-
Posts
74 -
Joined
-
Last visited
Reputation Activity
-
ArthurMorgan reacted to SolarNova in Does AIO radiator placement matter?
Use that point the best you can ..or buy a different case ..or send back the AIO and go with a good Aircooler.
And crucially, use this as a learning experiences to make sure u research before purchasing in the future.
-
ArthurMorgan reacted to joshlowe552 in Configuration of NZXT H510 and Kraken x62
Mr Morgan you just have to have a little faith!
-
ArthurMorgan reacted to Stahlmann in Configuration of NZXT H510 and Kraken x62
You can just connect the 4-pin cables of the AER fans to the pump fan headers and plug the RGB cables into the controller. This way the fan rpm change according to CPU temps and the RGB is addressible in CAM.
Plug the bequiet fans into the controller if you want to use CAM to control them, or use the mobo headers if you want to control them through the BIOS.
-
ArthurMorgan reacted to Semper in AIO Tubing
Excessively sharp bends and/or unnatural shapes can cause leaks and kinks/increased flow resistance, especially over time, at the joints, but they are made to be flexible within reason. Adjusting the orientation of the radiator, and/or different mounting locations can help. You won't be able to replace the tubes with something longer, if you're considering doing this. If at all possible (I'm sure someone somewhere has done so to varying degrees of success), it will be cost prohibitive.
-
ArthurMorgan reacted to LogicalDrm in Connect 4 pin on nzxt x62
Yes. Fan power uses universal connectors. For the most part. If they physically fit, everything is fine.
-
ArthurMorgan reacted to narrdarr in What should I do?
An air cooler doesnt "cool" anything. It moves heats away from the cpu to be dissipated into the atmosphere. which is your room. A new cooler will not make it so can run your a/c less. A new cooler will make the the transfer of heat more efficient so long it is a better cooler. the new cooler will still be affected by your room temp as well, but all coolers will handle this differently to an extent.
You need to remove the heat from the room or not introduce the heat at all.
-
ArthurMorgan reacted to 5x5 in What should I do?
Considering the size of the stealth, this is excellent
-
ArthurMorgan reacted to Haro in B450 Aorus M + RAM
Yea it should be fine. If it wasn't you can set the soc to 1.1 and dram to 1.35 and then gradually work your way up to the advertised speeds.
-
ArthurMorgan reacted to Mateyyy in B450 Aorus M + RAM
The latest version is F51f, if the new memory kit doesn't work with the XMP profile I'd first try updating the BIOS.
Make sure you put the two memory sticks in slots 2 and 4.
-
ArthurMorgan got a reaction from Fasauceome in B450 Aorus M + RAM
Okay, I'll buy it and see what happens lol technically I don't have ram yet. just borrowed this corsair from my sister.
-
ArthurMorgan reacted to Eighjan in Blue Screen during XMP enabled
There's three...
Just searched through the QVL for the RAM you listed in the original post & it doesn't appear to be listed.
Here's the link; it's a huge list: https://download.gigabyte.com/FileList/Memory/mb_memory_b450-aorus_m_matisse_190828.pdf
EDIT:
Same one as further up - my bad; sorry @MadAnt250
-
ArthurMorgan reacted to Void Master in Bought Ryzen 5 3600 without GPU
No, there is nothing to be worried about.
-
ArthurMorgan reacted to TetraSky in Bought Ryzen 5 3600 without GPU
Won't work. Because like you said, the 3600 doesn't have a built-in GPU.
This would work, yes. But the 1050ti can do more than just browsing, sure it won't get you 200 fps in the majority of games, but you should still be able to comfortably play a few if you lower the graphic settings.
-
ArthurMorgan reacted to Slottr in Bought Ryzen 5 3600 without GPU
If you do this, you won't have anything to process your video output. Nothing will show on screen because you won't have anything to do so.