Jump to content

Mobos with 2 LAN ports. If connected to the same modem, do they make you go faster?

I've seen some mobos with 2 10/100/1000MBps LAN ports, if both are connected to the same modem and service provider, would they theoretically make you go faster, or seamless?

 

Say in scenario 1, my subscription is a 500MBps package, if I have both connected, I can have each port running up to 250MBps, so long as I don't exceed 500MBps. 

In scenario 2, if my subscription were 250MB, the highest both ports can reach is 250MB, roughly 125 each? 

Link to comment
Share on other sites

Link to post
Share on other sites

They are redundant, so if one of your cables breaks or something the other will keep working and you will still have internet connection.

It does not give you any more speed than if you only had one port.

NEW PC build: Blank Heaven   minimalist white and black PC     Old S340 build log "White Heaven"        The "LIGHTCANON" flashlight build log        Project AntiRoll (prototype)        Custom speaker project

Spoiler

Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020

 

Link to comment
Share on other sites

Link to post
Share on other sites

First of all, make sure you use the right units. 1 M-Bytes-ps is equal to 8 M-bits-ps

 

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, jonnyyyl said:

I've seen some mobos with 2 10/100/1000MBps LAN ports, if both are connected to the same modem and service provider, would they theoretically make you go faster, or seamless?

 

Say in scenario 1, my subscription is a 500MBps package, if I have both connected, I can have each port running up to 250MBps, so long as I don't exceed 500MBps. 

In scenario 2, if my subscription were 250MB, the highest both ports can reach is 250MB, roughly 125 each? 

Depending on your OS you could tell certain applications to use one connection over the other, nit really sure what advantage you gain by doing that though.

Link to comment
Share on other sites

Link to post
Share on other sites

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

this doesn't make sense. if the ports are gigabit speed, which i can only assume they would be because putting 10/100 ports on a half/gigabit connection would be retarded, then your cap is the "subscription" rate, not the NIC.

 

 

[FS][US] Corsair H115i 280mm AIO-AMD $60+shipping

 

 

System specs:
Asus Prime X370 Pro - Custom EKWB CPU/GPU 2x360 1x240 soft loop - Ryzen 1700X - Corsair Vengeance RGB 2x16GB - Plextor 512 NVMe + 2TB SU800 - EVGA GTX1080ti - LianLi PC11 Dynamic
 

Link to comment
Share on other sites

Link to post
Share on other sites

The ports in the back of your modem or router are basically part of a network switch, there's a hidden "network port" that connects the switch part to the modem part.

So no matter how many devices you connect to the modem or router, to the ISP you appear as just one device, the modem or router itself.

You can even plug switches to the ports in the back of your modem and then plug computers in those switches..

 

No matter how many devices you plug in you'd still have the maximum speed the ISP gives you, which is configured and limited in the modem part of the equipment.

 

So you won't get faster speeds but what you could do for example - if the modem/router is smart enough - would be for example to configure quality of service rules for different ports (or IP addresses) in the back of the modem.

This way, you'd create special rules for one port that connects to one of your computer's network cards to be optimized for gaming, and another port that connects to your other network card to be "optimized" for streaming netfix..and then you would configure games to use one of the network cards exclusively.

 

Most computers have 2  network cards so that one could be used for internal network (to transfer data fast between computers in the office) and the second network card only for internet - it's safer to not have those computers that store important files and documents connected directly to internet or to some device through which someone from Internet could access files.

 

 

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×