Blue Screen during XMP enabled

[ArthurMorgan]

Hello, My PC goes blue screen when I enable XMP on my Aorus B450m, Ryzen 5 3600 and Corsair Vengeance Pro 2x8gb 3200mhz CMW16GX4M2C3200C16. I think it has something to do with the voltage, but im not really sure of it.

[ArthurMorgan]

2 minutes ago, BlueScope819 said:

Try and fully reset the BIOS and just turn on XMP only, and slowly increase the ram clocks. 2133, 2400, 2666, 3000, 3200 and see if it still crashes.

I just bought the whole PC 6 hours ago and haven't changed any settings at the bios.

[MadAnt250]

19 minutes ago, ArthurMorgan said:

My PC goes blue screen when I enable XMP on my Aorus B450m, Ryzen 5 3600 and Corsair Vengeance Pro 2x8gb 3200mhz.

I have the same board and I am able run my ram speed at 3200Mhz, I hope this link helps.

https://download.gigabyte.com/FileList/Memory/mb_memory_b450-aorus_m_matisse_190828.pdf

[ArthurMorgan]

4 minutes ago, MadAnt250 said:

I have the same board and I am able run my ram speed at 3200Mhz, I hope this link helps.

https://download.gigabyte.com/FileList/Memory/mb_memory_b450-aorus_m_matisse_190828.pdf

This is weird but the module from my corsair box is not in the list

[ArthurMorgan]

8 minutes ago, valdyrgramr said:

In my experience it's the voltage defaulting to the stock voltage.   So, you need to up that to what the package says for the ram.   My guess is the voltage is at 1.2 instead of 1.35 which is required for 3200.

When I activate the XMP the voltage automatically sets to 1.35 from 1.2 

[MadAnt250]

12 minutes ago, ArthurMorgan said:

When I activate the XMP the voltage automatically sets to 1.35 from 1.2 

The voltage is set to auto by default. Is activating XMP the only you tried or did you do anything with the timings also?

[ArthurMorgan]

39 minutes ago, MadAnt250 said:

The voltage is set to auto by default. Is activating XMP the only you tried or did you do anything with the timings also?

I only set XMP from disabled to Profile 1. No further adjustments/settings has been made.

[MadAnt250]

weird

[ArthurMorgan]

7 minutes ago, MadAnt250 said:

Try Profile 2

There is only 1 profile available.

[MadAnt250]

1 minute ago, ArthurMorgan said:

There is only 1 profile available.

Do you have your ram in the correct slots?

[ArthurMorgan]

2 minutes ago, MadAnt250 said:

Do you have your ram in the correct slots?

Yep, slot 2 and 4 only for dual channel. I was thinking that mobo is not supporting my ram? since CMW16GX4M2C3200C16 is not on the list https://download.gigabyte.com/FileList/Memory/mb_memory_b450-aorus_m_matisse_190828.pdf

[Eighjan]

1 minute ago, MadAnt250 said:

Do you have your ram in the correct slots?

Was about to say that... if the 'board is Aorus B450M Elite, you should be using slots 2 & 4 as you move away from the CPU.

[ArthurMorgan]

Just now, Eighjan said:

Was about to say that... if the 'board is Aorus B450M Elite, you should be using slots 2 & 4 as you move away from the CPU.

I did not know there is b450m Elite. I am using Aorus B450M only.

[Eighjan]

Only one I can see on their site that is B450M is the Elite... there's others that aren't Aorus (just Gigabyte), though.

[Eighjan]

 

[ArthurMorgan]

2 minutes ago, Eighjan said:

Only one I can see on their site that is B450M is the Elite... there's others that aren't Aorus (just Gigabyte), though.

https://www.gigabyte.com/ph/Motherboard/B450-AORUS-M-rev-10#kf this is my motherboard. Probably matters where you live, I live in South East Asia.

[ArthurMorgan]

1 minute ago, Eighjan said:

 

First Picture, First column, second row

[Eighjan]

Ah, yes... B450 Aorus M isn't the same as B450M Aorus; I know it sounds picky, but is can matter. 

[ArthurMorgan]

1 minute ago, Eighjan said:

Ah, yes... B450 Aorus M isn't the same as B450M Aorus; I know it sounds picky, but is can matter. 

lol, i did not know there are two version of MATX board for Aorus b450, I was only depending on our local mobos. Sorry. I don't really know why I can't config this to 3200MHz, I guess I should just stick with 2133Mhz

[Eighjan]

9 minutes ago, ArthurMorgan said:

lol, i did not know there are two version of MATX board for Aorus b450, I was only depending on our local mobos. Sorry. I don't really know why I can't config this to 3200MHz, I guess I should just stick with 2133Mhz

There's three...

 

 

Just searched through the QVL for the RAM you listed in the original post & it doesn't appear to be listed.

Here's the link; it's a huge list:  https://download.gigabyte.com/FileList/Memory/mb_memory_b450-aorus_m_matisse_190828.pdf

 

EDIT:

Same one as further up - my bad; sorry @MadAnt250

[ArthurMorgan]

2 minutes ago, Eighjan said:

There's three...

 

 

Just searched through the QVL for the RAM you listed in the original post & it doesn't appear to be listed.

Here's the link; it's a huge list:  https://download.gigabyte.com/FileList/Memory/mb_memory_b450-aorus_m_matisse_190828.pdf

Yep, I think that will solve my problem. I'll just get a new set of RAM. Thanks for the help!

[MadAnt250]

18 minutes ago, ArthurMorgan said:

Yep, slot 2 and 4 only for dual channel. I was thinking that mobo is not supporting my ram?

They label it differently so the recommended slots are DDR-1 and DDR-2 which are spaced apart and should be 2 and 4. So are the dimms in the labeled ddr-1 and ddr-2 slots?

[MadAnt250]

3 minutes ago, Eighjan said:

Just searched through the QVL for the RAM you listed in the original post & it doesn't appear to be listed

There is still compatible modules that are not listed.

[ArthurMorgan]

4 minutes ago, MadAnt250 said:

They label it differently so the recommended slots are DDR-1 and DDR-2 which are spaced apart and should be 2 and 4. So are the dimms in the labeled ddr-1 and ddr-2 slots?

Sorry, I don't get this. I'm not well familiar with memory cards stuff. Can you explain?

[MadAnt250]

Just now, ArthurMorgan said:

Sorry, I don't get this. I'm not well familiar with memory cards stuff. Can you explain?

On your board the DIMM slots are labeled in the order of DDR-4, DDR-2, DDR-3 and DDR-1. So the Ram goes in DDR-2 and DDR-1.