Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[DildorTheDecent]

yes sir captain bossman!

 

http://valid.canardpc.com/ui53kq

multi thread? 

[ProKoN]

multi thread? 

[DildorTheDecent]

 

multi thread? 

 

Nice. Did you do a 4790K multi thread? If you did then that could be top spot. 

[ProKoN]

Nice. Did you do a 4790K multi thread? If you did then that could be top spot

 

oh that one. thought you want more than 1 thread, cause i do multithread

[DildorTheDecent]

oh that one. thought you want more than 1 thread, cause i do multithread

You can definitely say you've the fastest 4790K on LTT cinebench. 

 

Was that with the DICE? And the fabricated pots? 

[Jumper118]

oh that one. thought you want more than 1 thread, cause i do multithread

B) you going to do the pentium as well. i saw the xtu score the other day 

 

You can definitely say you've the fastest 4790K on LTT cinebench. 

 

Was that with the DICE? And the fabricated pots? 

yeah just seen them on hwbot!

[ProKoN]

You can definitely say you've the fastest 4790K on LTT cinebench. 

 

Was that with the DICE? And the fabricated pots? 

yes and yes

[ProKoN]

B) you going to do the pentium as well. i saw the xtu score the other day 

 

yeah just seen them on hwbot!

refer to post 4637 & 4639

 

I think the TIM I got is freezing and becoming ineffective. got some gelid extreme on order but thats gonna take some time to get here. not bad for first my first time around with a homemade pot.

[DildorTheDecent]

yes and yes

Nice. Just looked a HWBOT. The higher results are LN2 guys. Some day you should get LN2. 

 

How did the fabricated pots hold up? 

[Jumper118]

refer to post 4637 & 4639

 

I think the TIM I got is freezing and becoming ineffective. got some gelid extreme on order but thats gonna take some time to get here. not bad for first my first time around with a homemade pot.

wow. it might be a couple of years until i can get things up to these speeds. this sub 0 stuff is next level shit!

[rtsurfer]

oh that one. thought you want more than 1 thread, cause i do multithread

 

 

 

 

 

 

Thought you were gonna freeze the 4790K in the end.? So you benched all your other stuff or just grew impatient..?

[ProKoN]

 

 

 

 

 

Thought you were gonna freeze the 4790K in the end.? So you benched all your other stuff or just grew impatient..?

 

 

ya it was just out of convenience , the pentium powers my mediaserver and i was looking at the nhd 14 and was like screw it...the i7 is right here, lets give er a go. proud to report nothing has died ...yet

 

so  i think the p67 is holding back the 2500k. i tried to bench that one as well but still could not scale to 5.1 or beyond, so im fairly certain it was the board hitting the wall not the chip but its odd i see people using this p67 formula and getting 53x and  54x

 

dice is fun and cheap \ easy to do. still risky if you dont have the cash to replace your parts.

 

so far i have tried

 

99% alcohol

 

methyl hydrate

 

acetone

 

all seem to relatively have the same affect.

 

i think my TIM is holding me back slightly but my results were still competitive , me thinks anyways

 

Jibs and I are working on the next project a la #slumdogindustries

[rtsurfer]

ya it was just out of convenience , the pentium powers my mediaserver and i was looking at the nhd 14 and was like screw it...the i7 is right here, lets give er a go. proud to report nothing has died ...yet

 

so  i think the p67 is holding back the 2500k. i tried to bench that one as well but still could not scale to 5.1 or beyond, so im fairly certain it was the board hitting the wall not the chip but its odd i see people using this p67 formula and getting 53x and  54x

 

dice is fun and cheap \ easy to do. still risky if you dont have the cash to replace your parts.

 

so far i have tried

 

99% alcohol

 

methyl hydrate

 

acetone

 

all seem to relatively have the same affect.

 

i think my TIM is holding me back slightly but my results were still competitive , me thinks anyways

 

Jibs and I are working on the next project a la #slumdogindustries

 

Keep pushing.

 

TIM will help you a bit more, but I advise not to push more voltage through your 4790K on DICE. 1.7V is already too much & don't try more than 1.55-1.6V on XTU on DICE. A lot of the Elite overclockers have killed several chips with XTU even on Ln2.

 

Gee, 1.7V is already out of my comfort zone for DICE.

 

 

Next project.? Gonna make a GPU pot now.?

[ProKoN]

We building a cold water exchanger. Just for shits and giggles. It might work for my 775 board which don't like sub zero operation.

Basically pumping water through a can filled with dice . Water is actually windshield wiper fluid aka water meth so it don't freeze. Gonna omit the radiators out of the loop.

I kill lots of chips on water cooling. Well only 5. Going past 1.8v kills em in a hurry.

I pushed the pentium to 1.86v last night and it survived matter of fact it's doing netflix as we speak clocked at 4.8.

Voltage doesn't scare me but I don't wanna kill good chips either. Intel has never denied any one of my rmas

I will eventually kill a pentium on dice because I want to know how much volts the Haswell core will take before she dies at sub zero temps

[Ally1987]

Im new at overclocking, so dont shot me, ok

[Dabombinable]

We building a cold water exchanger. Just for shits and giggles. It might work for my 775 board which don't like sub zero operation.

Basically pumping water through a can filled with dice . Water is actually windshield wiper fluid aka water meth so it don't freeze. Gonna omit the radiators out of the loop.

I kill lots of chips on water cooling. Well only 5. Going past 1.8v kills em in a hurry.

I pushed the pentium to 1.86v last night and it survived matter of fact it's doing netflix as we speak clocked at 4.8.

Voltage doesn't scare me but I don't wanna kill good chips either. Intel has never denied any one of my rmas

I will eventually kill a pentium on dice because I want to know how much volts the Haswell core will take before she dies at sub zero temps

What's the Pentium your using? Because I've got a 630 and apart from a stint of trying to get it catching fire I haven't even tried doing a proper overclock with it (1.9V was being pushed through it, and the last time I used it it still worked at the stock voltage), and I'm not sure what speed to aim for.

[ProKoN]

What's the Pentium your using? Because I've got a 630 and apart from a stint of trying to get it catching fire I haven't even tried doing a proper overclock with it (1.9V was being pushed through it, and the last time I used it it still worked at the stock voltage), and I'm not sure what speed to aim for.

pentium g3258. its a current 4th generation core series haswell part

 

very different then your 630, which is a couple years past young now

 

I tend to stay away from intel .90nm chips. I thinks this is netburst ughhh slow like molasses

 

 a good speed to push for either is light speed or at least break the sound barrier with a good ol sonic boom

 

if you want an idea of what types of speeds other people have hit with a particular chip I would suggest you search hwbot. I hope you stomp entry #6. tell him prokon sent ya

 

 

 

oh and if any one cares asus has released new bios fo z97 that supports 5th generation.... #prokonsbackstock

[Dabombinable]

pentium g3258. its a current 4th generation core series haswell part

 

very different then your 630, which is a couple years past young now

 

I tend to stay away from intel .90nm chips. I thinks this is netburst ughhh slow like molasses

 

 a good speed to push for either is light speed or at least break the sound barrier with a good ol sonic boom

 

if you want an idea of what types of speeds other people have hit with a particular chip I would suggest you search hwbot

 

 

 

oh and if any one cares asus has released new bios fo z97 that supports 5th generation.... #prokonsbackstock

I know they're slow (especially with HT disabled), but they can take one hell of a beating without failing (the same can't be said about my motherboard/psu-one of them of overloaded yesterday).

[ProKoN]

I know they're slow (especially with HT disabled), but they can take one hell of a beating without failing (the same can't be said about my motherboard/psu-one of them of overloaded yesterday).

 

oh i forgot to mention

 

I have pushed up to 2.1V on lga 775 chips. all were .65nm and .45nm chips

 

did not kill any of them, they still fine for resale.

 

gonna be shifting my 775 inventory over here. looks like jumpy has a large shipment coming in. tried to get a pentium from america but they outta stock. hope they wait for me on dial ups too

[rtsurfer]

We building a cold water exchanger. Just for shits and giggles. It might work for my 775 board which don't like sub zero operation.

Basically pumping water through a can filled with dice . Water is actually windshield wiper fluid aka water meth so it don't freeze. Gonna omit the radiators out of the loop.

I kill lots of chips on water cooling. Well only 5. Going past 1.8v kills em in a hurry.

I pushed the pentium to 1.86v last night and it survived matter of fact it's doing netflix as we speak clocked at 4.8.

Voltage doesn't scare me but I don't wanna kill good chips either. Intel has never denied any one of my rmas

I will eventually kill a pentium on dice because I want to know how much volts the Haswell core will take before she dies at sub zero temps

 

I am speachless.

 

Good Luck with your Water Chiller.

[ProKoN]

I am speachless.

 

Good Luck with your Water Chiller.

 

 

 dont you worry. I am "unofficially" sponsored by my local retailer and their IPR program. its only 5.99 for 2 years coverage on the pentium

[rtsurfer]

 dont you worry. I am "unofficially" sponsored by my local retailer and their IPR program. its only 5.99 for 2 years coverage on the pentium

 

Good to know.

[runit3]

Well the 2550k made it to 5.1 on the new board, which turned out to be a whole other bag of worms. AMI BIOS Flashing utility for a corrupt BIOS was a super fun adventure into the depths of interweb forums. Need new RAM, my 2400 Trident kits were not playing nice with the Z77.

 

Cooling loop will be here next week so with a little finesse I should be able to get past the overvoltage warnings @ 1.55v+ and creep the CB score up a few notches...Now I just need to figure out a damn case for the thing.

[NeatSquidYT]

CineBench R15 scores:

CPU (Pentium G3258 @ 4.6GHz): 275

GPU (MSI GTX 970 @ +69 core offset and around +275 mem. offset): 109.69FPS

[Mr.Dingle]

Dunno... Now your cpu is better than a fx4xxx tho

 

Thats the issue... this thing atm scores higher than my friends 4300 in Cinebench ... like 40 points lower than this 4 ( or 5 ) year old CPU ...