Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***

[Wingfan]

First time using uniengine..I can up the processor to 4.5ghz? Any other advice?

up your cards

[Lord Pantaloons]

Yeah why?

There's no way this is two 7950's, my 760's smashed this score. Hell I almost matched that score with a single 760.

 

Something must be wrong.

[Wingfan]

There's no way this is two 7950's, my 760's smashed this score. Hell I almost matched that score with a single 760.

 

Something must be wrong.

Same with my 760's....i got 3500, so your right something might be wrong

 

And I could come close with my single 280

[Jumper118]

I5-4690K @ 4.2Ghz

 

Sapphire HD 7950 3gb w boost Crossfire

 

that looks like 1 very overclocked 7950 to me. you must only be getting 25-30% usage on the second card. 7850 CF is getting 2611 and 7870/270x cf is getting 2788, so your 7950 should be getting well over 3000

[Wingfan]

that looks like 1 very overclocked 7950 to me. you must only be getting 25-30% usage on the second card. 7850 CF is getting 2611 and 7870/270x cf is getting 2788, so your 7950 should be getting well over 3000

I dont think he has his cards OC'd, could that be the reason for the low number?

[Jumper118]

I dont think he has his cards OC'd, could that be the reason for the low number?

nope. it should get 1600-1700 with one card even at a really low clock. scaling should be at least 80% 25-30% is terrible.

[Lord Pantaloons]

I dont think he has his cards OC'd, could that be the reason for the low number?

no way, I don't think he has crossfire enabled.

[n3krO]

 

CPU: i7 4790k stock speeds

 

I don't know why i get higher scores on 1250 mhz than on 1300 mhz

[Infamous2117]

that looks like 1 very overclocked 7950 to me. you must only be getting 25-30% usage on the second card. 7850 CF is getting 2611 and 7870/270x cf is getting 2788, so your 7950 should be getting well over 3000

 

 

no way, I don't think he has crossfire enabled.

 

 

Yes crossfire is endabled, stock clocks.

 

GPU usage never dips below 60s at its absolute lowest.

 

For examble i have bf4 capped on 100fps on ultra and it rarely dips below 70fps, there is now way in hell i could do that with a single card.

 

Just ran unengine again, check the usage below.

 

[Lord Pantaloons]

 

 

 

 

Yes crossfire is endabled, stock clocks.

 

GPU usage never dips below 60s at its absolute lowest.

 

For examble i have bf4 capped on 100fps on ultra and it rarely dips below 70fps, there is now way in hell i could do that with a single card.

 

Just ran unengine again, check the usage below.

 

One of my 760's does 1800 by itself, and another 7950 CF system is getting 4k points on the doc. You have some serious issue going on.

[Infamous2117]

One of my 760's does 1800 by itself, and another 7950 CF system is getting 4k points on the doc. You have some serious issue going on.

 

 

Any help?

[Wingfan]

Any help?

well, when i used AMD Catalyst Control center i got higher clocks than i did with Afterburner. Maybe try that

 

-edit- Higher Score not clocks, they are the same

[Jumper118]

 

 

 

 

Yes crossfire is endabled, stock clocks.

 

GPU usage never dips below 60s at its absolute lowest.

 

For examble i have bf4 capped on 100fps on ultra and it rarely dips below 70fps, there is now way in hell i could do that with a single card.

 

Just ran unengine again, check the usage below.

 

 

it looks like its averaging out at 60% on both cards. my 25-30% increase wasn't far off your getting a 26% increase from the second card for some reason. it should be at 90-99% all the time

[Wingfan]

it looks like its averaging out at 60% on both cards. my 25-30% increase wasn't far off your getting a 26% increase from the second card for some reason. it should be at 90-99% all the time

could it be that one card might be going bad?

[Jumper118]

could it be that one card might be going bad?

dont know. i've never used cf. its probably a driver issue as valley is a benchmark and so its meant to scale almost perfectly with multiple gpu's. even with 4 way cf or sli.

[Wingfan]

dont know. i've never used cf. its probably a driver issue as valley is a benchmark and so its meant to scale almost perfectly with multiple gpu's. even with 4 way cf or sli.

 it works fine for my SLI, ya a Driver update might be needed

 

Im gonna try and get my score higher than his with my 280 hahaha

[Wingfan]

.

[Infamous2117]

I get great scores on 3dmark firestrike and as i said bf4 runs amazing....

 

Is it possible that unengine is not reading both cards properly?

 

Telling me that other cards score higher isnt going to solve my issue guys.

 

The driver is the latest 14.7, I know crossfire is working because you can see in the graphs performance on the cards is pretty much synced.

[n3krO]

Why are you using the wrong collor codes? I mean, nvidia is obviously the green team and amd the red one:

 

[Infamous2117]

Why are you using the wrong collor codes? I mean, nvidia is obviously the green team and amd the red one:

 

 

 

Color codes in my sig are not the problem here fanboy.

 

If you dont have any useful feedback feel free not to reply.

[n3krO]

Color codes in my sig are not the problem here fanboy.

 

If you dont have any useful feedback feel free not to reply.

 

This thread isn't about you and i wasn't talking to you. I hope no1 solves your problem

[Infamous2117]

This thread isn't about you and i wasn't talking to you. I hope no1 solves your problem

 

 

Have you not read the last two pages? And the responses?

 

All but two of them are in response to my issue and one of them is your douchebag color coding problerm.

[Jumper118]

I get great scores on 3dmark firestrike and as i said bf4 runs amazing....

 

Is it possible that unengine is not reading both cards properly?

 

Telling me that other cards score higher isnt going to solve my issue guys.

 

The driver is the latest 14.7, I know crossfire is working because you can see in the graphs performance on the cards is pretty much synced.

i'm not sure. you might want to try an older driver to test, look at your cpu usage, it should be very low when running valley.

 

Why are you using the wrong collor codes? I mean, nvidia is obviously the green team and amd the red one:

 

that picture doesn't work. i swapped the colours so that fanboys get confused and so people have to read stuff more carefully.

[n3krO]

Have you not read the last two pages? And the responses?

 

All but two of them are in response to my issue and one of them is your douchebag color coding problerm.

 

WOW, you got to make 2 pages about you in a 54 pages long thread about benchmarks.

 

Why don't you open ur own thread so you don't polute this thread even further?

[n3krO]

Sorry for double post but i got to improve my previous score:

 

 

With i7 4790k Stock Clock