Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[ProKoN]

#SlumdogIndustries

 

 

well it was interesting trial and error last night. p5q pro turbo gets a crazy cold bug so i cant test 775s on that board via sub zero.

 

only got a couple of runs in on the x5650 very little improvement will post score later. we still got some fine tuning to do

 

 

 

 

 

 

[rtsurfer]

I think that should leak Acetone, but then I haven't physically seen it. Make sure to only put as little acetone as you need.

And you'll probably want to move on to a more professional pot once you start getting higher clocks & want to venture into Ln2.

 

Freeze the 4790K already. Want to see how high you go. Good luck.

And again don't slack on insulation or you are gonna have a dead Mobo+CPU.

[Jumper118]

#SlumdogIndustries

 

 

well it was interesting trial and error last night. p5q pro turbo gets a crazy cold bug so i cant test 775s on that board via sub zero.

 

only got a couple of runs in on the x5650 very little improvement will post score later. we still got some fine tuning to do

 

 

 

 

 

 

 

 

 

that is awesome. B)  shame you cant do 775   

[harrynowl]

Dry ice is really hard to get hold of in the UK it seems

[Jumper118]

Dry ice is really hard to get hold of in the UK it seems

is it? i haven't looked

[harrynowl]

is it? i haven't looked

seems to be

[DildorTheDecent]

seems to be

Have you looked at suppliers? http://polarice.co.uk/

 

Based here in Northern Ireland apparently. 

[harrynowl]

Have you looked at suppliers? http://polarice.co.uk/

 

Based here in Northern Ireland apparently. 

Well in the US you can just pop to a grocery store and buy a kilo for $5

[Dabombinable]

Just about to start Cinebench - changing the stock Northbridge heatsink for the active one that I bought for the P5K has made a difference - even the higher quality motherboards have heatsinks that suck.
Edit: about 15^oC headroom as well before it hits the supposed limit of 75^oC as well.

[ProKoN]

Well in the US you can just pop to a grocery store and buy a kilo for $5

I found it at a place that supplies welding equipment and gases etc. Gave the guy five bucks he filled my cooler and pocketed the cash. Call your local ice company if they dont carry it they can prolly recommend a retailer

[DildorTheDecent]

Well in the US you can just pop to a grocery store and buy a kilo for $5

If only the UK was free. 

[harrynowl]

I found it at a place that supplies welding equipment and gases etc. Gave the guy five bucks he filled my cooler and pocketed the cash. Call your local ice company if they dont carry it they can prolly recommend a retailer

local ice company? my fridge freezer or outside in winter

[Jumper118]

Ai Tweaker

Ai Overclock Tuner: Manual

CPU Ratio Setting: 9.5

FSB Frequency: 465

PCIE Frequency: 100

FSB Strap to North Bridge: Auto

DRAM Frequency: DDR2-901MHz

DRAM Timing Control: Auto@5-5-5-15 (with 4-4-4-12 being manually set at 800MHz)

DRAM Static Read Control: Auto

DRAM Read Training: Auto

MEM. OC Charger: Auto

Ai Clock Twister: Auto

Ai Transaction Booster: Auto

CPU Voltage: 1.4125

CPU GTL Reference: Auto

CPU PLL Voltage: Auto

FSB Termination Voltage: Auto

DRAM Voltage: 2.20 (Xtreeme Dark maximum official rating, 2V supposed maximum for HyperX-same stock timings off 4-4-4-12 either way)

NB Voltage: Auto

SB Voltage: Auto

PCIE SATA Voltage: Auto

Load-Line Calibration: Enabled

CPU Spread Spectrum: Auto

PCIE Spread Spectrum: Auto

CPU Clock Skew: Auto

NB Clock Skew: Auto

CPU Margin Enhancement: Optimized

CPU settings

CPU Ratio Setting: 9.5

C1E Support: Disabled

Max CPUID Value Limit: Disabled

Intel Virtulization Tech: Enabled

CPU TM Function: Enabled

Execute Disable Bit: Enabled

Team Xtreem Dark 1GBx2: @800MHz=4-4-4-12, voltage at 1.8, though rated at 2-2.2V.

Kingston HyperX 2GBx1: @800MHz=4-4-4-12, voltage at 1.8, though rated at 2V.

Edit: @Jumper118

so are you using 2 different kits of ram? this could be something to do with it if one kit can clock high than the other. the fsb speed is quite high as well so you might want to set those manually. maybe try 1.25v to start with an work it up from there

[rtsurfer]

Well in the US you can just pop to a grocery store and buy a kilo for $5

$5 per KG is expensive.

I get 10lbs or approximately 4.53Kg for $12ish..

[harrynowl]

$5 per KG is expensive.

I get 10lbs or approximately 4.53Kg for $12ish..

nice, they'd probably want £50 for 10kg here.

[rtsurfer]

nice, they'd probably want £50 for 10kg here.

That's terrible.

I am now looking in to finding a good LN2 supplier. Hopefully I can find something reasonable.

[DildorTheDecent]

That's terrible.

I am now looking in to finding a good LN2 supplier. Hopefully I can find something reasonable.

You can get LN2 "for science" 

 

If you're looking pots, @ProKoN and the BeanCan® can be experimented with. 

[rtsurfer]

You can get LN2 "for science"

If you're looking pots, @ProKoN and the BeanCan® can be experimented with.

Yes. I have heard of people telling their suppliers that they are using it for personal science. Unless you let them know that, they charge you the "Commercial" rate which is usually higher.

I already own a Kingpin CPU & GPU pot so I am covered already.

[Dabombinable]

so are you using 2 different kits of ram? this could be something to do with it if one kit can clock high than the other. the fsb speed is quite high as well so you might want to set those manually. maybe try 1.25v to start with an work it up from there

The reason I'm using the different kits at the same time (Win 7 64 bit uses less than 800MB for me-I could run it on 2GB) is because people have had both of them running at 1066MHz, and because they have the same timings. The problem at any rate was the shitty passive NB heatsink wasn't doing its job. The active cooler I'm using now-which as it happens was bought for my dead P5K motherboard-is running warm but not hot at the same settings as I was previously running at 4.44GHz. (This cooler, after 10 years I was still able to get one new in box: http://www.overclockersonline.net/?p=5000286)

[DildorTheDecent]

Yes. I have heard of people telling their suppliers that they are using it for personal science. Unless you let them know that, they charge you the "Commercial" rate which is usually higher.

I already own a Kingpin CPU & GPU pot so I am covered already.

oooh. K|NGP|N has pretty pots. You going for records. 

[Jumper118]

The reason I'm using the different kits at the same time (Win 7 64 bit uses less than 800MB for me-I could run it on 2GB) is because people have had both of them running at 1066MHz, and because they have the same timings. The problem at any rate was the shitty passive NB heatsink wasn't doing its job. The active cooler I'm using now-which as it happens was bought for my dead P5K motherboard-is running warm but not hot at the same settings as I was previously running at 4.44GHz. (This cooler, after 10 years I was still able to get one new in box: http://www.overclockersonline.net/?p=5000286)

that heatsink look good if you point a small fan at its you should be able to do over 1.3v on the nb

[rtsurfer]

oooh. K|NGP|N has pretty pots. You going for records. 

 

I'll be going for the records slowly. Thing is I am only a college students so money is always at a short here. I can't afford to splurge money on new GPUs & DICE/LN2. On the otherhand quite a few(not all) of the top OverClockers have already graduated & work professional jobs so they can spend more money.

 

I'll get there, but it will take time.

[ProKoN]

any good

 

I'll be going for the records slowly. Thing is I am only a college students so money is always at a short here. I can't afford to splurge money on new GPUs & DICE/LN2. On the otherhand quite a few(not all) of the top OverClockers have already graduated & work professional jobs so they can spend more money.

 

I'll get there, but it will take time.

any suggestions for TIM. all the ones I own freeze at sub zero

 

i have been using 99% alcohol as the catalyst. is acetone any better?

 

im working on better insulation all round. last night was a preliminary run.

 

grabbed another cooler full of dice for 5cad...oh soo cheap.

 

if anyone lives in or close to a major urban center this stuff should be readily available. it took me 2 phone calls to source it. i have found some ln2 but its not very cost effective. I can get a 5 foot bottle for $281.00 cad

 

i dont have alot of cash either, but i got some old heatsinks, scrap copper and some simple hand tools lol

 

the i7 will be last on the list to bench. tonight im going pentium styles on the maximus 6 formula or 2500k . but the 2500k is a chitty chip

 

nice to see you round here rt123. just dropped that 1051 bomb and i was like damn i seen that score before lol.  i like your pipe smoking avatar, link it up

[Gofspar]

any good

 

any suggestions for TIM. all the ones I own freeze at sub zero

 

i have been using 99% alcohol as the catalyst. is acetone any better?

 

im working on better insulation all round. last night was a preliminary run.

 

grabbed another cooler full of dice for 5cad...oh soo cheap.

 

if anyone lives in or close to a major urban center this stuff should be readily available. it took me 2 phone calls to source it. i have found some ln2 but its not very cost effective. I can get a 5 foot bottle for $281.00 cad

 

i dont have alot of cash either, but i got some old heatsinks, scrap copper and some simple hand tools lol

 

the i7 will be last on the list to bench. tonight im going pentium styles on the maximus 6 formula or 2500k . but the 2500k is a chitty chip

liquid pro cuz yolo clocking is fun

[ProKoN]

liquid pro cuz yolo clocking is fun

 

my chips POLO