Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[ProKoN]

jibs and i are going Dice tonight if all goes well. Found it for $4.50cad/kg

[Dabombinable]

Deltas or watercool. 

 

Or purchase one of the first, BeanCan® pots made by @ProKoN 

Rad=Radiator=Watercooling. I just tried the Intel Burn test, and with the fan (fricken loud piece of cooler master shit-it moves a lot of air though) at 100%, it passed 85^oC instantly and caused a BSOD.

[harrynowl]

Rad=Radiator=Watercooling. I just tried the Intel Burn test, and with the fan (fricken loud piece of cooler master shit-it moves a lot of air though) at 100%, it passed 85^oC instantly and caused a BSOD.

Your CPU?

 

My E3300 @1.7V topped at 64c in IBT. That 1MB cache probably helps keep it cool.

[DildorTheDecent]

jibs and i are going Dice tonight if all goes well. Found it for $4.50cad/kg

Nice. Plenty of ventilation is needed though. Stay safe and destroy clocks. 

 

Rad=Radiator=Watercooling. I just tried the Intel Burn test, and with the fan (fricken loud piece of cooler master shit-it moves a lot of air though) at 100%, it passed 85^oC instantly and caused a BSOD.

wow. that doesn't sound fun. 

[Jumper118]

jibs and i are going Dice tonight if all goes well. Found it for $4.50cad/kg

moving into the extreme league are we?

[Dabombinable]

Your CPU?

 

My E3300 @1.7V topped at 64c in IBT. That 1MB cache probably helps keep it cool.

My computers are retarded, I even spent another $30 on arctic silver and took my time putting everything together (I have some semblance of cable management) and generally giving it the full royal treatment and I still have thermal issues. Though at least the Seidon is now outperforming the Winner S915 cooler (not by much though).

 

-snip-

wow. that doesn't sound fun.

Maybe if I get my P5K up and running, I'm going to try and set it on fire with my P4 630 if possible. (Already had a few close calls with the Xeon X5450).

[Jumper118]

My computers are retarded, I even spent another $30 on arctic silver and took my time putting everything together (I have some semblance of cable management) and generally giving it the full royal treatment and I still have thermal issues. Though at least the Seidon is now outperforming the Winner S915 cooler (not by much though).

thats sounds bad i start at 1.5v and work my way up. i usually top out at about 1.65-1.675v on these pentium dual cores on air. they are in the 90's at that point 

[Dabombinable]

thats sounds bad i start at 1.5v and work my way up. i usually top out at about 1.65-1.675v on these pentium dual cores on air. they are in the 90's at that point 

1.4125V is the setting in the bios, though being a true overclocking motherboard and not just a toy-I honestly have no clue as to what I should tweak, and how I should tweak it. If only it was as simple as my Mum's old laptop (I'm still surprised that it could keep an early P4 below 60^oC when it was at 3.9GHz-near silent btw, only a very slight amount of fan noise).

[harrynowl]

I need a better dual core

[Dabombinable]

Yep, unstable as hell at 4.42GHz-just watching a video on Youtube and the Nortbridge overheated. I think its time for the little NB active ice cooler to see some proper use (its on my Geforce 256).

[Jumper118]

1.4125V is the setting in the bios, though being a true overclocking motherboard and not just a toy-I honestly have no clue as to what I should tweak, and how I should tweak it. If only it was as simple as my Mum's old laptop (I'm still surprised that it could keep an early P4 below 60^oC when it was at 3.9GHz-near silent btw, only a very slight amount of fan noise).

write all your bios settings down and post them here. 

I usually change

base clock

ram speed

ram timings (first 4)

cpu volts up to 1.7v

NB voltage 1.25-1.4v 

ram voltage 1.8-2.2v

FSB voltage 1.25-1.4v

diable C state 

disable spectrum spread on cpu

LLC enabled 

[Dabombinable]

write all your bios settings down and post them here. 

I usually change

base clock

ram speed

ram timings (first 4)

cpu volts up to 1.7v

NB voltage 1.25-1.4v 

ram voltage 1.8-2.2v

FSB voltage 1.25-1.4v

diable C state 

disable spectrum spread on cpu

LLC enabled 

I've got to enter the bios, but for a start I've only touched the CPU voltage, DRAM voltage, RAM speed and FSB speed with everything else at auto (with load line calibration enabled).

[Jumper118]

I've got to enter the bios, but for a start I've only touched the CPU voltage, DRAM voltage, RAM speed and FSB speed with everything else at auto (with load line calibration enabled).

what are the recommend timings and voltage for your ram and what speed are you running it at when overclocked?

[Dabombinable]

write all your bios settings down and post them here. 

I usually change

base clock

ram speed

ram timings (first 4)

cpu volts up to 1.7v

NB voltage 1.25-1.4v 

ram voltage 1.8-2.2v

FSB voltage 1.25-1.4v

diable C state 

disable spectrum spread on cpu

LLC enabled 

Ai Tweaker

Ai Overclock Tuner: Manual

CPU Ratio Setting: 9.5

FSB Frequency: 465

PCIE Frequency: 100

FSB Strap to North Bridge: Auto

DRAM Frequency: DDR2-901MHz

DRAM Timing Control: Auto@5-5-5-15 (with 4-4-4-12 being manually set at 800MHz)

DRAM Static Read Control: Auto

DRAM Read Training: Auto

MEM. OC Charger: Auto

Ai Clock Twister: Auto

Ai Transaction Booster: Auto

CPU Voltage: 1.4125

CPU GTL Reference: Auto

CPU PLL Voltage: Auto

FSB Termination Voltage: Auto

DRAM Voltage: 2.20 (Xtreeme Dark maximum official rating, 2V supposed maximum for HyperX-same stock timings off 4-4-4-12 either way)

NB Voltage: Auto

SB Voltage: Auto

PCIE SATA Voltage: Auto

Load-Line Calibration: Enabled

CPU Spread Spectrum: Auto

PCIE Spread Spectrum: Auto

CPU Clock Skew: Auto

NB Clock Skew: Auto

CPU Margin Enhancement: Optimized

CPU settings

CPU Ratio Setting: 9.5

C1E Support: Disabled

Max CPUID Value Limit: Disabled

Intel Virtulization Tech: Enabled

CPU TM Function: Enabled

Execute Disable Bit: Enabled

what are the recommend timings and voltage for your ram and what speed are you running it at when overclocked?

Team Xtreem Dark 1GBx2: @800MHz=4-4-4-12, voltage at 1.8, though rated at 2-2.2V.

Kingston HyperX 2GBx1: @800MHz=4-4-4-12, voltage at 1.8, though rated at 2V.

Edit: @Jumper118

[tbob22]

This CPU is garbage, IHS has got some problems (re-applied thermal paste 3x), and the voltages are too high for the speed.
I could lap it, but the voltages suck so I'm just getting another one and reselling.

[ProKoN]

This CPU is garbage, IHS has got some problems (re-applied thermal paste 3x), and the voltages are too high for the speed.

I could lap it, but the voltages suck so I'm just getting another one and reselling.

 

 

if your willing to take a loss i might be interested in this chip

 

that voltage looks comparable to my 5650

[tbob22]

if your willing to take a loss i might be interested in this chip

 

that voltage looks comparable to my 5650

F batch.. Never again .

I got a decent deal on it, so I'll be able to get pretty much all of it back. I don't think you want it, it's easily the worst x5670 I've seen around.

A decent x5670 should be able to hit 4.4 at those volts. Small FFTs in prime hit 85+, which is worse than my w3520 at 4.4 and that needs 1.4v. Of course if the IHS was flat it'd probably be in the low 70's.

[ProKoN]

moving into the extreme league are we?

only if i get high scores and post em on hwbot

 

no im not using the bean can. we gonna solder a pot to the heatsink. just off to get those parts

 

its a stock 775 heatsink that shipped with EE chips back in the day. its a fair bit beefier than the standard guy. much more copper\mass

 

jibs wants to build em and sell em. i think that a bad idea. we be better of doing a "how to" video and collecting google ad sense revenue Which would equate to little or nothing

 

thanks to Dildor we are a registered trademark and  patent pending

 

#whatwouldIdowithoutyou

[Jumper118]

Ai Tweaker

Ai Overclock Tuner: Manual

CPU Ratio Setting: 9.5

FSB Frequency: 465

PCIE Frequency: 100

FSB Strap to North Bridge: Auto

DRAM Frequency: DDR2-901MHz

DRAM Timing Control: Auto@5-5-5-15 (with 4-4-4-12 being manually set at 800MHz)

DRAM Static Read Control: Auto

DRAM Read Training: Auto

MEM. OC Charger: Auto

Ai Clock Twister: Auto

Ai Transaction Booster: Auto

CPU Voltage: 1.4125

CPU GTL Reference: Auto

CPU PLL Voltage: Auto

FSB Termination Voltage: Auto

DRAM Voltage: 2.20 (Xtreeme Dark maximum official rating, 2V supposed maximum for HyperX-same stock timings off 4-4-4-12 either way)

NB Voltage: Auto

SB Voltage: Auto

PCIE SATA Voltage: Auto

Load-Line Calibration: Enabled

CPU Spread Spectrum: Auto

PCIE Spread Spectrum: Auto

CPU Clock Skew: Auto

NB Clock Skew: Auto

CPU Margin Enhancement: Optimized

CPU settings

CPU Ratio Setting: 9.5

C1E Support: Disabled

Max CPUID Value Limit: Disabled

Intel Virtulization Tech: Enabled

CPU TM Function: Enabled

Execute Disable Bit: Enabled

Team Xtreem Dark 1GBx2: @800MHz=4-4-4-12, voltage at 1.8, though rated at 2-2.2V.

Kingston HyperX 2GBx1: @800MHz=4-4-4-12, voltage at 1.8, though rated at 2V.

Edit: @Jumper118

ok that is great. i'll have a proper look for you tomorrow and see what i can come up with. i got a bit carried away binning these E5200's  

 

got 4 binned tonight. i'll probably do a thread somewhere with all the results once i've binned em all. it quite quick once i get into the rhythm, but deciding what setting to use to bin them was tricky, but i think its fairly good now

[harrynowl]

ok that is great. i'll have a proper look for you tomorrow and see what i can come up with. i got a bit carried away binning these E5200's

 

got 4 binned tonight. i'll probably do a thread somewhere with all the results once i've binned em all. it quite quick once i get into the rhythm, but deciding what setting to use to bin them was tricky, but i think its fairly good now

any chance I get my hands on some good ones?

[DildorTheDecent]

only if i get high scores and post em on hwbot

no im not using the bean can. we gonna solder a pot to the heatsink. just off to get those parts

its a stock 775 heatsink that shipped with EE chips back in the day. its a fair bit beefier than the standard guy. much more copper\mass

jibs wants to build em and sell em. i think that a bad idea. we be better of doing a "how to" video and collecting google ad sense revenue Which would equate to little or nothing

thanks to Dildor we are a registered trademark and  patent pending

#whatwouldIdowithoutyou

So the new BeanCan® is the EE heastink with a pot on it? You really could pull this off if you want to sell LN2 pots. 

[Jumper118]

any chance I get my hands on some good ones?

maybe,   i've got 2 from the same batch that are much faster than the other 2 i have tested. i've looked through them all, and i've got another one from this batch as well, so i expect that will be good too. these 4 are all costa rica as well. i haven't test any Malaysia yet.

[Dabombinable]

ok that is great. i'll have a proper look for you tomorrow and see what i can come up with. i got a bit carried away binning these E5200's

 

got 4 binned tonight. i'll probably do a thread somewhere with all the results once i've binned em all. it quite quick once i get into the rhythm, but deciding what setting to use to bin them was tricky, but i think its fairly good now

Thanks, I'm just going to run everything at stock for now-tweaking everything related to the NB was a bit of a fail.

[ProKoN]

Jibs is a good neighbor to have around. he does have great idea!

 

we are in progress. gonna cost less than 30 for all parts

 

 

 

 

 

Edited February 19, 2015 by ProKoN

[rtsurfer]

Jibs is a good neighbor to have around. he does have great idea!

 

we are in progress. gonna cost less than 30 for all parts

 

 

 

 

 

 

For your sake I hope that the top part connect in a way that it doesn't leak or you are gonna have a bad day.

 

Edit:- Also hope you took care of the insulation.