Jump to content

Corsair 5000D AIRFLOW - Airflow questions.

MultiGamerClub
5 hours ago, Jeppes said:

Good temps for a 420W load. Or are you by any chance running it under 300W:s?

Stock gpu any day on this card.. 420w enough as it is when its fully under load.

Useful threads: PSU Tier List | Motherboard Tier List | Graphics Card Cooling Tier List ❤️

Baby: MPG X570 GAMING PLUS | AMD Ryzen 9 5900x /w PBO | Corsair H150i Pro RGB | ASRock RX 7900 XTX Phantom Gaming OC (3020Mhz & 2650Memory) | Corsair Vengeance RGB PRO 32GB DDR4 (4x8GB) 3600 MHz | Corsair RM1000x |  WD_BLACK SN850 | WD_BLACK SN750 | Samsung EVO 850 | Kingston A400 |  PNY CS900 | Lian Li O11 Dynamic White | Display(s): Samsung Oddesy G7, ASUS TUF GAMING VG27AQZ 27" & MSI G274F

 

I also drive a volvo as one does being norwegian haha, a volvo v70 d3 from 2016.

Reliability was a key thing and its my second car, working pretty well for its 6 years age xD

Link to comment
Share on other sites

Link to post
Share on other sites

4 hours ago, fonzz1e said:

your 360 AIO will fit on the top, i'm using 2x 140 fans with 280mm rad so it's a bit tight

 

for my case i have 6x 120mm fan as intake (front & sides), 1x 120mm & 2x 140mm fan as exhaust (top & rear)

i can definitely feel the air coming out of the back & top, i tested the exhaust using incense sticks

 

all my LEDs are ARGB, but i only set them to static yellow 😂

As long as argb supports single colours its good 🙂

 

Afraid not to get the ratio good enough for intake and outtake x)

Useful threads: PSU Tier List | Motherboard Tier List | Graphics Card Cooling Tier List ❤️

Baby: MPG X570 GAMING PLUS | AMD Ryzen 9 5900x /w PBO | Corsair H150i Pro RGB | ASRock RX 7900 XTX Phantom Gaming OC (3020Mhz & 2650Memory) | Corsair Vengeance RGB PRO 32GB DDR4 (4x8GB) 3600 MHz | Corsair RM1000x |  WD_BLACK SN850 | WD_BLACK SN750 | Samsung EVO 850 | Kingston A400 |  PNY CS900 | Lian Li O11 Dynamic White | Display(s): Samsung Oddesy G7, ASUS TUF GAMING VG27AQZ 27" & MSI G274F

 

I also drive a volvo as one does being norwegian haha, a volvo v70 d3 from 2016.

Reliability was a key thing and its my second car, working pretty well for its 6 years age xD

Link to comment
Share on other sites

Link to post
Share on other sites

5 hours ago, fonzz1e said:

your 360 AIO will fit on the top, i'm using 2x 140 fans with 280mm rad so it's a bit tight

 

for my case i have 6x 120mm fan as intake (front & sides), 1x 120mm & 2x 140mm fan as exhaust (top & rear)

i can definitely feel the air coming out of the back & top, i tested the exhaust using incense sticks

 

all my LEDs are ARGB, but i only set them to static yellow 😂

what happens if you turn off the 3 fan on the side? and what happens when you only use the side fans and not the front? temps wise.

I have dyslexia plz be kind to me. dont like my post dont read it or respond thx

also i edit post alot because you no why...

Thrasher_565 hub links build logs

Corsair Lian Li Bykski Barrow thermaltake nzxt aquacomputer 5v argb pin out guide + argb info

5v device to 12v mb header

Odds and Sods Argb Rgb Links

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 hour ago, MultiGamerClub said:

Stock gpu any day on this card.. 420w enough as it is when its fully under load.

Is it under full load ever? Maybe in some games if 4K.

Link to comment
Share on other sites

Link to post
Share on other sites

43 minutes ago, Jeppes said:

Is it under full load ever? Maybe in some games if 4K.

Only with certain games, and it varies between 415w to 432w.. Not sure why it goes over when its completely stock and i havent bothered to underclock / maintain stock mh core clock while making it use less electricity.. Might do that if norwegian electricity goes even more beyond expensive of what it is now 😞

 

But for now, usually goes to 400w+ when i fold and play at the same time.. Even just light 20% folding and games seems to pull some heavy watts lol..

 

But oh man, cyberpunk at everything maxed out doing 60fps at 1440p is truly beautiful.. Until it throws you under the map for unknown reasons that is..

Useful threads: PSU Tier List | Motherboard Tier List | Graphics Card Cooling Tier List ❤️

Baby: MPG X570 GAMING PLUS | AMD Ryzen 9 5900x /w PBO | Corsair H150i Pro RGB | ASRock RX 7900 XTX Phantom Gaming OC (3020Mhz & 2650Memory) | Corsair Vengeance RGB PRO 32GB DDR4 (4x8GB) 3600 MHz | Corsair RM1000x |  WD_BLACK SN850 | WD_BLACK SN750 | Samsung EVO 850 | Kingston A400 |  PNY CS900 | Lian Li O11 Dynamic White | Display(s): Samsung Oddesy G7, ASUS TUF GAMING VG27AQZ 27" & MSI G274F

 

I also drive a volvo as one does being norwegian haha, a volvo v70 d3 from 2016.

Reliability was a key thing and its my second car, working pretty well for its 6 years age xD

Link to comment
Share on other sites

Link to post
Share on other sites

4 hours ago, thrasher_565 said:

what happens if you turn off the 3 fan on the side? and what happens when you only use the side fans and not the front? temps wise.

since my 5000d watercooling setup is front rad intake, top rad exhaust, side intake fans & rear exhaust fan

if i turn off my side intake, coolant temp does suffer a bit (around 3c)

Ryzen 5700x + EK Supremacy D-RGB | 2x8 GB DDR4 Klevv 3200 MT/s | MSI B550M Mortar | Palit 3070 GamingPro LHR + Bykski N-PT3070PRO-X | Corsair RM750 | Alphacool EPDM + QDC | Aquacomputer Quadro + HighFlow2 | EK D5 XTOP | Freezemod 360 30mm rad + Barrow Dabel-20b 360 20mm | Barrow & Freezemod fittings | Corsair 5000D Airflow
 
Audio: beyerdynamic DT 900 Pro X + iFi ZEN Air DAC + Razer Seiren Mini
Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, fonzz1e said:

since my 5000d watercooling setup is front rad intake, top rad exhaust, side intake fans & rear exhaust fan

if i turn off my side intake, coolant temp does suffer a bit (around 3c)

oh i guess i missed that point my bad haha didn't no you had a rad in front...

I have dyslexia plz be kind to me. dont like my post dont read it or respond thx

also i edit post alot because you no why...

Thrasher_565 hub links build logs

Corsair Lian Li Bykski Barrow thermaltake nzxt aquacomputer 5v argb pin out guide + argb info

5v device to 12v mb header

Odds and Sods Argb Rgb Links

 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×