790K (for mITX build)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, MblaZe7run said:

Haven't had the time to piddle with an overclock :P And I'm curious how much my uptime would affect that score. The computer has been on for about a month now, no restarts.

it wouldn't help it :P

 

fresh boots and minimal bloat is best for high scores

 

get it oced asap ;) stock extreme overclocking cards are a very sad sight to see :P

LGA775 Overclocking Guide - LGA771 to LGA 775 mod - Rigs in spoiler - Subzero Overclocker - HWBOT - Sandybridge-E Frequency WR Holder

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, harrynowl said:

it wouldn't help it :P

 

fresh boots and minimal bloat is best for high scores

 

get it oced asap ;) stock extreme overclocking cards are a very sad sight to see :P

I'll get to it as soon as I'm not working on a project for school or work on this machine :P I'll see you in a couple weeks. I'll try a fresh boot and less running in the background after this paper as well :D 

FX-8350 | GA-990FXA-UD3 | G.SKILL 2x8GB 1600MHz | 1TB WD RE4 | CM Hyper 212 EVO | MSI R9 290x Lightning | Corsair AX860i | Silverstone FT05B-W

Pentium G3258 | MSI Z97 PC Mate | G.SKILL 4x4GB 1066MHz | 500GB Samsung 2.5" | Stock cooler | Pending GPU | EVGA 500B | Antec DF-35

GoPro Hero 3 Silver | Netgear R7000 Nighthawk with DD-WRT | HP Officejet Pro 8610 | Canon iP110 | AudioTechnica ATR2500 USB

Downdraft cooler for mITX board (new build) | Desk mount mic stand | Pop filter | Anti-vibration mount for microphone | mITX case | 3rd monitor (matching existing 23.1" | Intel Core i7-4790K (for mITX build)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i7-6770K @ 4.7GHz 
CPU - 1024 (Although best score was 1026, I was not able to achieve it any more)
CPU (Single Core) - 201

GTX 980 (EVGA 980 SC) stock
OpenGL - 167.12Capture.PNG.60e0a7c13e23c2e41892b379f3a4

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, harrynowl said:

Yeah they're hard to get. I think one guy in the UK owns a few of them TBH :P mind if I ask what you paid?

 

In the US a lot of them recently went for ~$500 USD.

 

 

I paid $390, but that was a year ago

EVGA SR-2 / 2x Intel Xeon X5675 4.4Ghz OC / 24GB EEC 1800Mhz OC/ AMD RX570 / Enermax Evoliution 1050W / Main RAID 0: 2x256GB 840EVO SSD / BackUp(1) Raid 5: 3x2TB WD HDD / BackUp(2) 8x2TB / Dell U2412M / Dell U2312HM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, harrynowl said:

You might have luck dropping the RAM capacity. Ideally you want to be able to run ~2000MHz at CAS7 on 1366 but that will depend on what RAM you have :P

I have 32Gb for work. Normally stay at 4.0-4.2 while working and at rendering take it to 4.4. The problem is that after 4.3Ghz only 24 and sometimes even 16Gb of ram are detected :( I'm very happy that ECC 1333mhz can run at 1866mhz

EVGA SR-2 / 2x Intel Xeon X5675 4.4Ghz OC / 24GB EEC 1800Mhz OC/ AMD RX570 / Enermax Evoliution 1050W / Main RAID 0: 2x256GB 840EVO SSD / BackUp(1) Raid 5: 3x2TB WD HDD / BackUp(2) 8x2TB / Dell U2412M / Dell U2312HM

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
16 minutes ago, multifrag said:

I have 32Gb for work. Normally stay at 4.0-4.2 while working and at rendering take it to 4.4. The problem is that after 4.3Ghz only 24 and sometimes even 16Gb of ram are detected :( I'm very happy that ECC 1333mhz can run at 1866mhz

lol. overclocking ecc ram :D 

Rig Specs:

AMD Threadripper 5990WX@4.8Ghz

Asus Zenith III Extreme

Asrock OC Formula 7970XTX Quadfire

G.Skill Ripheartout X OC 7000Mhz C28 DDR5 4X16GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Laptop scores:

Model: Sager NP9758-S

CPU: Core i7-6700K @ Stock

GPU: GTX 970m 6GB @ Stock

 

nAAze.PNG

FX-8350 | GA-990FXA-UD3 | G.SKILL 2x8GB 1600MHz | 1TB WD RE4 | CM Hyper 212 EVO | MSI R9 290x Lightning | Corsair AX860i | Silverstone FT05B-W

Pentium G3258 | MSI Z97 PC Mate | G.SKILL 4x4GB 1066MHz | 500GB Samsung 2.5" | Stock cooler | Pending GPU | EVGA 500B | Antec DF-35

GoPro Hero 3 Silver | Netgear R7000 Nighthawk with DD-WRT | HP Officejet Pro 8610 | Canon iP110 | AudioTechnica ATR2500 USB

Downdraft cooler for mITX board (new build) | Desk mount mic stand | Pop filter | Anti-vibration mount for microphone | mITX case | 3rd monitor (matching existing 23.1" | Intel Core i7-4790K (for mITX build)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Check out this @ProKoN

 

 

I got my 6700k, 5 ghz core & cache @ 1.4v :D

 

 

nAP7n.jpg

Stuff:  i7 7700k @ (dat nibba succ) | ASRock Z170M OC Formula | G.Skill TridentZ 3600 c16 | EKWB 1080 @ 2100 mhz  |  Acer X34 Predator | R4 | EVGA 1000 P2 | 1080mm Radiator Custom Loop | HD800 + Audio-GD NFB-11 | 850 Evo 1TB | 840 Pro 256GB | 3TB WD Blue | 2TB Barracuda

Hwbot: http://hwbot.org/user/lays/ 

FireStrike 980 ti @ 1800 Mhz http://hwbot.org/submission/3183338 http://www.3dmark.com/3dm/11574089

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Lays said:

Check out this @ProKoN

 

 

I got my 6700k, 5 ghz core & cache @ 1.4v :D

 

 

 

xmp timings? 

Rig Specs:

AMD Threadripper 5990WX@4.8Ghz

Asus Zenith III Extreme

Asrock OC Formula 7970XTX Quadfire

G.Skill Ripheartout X OC 7000Mhz C28 DDR5 4X16GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Jumper118 said:

xmp timings? 

just testing bud calm yer boobies.

Stuff:  i7 7700k @ (dat nibba succ) | ASRock Z170M OC Formula | G.Skill TridentZ 3600 c16 | EKWB 1080 @ 2100 mhz  |  Acer X34 Predator | R4 | EVGA 1000 P2 | 1080mm Radiator Custom Loop | HD800 + Audio-GD NFB-11 | 850 Evo 1TB | 840 Pro 256GB | 3TB WD Blue | 2TB Barracuda

Hwbot: http://hwbot.org/user/lays/ 

FireStrike 980 ti @ 1800 Mhz http://hwbot.org/submission/3183338 http://www.3dmark.com/3dm/11574089

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
16 minutes ago, Lays said:

just testing bud calm yer boobies.

ok ok ok. i was expect 6ghz 1400cb first run doe :P

Rig Specs:

AMD Threadripper 5990WX@4.8Ghz

Asus Zenith III Extreme

Asrock OC Formula 7970XTX Quadfire

G.Skill Ripheartout X OC 7000Mhz C28 DDR5 4X16GB  

Super Flower Power Leadex 2000W Psu's X2

Harrynowl's 775/771 OC and mod guide: http://linustechtips.com/main/topic/232325-lga775-core2duo-core2quad-overclocking-guide/ http://linustechtips.com/main/topic/365998-mod-lga771-to-lga775-cpu-modification-tutorial/

ProKoN haswell/DC OC guide: http://linustechtips.com/main/topic/41234-intel-haswell-4670k-4770k-overclocking-guide/

 

"desperate for just a bit more money to watercool, the titan x would be thankful" Carter -2016

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

i5 3570k @4.4Ghz
CPU - 544
CPU (Single Core) - 151 (this one surprised me)

GTX 780
OpenGL - 94.13

Capture.PNG

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Processor - AMD FX-6300

MoBo - Gigabyte 970A-DS3P

Ram - Kingston HyperX Fury 2x4gb 1866 on CL10

Cooler = Hyper 212x on Push and Pull Config
PSU = Corsair VS450

 

Scores on Cinebench R15 -

 

On 4.42Ghz ( My 24x7 OC settings ) = 529

Proof = Screenshot

Ram was clocked at 2230Mhz on CL11

 

On 4.72ghz = 562

Proof = Screenshot

Ram was clocked at 2258mhz on CL11

 

Finally the highest I could achieve....

 

On 4.82ghz = 568

Proof = Screenshot

Ram was clocked at 2248mhz on CL11 

 

I could have achieved better scores on this chip but as you can see, I don't have the best MoBo nor the PSU :P Also I was hitting 70°c on my 4.8ghz so I didn't tried any further OC :)

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×