Jump to content

Memory Problems with Asus Tuf Gaming board

ZeusXI
By ZeusXI
in CPUs, Motherboards, and Memory
 Share
Posted

So my friend recently built a computer, and he got the Asus tuf gaming x570-plus (wi-fi) TUF GAMING X570-PLUS (WI-FI) | Motherboards | ASUS USA

 

CPU : Ryzen 3600X

GPU : Radeon RX 5700 XT

 

And we installed 4 x 8GB stick of RAM, Corsair 3600Mhz, and when he boots normally, the computer blue screens. When we set the DOCP profile to 2133, it runs fine, and plays games fine. But once we start messing with higher frequencies, the computer just does not want to work right. We have no updated the BIOS at all, so its whatever BIOS is stock.  Would updating the BIOS possibly help with memory stability? 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, ZeusXI said:

Would updating the BIOS possibly help with memory stability? 

yes but update chipset drivers in the OS first.

 

This is a single kit of memory right?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Try DOCP with just two stick in the Gray slots.

Guides & Tutorials:

PROXMOX - Rebuilding ZFS RAID rpool After Disk Failure

Mass Deploying Customized Windows 10/11 Installs

Building a GNU/Linux Based Windows Deployment Server

GNU/Linux Installer Server: Installation & Configuration

How to: Use (i)PXE to Install Windows from a Network

Why Memorize IP's When You Can Self-Host DNS Instead?

Ventoy - The USB Multi-Boot Utility!

Introduction to PXE/iPXE Network Boot Featuring FreeBSD & Ubuntu Server

 

Don't see what you need? Check the Full List or *PM me, if I haven't made it I'll add it to the list.

*NOTE: I'll only add it to the list if the request is something I know I can do.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
11 minutes ago, Jurrunio said:

yes but update chipset drivers in the OS first.

 

This is a single kit of memory right?

Same memory, 4 dimms. 2 and 2

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, ZeusXI said:

Same memory, 4 dimms. 2 and 2

Mixing the same model of kits does not guarantee the XMP profile will work. Will have to resort to manually tuning the timings or running a lower frequency if updating the BIOS and chipset drivers dont get it stable.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
15 minutes ago, Jurrunio said:

Mixing the same model of kits does not guarantee the XMP profile will work. Will have to resort to manually tuning the timings or running a lower frequency if updating the BIOS and chipset drivers dont get it stable.

I shall keep that in mind. Thank you

 

 

10 minutes ago, Windows7ge said:

Try DOCP with just two stick in the Gray slots.

Ill see about visiting him soon and trying that out. Thank you 

Link to comment
Share on other sites
Link to post
Share on other sites
  • 1 month later...
Posted
3 minutes ago, alkajefry063 said:

i have already tried this before but the profile dont work

then return/sell the memory kits or accept that you need to run lower frequency on the current setup

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×