Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[harrynowl]

Windows 10 is pretty much Windows 8.1 service pack 1, so that's probably why.

Well that'd make it Windows 8 service pack 2

 

It just uses the same version of the NT Kernel

[Dabombinable]

Well that'd make it Windows 8 service pack 2

 

It just uses the same version of the NT Kernel

I was going to say that, but the OS being reported is 8.1.

[Jumper118]

can you include cpuz on the screenshots please and it would also be great if you ran you other pc's too

 

Hi friends

 

@Jumper118 dats tru.  I want that feature tho, considering hwbot has to be the biggest database of hardware "testing" in the entire world, it would be cool if it said which results were global 1/2/3/4/5 as well as like WR if it was a WR.   Then you could compare hardware & scores much easier IMO.

 

 

 

dis me after my shift just now, @ProKoN will like:

 

 

just taking your shoes off................... sure.

 

what do you do at work?

 

CPU - i5-4460

GPU - MSI R9 380 4GB

 

Cinebench says that I'm running Windows 8.1 but as you can clearly see in the screenshot it's Windows 10, dunno why it says that.

 

Screenshot Here - 

 

 

499? really? 

UP7 is still in my main rig. 

 

EP45T-EXTREME is in a secondary rig. 

 

UP7 isn't going anywhere.

[comicsansms]

 

can you include cpuz on the screenshots please and it would also be great if you ran you other pc's too

 

Okay, I'll add that.

I'll do my laptop soon, hopefully it doesn't get cooked in the process!

[Jumper118]

Okay, I'll add that.

I'll do my laptop soon, hopefully it doesn't get cooked in the process!

thanks. put the laptop in the freezer while running the bench. it helps  

[Dabombinable]

Okay, I'll add that.

I'll do my laptop soon, hopefully it doesn't get cooked in the process!

Shitty laptop good desktop syndrome I guess. (And I say that because that's pretty much my PC situation).

[Raudi_]

I might rerun my 4770k I finally got the airflow in my system correct so its got nice ice cold air for intake for the rad

[comicsansms]

Shitty laptop good desktop syndrome I guess. (And I say that because that's pretty much my PC situation).

It not 'bad' but it will melt the polar caps when it is on load!

GTA V hated the crossfire, so sadly the computer I bought GTA V for, doesn't work well on it.

[Dabombinable]

It not 'bad' but it will melt the polar caps when it is on load!

GTA V hated the crossfire, so sadly the computer I bought GTA V for, doesn't work well on it.

Yeah...that's a lot like my Pavillion DV6 3010AX-I still don't know how going from a Phenom II P920 to an N970 can have the CPU temp lower while the palm rest now gets hot enough to actually make it impossible to use the inbuilt keyboard.

[Lays]

If anyone sees a used tek-9 fat pls lemme know

Steponz said Vince would probably hook me up so I may ask if he has one that is scuffed up or something that I can have for a discount.

 

I think I can afford to buy the pot, use it with my 980 a bit, and still sell the 980 to buy a 980 ti afterwards.

[Lays]

@rtsurfer @Jumper118 @ProKoN

 

I talked to Vince and he said he has a few extra tek-9 fat pots laying around that are used, he said he can send me one for $200 shipped w/ all accessories.

Steponz wasn't kidding when he said Vince was a nice guy lol

 

If all goes well, I should be the new owner of a used tek-9 fat pot

[Jumper118]

@rtsurfer @Jumper118 @ProKoN

 

I talked to Vince and he said he has a few extra tek-9 fat pots laying around that are used, he said he can send me one for $200 shipped w/ all accessories.

Steponz wasn't kidding when he said Vince was a nice guy lol

 

If all goes well, I should be the new owner of a used tek-9 fat pot

the hype is real now! welcome the sub zero world. its very cold, but very fast. plenty of points to be had as well!

[Lays]

the hype is real now! welcome the sub zero world. its very cold, but very fast. plenty of points to be had as well!

 

 

I will need your guys help to get started.

 

I am only going to do DICE for now because no way am I buying or renting a dewer, shit costs to much!

 

 

@Jumper118 @ProKoN @rtsurfer

 

 

does this cover basically what I should do?

 

 

Using DICE is similar except you need something for the DICE to react with. The best chemical found to use with DICE is Acetone. Acetone mixed with DICE will be around -88C ideally and you should not have to worry about coldbugs, as with LN2. We recommend that you try to buy your DICE in pellet form or 1KG blocks, then crush it up for maximum surface area. Before you start adding DICE you must pour in some Acetone, as you can see in the pot pictures they have holes drilled in them, pour enough Acetone to cover the holes in the pot so they are slightly overflowing. Again bring the pot down to the lowest temperature and start overclocking. It is important to note that Acetone is flammable, so do not use it near a flame! 

 

http://www.technologyx.com/featured/beginners-guide-subzero-benchmarking/3/

[Jumper118]

I will need your guys help to get started.

 

I am only going to do DICE for now because no way am I buying or renting a dewer, shit costs to much!

 

 

@Jumper118 @ProKoN @rtsurfer

 

 

does this cover basically what I should do?

yeah, thats it. obviously insulate the card and around the pcie slot you are putting the card in first. 

[rtsurfer]

As Jumper said....

[Lays]

r u still awake @Jumper118

I can get either a CPU pot or GPU pot, then buy the other later on.  Wat do? CPU pot is $50 cheaper too

 

my cpu is butthole tho...

 

I hear cpu is easier but idk it doesn't really look all that hard for either one for insulating etc

[ahhming]

2 x 16c   64 thread total

 

just having some fun with new server  :wub:

 

 

http://i.imgur.com/99iLKBD.gifv

[Jumper118]

r u still awake @Jumper118

I can get either a CPU pot or GPU pot, then buy the other later on.  Wat do? CPU pot is $50 cheaper too

 

my cpu is butthole tho...

 

I hear cpu is easier but idk it doesn't really look all that hard for either one for insulating etc

no i wasn't awake at 3:10am this morning. most people get a cpu pot first, as the conventional way is to start with cpu benchmarks and the move to gpu later on, but you don't have do it that way round if you dont think your cpu will scale. 

 

2 x 16c   64 thread total

 

just having some fun with new server  :wub:

how come cpuz says 32c 32t? is that a bug?

[ahhming]

no i wasn't awake at 3:10am this morning. most people get a cpu pot first, as the conventional way is to start with cpu benchmarks and the move to gpu later on, but you don't have do it that way round if you dont think your cpu will scale. 

 

how come cpuz says 32c 32t? is that a bug?

technically its 2x 16c 32T , but im running it in on vmware esxi and allocating it 64thread therefore cpuz only see it that way

[Lays]

@Jumper118 I'm ordering that CPU pot today, then I will save my money and get a 980 TI of some flavor before getting a GPU pot.   Haven't decided whether I want to get a GPU pot first or gpu first tho.

 

I can't decide on whether I want to use LET or eraser >.<

[Gofspar]

@Jumper118 I'm ordering that CPU pot today, then I will save my money and get a 980 TI of some flavor before getting a GPU pot.   Haven't decided whether I want to get a GPU pot first or gpu first tho.

 

I can't decide on whether I want to use LET or eraser >.<

eraser, don't wana rip any caps off.

[Jumper118]

@Jumper118 I'm ordering that CPU pot today, then I will save my money and get a 980 TI of some flavor before getting a GPU pot.   Haven't decided whether I want to get a GPU pot first or gpu first tho.

 

I can't decide on whether I want to use LET or eraser >.<

let if you want to keep the board 4 ever. 

[rtsurfer]

eraser, don't wana rip any caps off.

Smart choice.

let if you want to keep the board 4 ever.

Eraser doesn't leave any residue either. Sometimes a but of white ash kind of stuff, a rag with isopropyl alcohol will take care of that.

[Jumper118]

Smart choice.

Eraser doesn't leave any residue either. Sometimes a but of white ash kind of stuff, a rag with isopropyl alcohol will take care of that.

yeah i use eraser. 

[Lays]

Does haswell CB around -120 to -140? Or is it vastly different with each chip?