OverClocking Fx-8350 to 4.3ghz?

[Cmgroft]

I would love to overclock my cpu to 4.3ghz or more but i figured that would be a good start. I have never overclocked anything before so this is my first time.  My question is how do i start the over clock and after i do what should i be watching? I have a water cooler so i am just wondering how i would start off. Thanks for all you help with this guys 

[Nena Trinity]

I would love to overclock my cpu to 4.3ghz or more but i figured that would be a good start. I have never overclocked anything before so this is my first time.  My question is how do i start the over clock and after i do what should i be watching? I have a water cooler so i am just wondering how i would start off. Thanks for all you help with this guys 

Just increase clock you may not even have to increase voltage!

[DarkEnergy]

I think JayzTwoCents has a good video on the 8350. 

[amp88]

Could you provide some system specs, please? The FX-8350 gets very power hungry at higher clocks, so at the very least you'll be wanting a good quality power supply.

[MuHammer]

I think JayzTwoCents has a good video on the 8350. 

https://www.youtube.com/watch?v=MckeAmnDeTk

[PDArm]

Just use the AMD overdrive utility software to auto oc your chip. If you're not sure what you're doing, its an easy way to go. After just run prime95 for a good hour to make sure everything is running stable. Watch out on your temps, anything above 70c is a no no. Ideally you want it 65 and below.

[Prysin]

First you MUST have a 990FX board for this, there is two 970 board capable of handling it, but 990FX is 100% sure to handle a FX OC

Second, most FX can OC like upwards of 900MHz without touching the voltage

Third get a good cooler. a 240mm radiator like the Cooler Master Nepton 240 is STRONGLY adviced

Fourth Turn off Cool'n'quiet, Turbo Core and C6 state. These will all mess with your OC stability