Posted January 1, 2015 Author Here is a Orange+White+Black one I made. Hopefully the orange color is right. If it isn't I can change it. fox2.png That's beautiful. Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 1, 2015 LTT's color scheme! B) I approve!!! "an obvious supporter of privacy" Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 1, 2015 Author LTT's color scheme! B) I approve!!! Well if they'd like to sponsor a build.. Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 1, 2015 Thanks a lot! If I can find some time, I'll work on the blurry edges on the legs. The Little Red Rendering Hood - Oddball Build Log Nodes - A Concept Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 5, 2015 Author The first order has arrived, and it included (most of) the fittings I'll be using for this build. After making this order I had an idea for something I really wanted to try that would require some 45-degree extension fittings so I went ahead and ordered them with a lot of other key components. I expect that to arrive in a week or so, and I'll update this post accordingly. Bitspower G1/4" Deluxe White Enhance Multi-Link (10/12mm) Bitspower Deluxe White Enhance 90-Degree Dual Multi-Link Adapter Bitspower Deluxe White Enhance Rotary 90-Degree Multi-Link Adapter Bitspower Deluxe White G1/4" Low-Profile Stop Fitting Bitspower Deluxe White Rotary 45-Degree Bitspower continues to impress me with their fittings. I promise that if they look good they look even better in person. The quality is also top-notch; just my feel you can tell these are high-end. That's all for this update, should have another one coming soon when the next package arrives which will include some smaller bits and bobs, additional fittings and a couple of integral parts of a custom loop Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 5, 2015 Author Another quick update: Just had confirmation that customisation on the case will begin very soon with all the details having been finalised The etching will be........ A HUGE thanks to everyone for their input and especially @nicon for taking the time to do some great colour work! Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 5, 2015 You're totally welcome! Fittings look amazing BTW The Little Red Rendering Hood - Oddball Build Log Nodes - A Concept Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 12, 2015 Author Have updated my fittings post with the new arrivals (Single rotary 45-degree adapters). Also received some other stuff which I'm currently photographing and should upload soon in a new post! Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 12, 2015 Author Update 2! 2nd order is now here, and included was a mish-mash of bits and bobs I need or may need for the build. The most important things to arrive were the XSPC radiators I'll be using. Originally, I had intended to purchase EK Coolstreams but I have used these radiators in the past and they are great for dismantling and painting if need be. The PCI-E extension cable is also quite interesting. I don't plan on mounting the GPU traditionally, so I needed something to give me flexibility and believe this is it. It's powered, however, which is ugly and unnecessary so I well get rid of the molex. The fan splitter is fairly straightforward. I'll be mounting it out of view in the rear section of the case (TBA soon) and use it to tidy things up, basically. Enjoy PCI-E x16 Extension Cable Riser ModMyToys 4-Pin PWM Low Profile Power Distributer (8-way) XSPC AX240 and AX360 Radiators (White) Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 12, 2015 Oh my, those are some good looking rads! i7 4770k // Scythe Mugen PCGH 4 // Asus Maximus VI Hero // Crucial Ballistix 2x 4GB 1866 CL9 // MSI GTX 770 2GB Gaming Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 15, 2015 Author Went ahead and edited the front page. Also, I'm expecting some mock-ups of the case soon so I should have some more info coming! Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 24, 2015 Author Yep, big update coming. Here's a teaser: Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 Author Update 3! Cat's officially out of the bag. I'll be building this inside a Parvum Systems S2.0 (modified). I strongly urge you to check out their site as they produce some wonderful things and will basically mod to your own specifications. http://www.parvumsystems.com/ For those unfamiliar with the brand, they actually actually the case that has been shown at the beginning of some of the more recent LTT videos, advertising the "Coolermaster Case Mod Series". I'll have some more full shots of the case soon, but I thought I'd outline what I had done to mine. 1) 240mm to 360mm extension. This lengthens the case and allows installation of a 360mm rad up top, rather than a 240mm rad. 2) Custom front 120mm fan vent. You'll recognize this from the logos I posted previously. 3) Glass side-panel etching. Once again, you should recognise this and see how it maintains the theme with the front panel. 4) mITX compatability mod. This is actually an mATX case, but I had parts for an mITX build ready to go, so that's what I opted for. Communicating with them was a breeze, and I have no doubt I'll return to use them again; extremely satisfied with their work! Anyway, the pics are below. enjoy! (As always, apologies for the potato pics) Modified Front 120 vent Window etching and from the side The Booty Shot And a full-size pic Currently doing some painting and will be asking for people's opinions soon. Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 Vulpes Banner Update - House Paint Slab (with head).jpg Ok, so cat's officially out of the bag. I'll be building this inside a Parvum Systems S2.0 (modified). I strongly urge you to check out their site as they produce some wonderful things and will basically mod to your own sepcifications. http://www.parvumsystems.com/ For those unfamiliar with the brand, they actually actually the case that has been shown at the beginning of some of the more recent LTT videos, advertising the "Coolermaster Case Mod Series". I'll have some more full shots of the case soon, but I thought I'd outline what I had done to mine. 1) 240mm to 360mm extension. This lengthens the case and allows installation of a 360mm rad up top, rather than a 240mm rad. 2) Custom front 120mm fan vent. You'll recognize this from the logos I posted previously. 3) Glass side-panel etching. Once again, you should recognise this and see how it maintains the theme with the front panel. 4) mITX compatability mod. This is actually an mATX case, but I had parts for an mITX build ready to go, so that's what I opted for. Communicating with them was a breeze, and I have no doubt I'll return to use them again; extremely satisfied with their work! Anyway, the pics are below. enjoy! (MORE PICS COMING SOON, WILL EDIT THIS POST WITH THEM) That looks really nice! is the front the only part of the case that is modified? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 Author That looks really nice! is the front the only part of the case that is modified? Nope! As I mentioned above I have had the case extended, made compatible with mITX boards and also have a window etching which I'll get a photo of up tonight. Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 Author Edited previous 'Update' with additional pics of the case. More to come soon! Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 Author Update 4! I need some help, pleaseeeee. I compared the white colour of the case to that of the radiators and was not at all happy with the match. Colours that are similar but not the same clash horribly and the same is true of this, and so I've decided to paint the rads. I have two choices I'd like some help on, orange or black. Now, when choosing the rad colour keep in mind the order of connected parts. The case interior is white, attached to this are white fans, the radiator then attaches next, out of the radiator are the the white Bitspower fittings and then the orange coolant. I'm worried that with an orange radiator the coolant/rad combo might be a bit much and not match perfectly. Oppositely, I'm worried that with black radiators there may not be enough orange in the build (though with the res there probably will be). Let me know which you prefer Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 This is gonna be soooo good. Love the fox theme! "The unexamined life is not worth living" - Apology 38a, Socrates Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 25, 2015 Nope! As I mentioned above I have had the case extended, made compatible with mITX boards and also have a window etching which I'll get a photo of up tonight. OMG I didn't even read it, I was so picture hungry hahaha. It looks amazing, can't wait to see it finished! Edit: I automatically like the black colour for rads, though I think orange would work better in this case. The black would just look more out of place than the orange. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 26, 2015 Author This is gonna be soooo good. Love the fox theme! Thanks! I'm excited for it. OMG I didn't even read it, I was so picture hungry hahaha. It looks amazing, can't wait to see it finished! Edit: I automatically like the black colour for rads, though I think orange would work better in this case. The black would just look more out of place than the orange. I'm really having a hard time working out which would look better so I'm doing what I didn't really want to do and entirely spraying both rads; 1 orange, 1 black. I'll then install them and take some pics to get a better idea of which suits the case best. Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 26, 2015 Author Added additional photos to the 'Radiator Painting' update. I'd really like your thoughts on which is better. At the moment I'm leaning towards orange. It actually matches the orange of the case much more closely than I anticipated and it doesn't look overwhelming. The pictures above were taken with only a few coats as I didn't want to go crazy if I was simply going to repaint them, which is why you can still see the XSPC logo coming through slightly. When I finish the painting I plan on adding the Vulpes logo along the side of each radiator in black (if I do in fact opt for orange radiators). I believe this will look really nice, and continue with the theme which I'm liking more and more every time I check out the case. Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 27, 2015 Author Mini update! Actually received these with the case but finally got around to taking some pics. These are Parvum's own fans, and they look beautiful. They are SP optimized, low noise fans and are made of a soft plastic texture to minimize vibrations. Full disclosure: I haven't actually tested them yet so I can't confirm how low noise they truly are, but I'll definitely do some testing. A close look at the sleeving - pretty nice! Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 27, 2015 Mini update! Actually received these with the case but finally got around to taking some pics. These are Parvum's own fans, and they look beautiful. They are SP optimized, low noise fans and are made of a soft plastic texture to minimize vibrations. Full disclosure: I haven't actually tested them yet so I can't confirm how low noise they truly are, but I'll definitely do some testing. I really like the white frame ones with the black blades and base but in my personal opinion, I think that the black frame with the orange accents would look much better in that case, with the way you have things set up so far. I think that a white frame with the orange accents would look the best but unfortunately Alpenföhn does not make those. My Sig Rig: "X79 (3970X) -Midas"http://pcpartpicker.com/p/wsjGt6" "Midas" Build Log - https://linustechtips.com/main/topic/59768-build-log-in-progress-code-name-midas/ "The Riddler" Custom Watercooled H440 Build Log ( in collaboration with my wife @ _TechPuppet_ ) - http://linustechtips.com/main/topic/149652-green-h440-special-edition-the-riddler-almost-there/ *Riptide Customs* " We sleeve PSU cables " Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 27, 2015 Parvum makes some beautiful cases. I want to get an X1.0 but there's so much room in it for mITX, I would be forced to go way over budged to pack some water cooling in it Also, this an awesome build log so far, how can you get them to do custom cuts like that? https://pcpartpicker.com/b/HtgLrH Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted January 27, 2015 Author Parvum makes some beautiful cases. I want to get an X1.0 but there's so much room in it for mITX, I would be forced to go way over budged to pack some water cooling in it Also, this an awesome build log so far, how can you get them to do custom cuts like that? Super easy, just send them an email with your ideas! Custom Watercooled Parvum Systems S2.0: Vulpes Combining spare parts into something worthy: Frankenstein BitFenix Phenom gaming powerhouse: Blood in the Snow Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now