Unigine Valley Benchmark Scores Thread + SUPERPOSITION ***Over 1000 Submissions!***

[rritambhar]

i have got a question! does anyone here owns the ASUS Direct CU II GTX 780 model and has run the heaven benchmark too? I just wanted to ask them whethere any of them has ever seen weird artifact during the benchmark! I personally own 2 of these cards, and already have RMAed one for that reason. The weird thing is I saw these artifacts in all these 3 cards! But interestingly they are perfectly fine in every other benchmark and games (like 3dMark,WatchDogs and so on). All these cards have no othere issues whatsoever, runs cool(reaching only 61C in single mode and 71C in SLI), gpu boost pushes them till 1228MHz core and I ran quite a lot stress testing and I found 0 anomaly or other artifacts! Now, I though there might be something wrong with my system then and I used my old gtx580s in SLI(and also in single mode) to verify and found that there is no such artifact when I use these old cards, and thats the same with 750ti, gtx 280 & gtx285 !!! What am I missing here? I would be glad if people here with the same card would reply and clarify if they see the same anomaly too! Thanks.

My setup (if that halps to diagnose the issue)

i7 47770k, gigabyte ga-z97x-gaming gt,8gb ddr3 g-skill ripjaws, 850w psu, and all the cards i have mentioned,and i run only single 1080p monitor. no overclocking in anywhere whatsoever.

[Caimath]

i have got a question! does anyone here owns the ASUS Direct CU II GTX 780 model and has run the heaven benchmark too? I just wanted to ask them whethere any of them has ever seen weird artifact during the benchmark! I personally own 2 of these cards, and already have RMAed one for that reason. The weird thing is I saw these artifacts in all these 3 cards! But interestingly they are perfectly fine in every other benchmark and games (like 3dMark,WatchDogs and so on). All these cards have no othere issues whatsoever, runs cool(reaching only 61C in single mode and 71C in SLI), gpu boost pushes them till 1228MHz core and I ran quite a lot stress testing and I found 0 anomaly or other artifacts! Now, I though there might be something wrong with my system then and I used my old gtx580s in SLI(and also in single mode) to verify and found that there is no such artifact when I use these old cards, and thats the same with 750ti, gtx 280 & gtx285 !!! What am I missing here? I would be glad if people here with the same card would reply and clarify if they see the same anomaly too! Thanks.

My setup (if that halps to diagnose the issue)

i7 47770k, gigabyte ga-z97x-gaming gt,8gb ddr3 g-skill ripjaws, 850w psu, and all the cards i have mentioned,and i run only single 1080p monitor. no overclocking in anywhere whatsoever.

Apparantly the Unigine benchmarks sometimes have issues, I get tons of weird white artifacting in Valley on my Asus DCUII 780. It is the only place I get artifacts and I get them even without overclocking.

 

It's not the cards, you shouldn't worry about it.

[rritambhar]

Apparantly the Unigine benchmarks sometimes have issues, I get tons of weird white artifacting in Valley on my Asus DCUII 780. It is the only place I get artifacts and I get them even without overclocking.

 

It's not the cards, you shouldn't worry about it.

thanks i was kinda worried though, feeling pretty relieved now

[Caimath]

thanks i was kinda worried though, feeling pretty relieved now

Trust me, I was too at first. I was convinced my card was faulty.

[Keponi]

Just got a new pc! (First post on this forum, yay?)

 

Specs

 

CPU : Intel I5 4570

RAM : 16GB kingston HyperX Fury

GPU : MSI GTX 770

PSU : Seasonic m12ii 750w

I'm not exactly sure if my scores are fine for a GTX 770, what do you guys think?

 

[Jumper118]

Just got a new pc! (First post on this forum, yay?)

 

Specs

 

CPU : Intel I5 4570

RAM : 16GB kingston HyperX Fury

GPU : MSI GTX 770

PSU : Seasonic m12ii 750w

I'm not exactly sure if my scores are fine for a GTX 770, what do you guys think?

 

 

 

welcome to the forum. good score, that is the 6th fastest 770 we've had, but they do tend to clock very high.. 

[JamGorby]

A little more fiddling and some new numbers.  

AMD Phenom II x6 1100t @ 4000mhz
EVGA GTX 780 SC with ACX  @ 1255mhz core 1749mhz mem (3498 effective)

[Jumper118]

updated

[JamGorby]

updated

Cheers. 

[Karikiro]

Intel Core i5-4670k @ 3400 MHz (3400MHz)

Sapphire GT 320 (1024MB) @ f_Core= 589 MHz; f_Mem= 891 MHz

4,3 FPS

181

Extreme HD (1920 x 1080)

Edit: Yes, it is a 4670k not 4560k. Sorry for messing this up.

[KeltonDSMer]

Okay I just gave it a go, ran it a few times with various settings and kept the best one.

 

-GB Windforce 270 1110core/1400mem @ stock 1.2v

-8320@4.5ghz

-33.6fps/1404 score

-ExtremeHD

 

 

 

 

There aren't many Pitcairn GPUs to compare with, but hey why not.

[Jumper118]

Okay I just gave it a go, ran it a few times with various settings and kept the best one.

 

-GB Windforce 270 1110core/1400mem @ stock 1.2v

-8320@4.5ghz

-33.6fps/1404 score

-ExtremeHD

 

 

 

 

There aren't many Pitcairn GPUs to compare with, but hey why not.

i know, there are only about 5 or so. it was because this thread used to be the top 30 only so there wasn't much point when all the 780's and 290's and titans were at the top. 

 

 

speaking of which........ i actually borrowed one at some point, ill see if i can find the screenshot.  :rolleyes:

 

here we go

i've already put it on. i was looking at the wrong sheet  :rolleyes:  :wacko:

[KeltonDSMer]

i know, there are only about 5 or so. it was because this thread used to be the top 30 only so there wasn't much point when all the 780's and 290's and titans were at the top. 

 

 

speaking of which........ i actually borrowed one at some point, ill see if i can find the screenshot.  :rolleyes:

 

here we go

i've already put it on. i was looking at the wrong sheet  :rolleyes:  :wacko:

 

Oh that makes sense why there aren't many!

 

Holy smokes what voltage is your 7870 running? I'd like to run this core up, but anything above 1110mhz is unstable at stock 1.2v on this card. Maybe I'll try lowering mem frequency from the stock 1400mhz to get the core higher...obviously it has the bandwidth already judging by your numbers! You get like perfect scaling from my results with a lower mem clock so there does not seem to be any bandwidth issue there!

 

CCC and MSI AB (even with all the voltage boxes checked/unchecked) does not have voltage adjustment for this 270, do you know any programs that do? Maybe Sapphire's software, what's that called, Trix or something right? This thing is only hitting like 60C at 1110/1400, so I'd like to get some more voltage to that gpu to see what it can do!

[Jumper118]

Oh that makes sense why there aren't many!

 

Holy smokes what voltage is your 7870 running? I'd like to run this core up, but anything above 1110mhz is unstable at stock 1.2v on this card. Maybe I'll try lowering mem frequency from the stock 1400mhz to get the core higher...obviously it has the bandwidth already judging by your numbers! You get like perfect scaling from my results with a lower mem clock so there does not seem to be any bandwidth issue there!

 

CCC and MSI AB (even with all the voltage boxes checked/unchecked) does not have voltage adjustment for this 270, do you know any programs that do? Maybe Sapphire's software, what's that called, Trix or something right? This thing is only hitting like 60C at 1110/1400, so I'd like to get some more voltage to that gpu to see what it can do!

270 have locked voltage, you would need a 7870 or 270X bios to overvolt. i think it was a sapphire dual X 7870 GHz edition that was running at 1.3v. it was just the to the end of the slider on afterburner. the memory clock doesn't really effect the 7800 series card. it actually brings your score down.sometimes.

[KeltonDSMer]

270 have locked voltage, you would need a 7870 or 270X bios to overvolt. i think it was a sapphire dual X 7870 GHz edition that was running at 1.3v. it was just the to the end of the slider on afterburner. the memory clock doesn't really effect the 7800 series card. it actually brings your score down.sometimes.

 

Ah, what a shame the voltage is locked in the bios. This 2nd 6 pin pcie power is just there for looks or something lol. I guess they needed something to differentiate it from the 270x, because specs wise I thought they were identical except for clock speeds. Locking voltage in the bios makes a lot of sense, because otherwise why would anyone buy a 270x when they could grab a 270 and move two sliders to save $20! Thanks for the info.

[SpyRosL]

Just got a new pc! (First post on this forum, yay?)

 

Specs

 

CPU : Intel I5 4570

RAM : 16GB kingston HyperX Fury

GPU : MSI GTX 770

PSU : Seasonic m12ii 750w

I'm not exactly sure if my scores are fine for a GTX 770, what do you guys think?

 

 

Now how did that happen?! I outscored you with 1 whole point lol.

Currently i have:

3570k @stock

h61m-sp2v

4gb 1600mhz ram

MSi gtx770 2GD5/OC

 

This is the absolute highest clock i can go. 1mhz more and it crashes

[BoogieBeast]

Here`s mine

[YanYang]

My first PC build results from a while back

 

CPU: i5 4670 using the stock cooler

Mobo: Asus Z87 Pro

RAM: 2x4GB Cosair Vengeance @ 1600Mhz

SSD: 120GB Kingston SSDnow v300

GPU MSI GTX TF 770 2GB Gaming

PSU: EVGA Supernova 650W Gold

 

I have an album with some more benchmarks http://imgur.com/a/9NLd6

 

[Kukielka]

A new king is in the town.

 

Specs:

i7-4770k @ 4,5Ghz (+172mV)

3x R9-290 @ 1125Mhz/1550Mhz (+75mV)

[Lord Pantaloons]

A new king is in the town.

-bloop-

That minimum is awful

[Kukielka]

That minimum is awful

When the szene changes the fps always dip to about 30fps, cant do shit about that (If I can, tell me asap plz :3)

[Lord Pantaloons]

When the szene changes the fps always dip to about 30fps, cant do shit about that (If I can, tell me asap plz :3)

You can't but it's odd that my system manages to stay at/above 30 during the transition and yours doesn't, on a side note you need to list your system specs and running clocks of your cpu/gpu

[Kukielka]

You can't but it's odd that my system manages to stay at/above 30 during the transition and yours doesn't, on a side note you need to list your system specs and running clocks of your cpu/gpu

 

Updated my post

[Lord Pantaloons]

Updated my post

I've been thinking on it and the Tri-Fire would explain the low minimum, during the transitions I've noticed the load on my GPU's dropping quite a bit and the lower FPS is caused by them suddenly becoming loaded very quickly. The increased latency between three GPU's would explain the lower minimum. Still you did just barely edge out the top slot which is SLI Titans, though the fact that it took a 3rd GPU to do it shows how much Valley favors Nvida GPU's.

[Kukielka]

I've been thinking on it and the Tri-Fire would explain the low minimum, during the transitions I've noticed the load on my GPU's dropping quite a bit and the lower FPS is caused by them suddenly becoming loaded very quickly. The increased latency between three GPU's would explain the lower minimum. Still you did just barely edge out the top slot which is SLI Titans, though the fact that it took a 3rd GPU to do it shows how much Valley favors Nvida GPU's.

 

Yep, there are a few benches that favor nvidia gpus. AMD gpus seem to be favoured by pure synthetic benches.