Jump to content

Trying to Tune my new 10900k

theskaz
 Share
Posted

I gave a 10900k with Asus Strix Z490-E Gaming mobo and 64GB Gskill Trident ram.

 

I have a custom cooling loop that has the following:

2x EK 480mm XE Rads

2x EK 240mm SE Rads

12x Noctua PPC 120mm fans

 

now that that is out of the way....

 

I cant seem to overclock at all without having a high Vcore voltage. some examples

4.9 wont boot without 1.42v if I do it manually. If I leave it automatic using the AI tuning it looks like this:

image.thumb.png.5574c106d69dd4e00e2a3b0d23c7e823.png

 

I would like to get the vcore on a manual overclock down to what you see here. It seems that the heat cannot leave the processor fast enough. I know I have enough cooling. 

 

 

 

 

side note, idle is 70C full load is 80-84 (can spike to 90) does that seem right?

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Idle at 70 is really high unless you slow down pump and fans a lot or stop them completely.

 

Did you manually.tune any loadline calibration?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

yes, level 4 (it was the one recommended for OCing)

 

kicking up the fans brought it down to 55. they are a bit loud though. also, ambient is 85F

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
10 minutes ago, theskaz said:

yes, level 4 (it was the one recommended for OCing)

 

kicking up the fans brought it down to 55. they are a bit loud though. also, ambient is 85F

the noctuas you bought are industrial which are made for airflow instead of silence iirc

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
25 minutes ago, theskaz said:

yes, level 4 (it was the one recommended for OCing)

 

kicking up the fans brought it down to 55. they are a bit loud though. also, ambient is 85F

Are we talking with F or C?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
47 minutes ago, theskaz said:

I gave a 10900k with Asus Strix Z490-E Gaming mobo and 64GB Gskill Trident ram.

 

I have a custom cooling loop that has the following:

2x EK 480mm XE Rads

2x EK 240mm SE Rads

12x Noctua PPC 120mm fans

 

now that that is out of the way....

 

I cant seem to overclock at all without having a high Vcore voltage. some examples

4.9 wont boot without 1.42v if I do it manually. If I leave it automatic using the AI tuning it looks like this:

image.thumb.png.5574c106d69dd4e00e2a3b0d23c7e823.png

 

I would like to get the vcore on a manual overclock down to what you see here. It seems that the heat cannot leave the processor fast enough. I know I have enough cooling. 

 

 

 

 

side note, idle is 70C full load is 80-84 (can spike to 90) does that seem right?

 

https://siliconlottery.com/collections/cometlake/products/10900k49g?variant=32927024840790

 

looks like they should all hit 4.9 all core with 1.325v so something else is going on

5950x 1.33v 5.05 4.5 88C 195w ll R20 12k ll drp4 ll x570 dark hero ll gskill 4x8gb 3666 14-14-14-32-320-24-2T (zen trfc)  1.45v 45C 1.15v soc ll 6950xt gaming x trio 325w 60C ll samsung 970 500gb nvme os ll sandisk 4tb ssd ll 6x nf12/14 ippc fans ll tt gt10 case ll evga g2 1300w ll w10 pro ll 34GN850B ll AW3423DW

 

9900k 1.36v 5.1avx 4.9ring 85C 195w (daily) 1.02v 4.3ghz 80w 50C R20 temps score=5500 ll D15 ll Z390 taichi ult 1.60 bios ll gskill 4x8gb 14-14-14-30-280-20 ddr3666bdie 1.45v 45C 1.22sa/1.18 io  ll EVGA 30 non90 tie ftw3 1920//10000 0.85v 300w 71C ll  6x nf14 ippc 2000rpm ll 500gb nvme 970 evo ll l sandisk 4tb sata ssd +4tb exssd backup ll 2x 500gb samsung 970 evo raid 0 llCorsair graphite 780T ll EVGA P2 1200w ll w10p ll NEC PA241w ll pa32ucg-k

 

prebuilt 5800 stock ll 2x8gb ddr4 cl17 3466 ll oem 3080 0.85v 1890//10000 290w 74C ll 27gl850b ll pa272w ll w11

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 hours ago, Jurrunio said:

Are we talking with F or C?

55C and 85F. sorry for the switch.

 

a stupid mistake I made was thinking the base clock was 4.7. thinking it took over 0.2v just to get it 200MHz higher... i havent been sleeping well lol.

 

ill check out the silicon lottery site and report my findings.

 

thanks all.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 hours ago, xg32 said:

https://siliconlottery.com/collections/cometlake/products/10900k49g?variant=32927024840790

 

looks like they should all hit 4.9 all core with 1.325v so something else is going on

set everything to the specs on that page and ran a short 10min stress test:

image.thumb.png.1e5732ca4bd31e1c6f858f12e186f4a2.png

 

half way through this, I noticed that my 2080 ti was running full bore. it is in the same loop just before the CPU. I like these numbers way better. I turned the GPU off and it had no effect on the temps.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×