Anthrax 7.0 - Mostly Whoosh With A Bit Of Sploosh

[TheProfosist]

True but to be fair, i did have that issue withe Enthoo Primo case damn UPS.

Did that happen 2-3 times with a single case and take 3 months to get resolved? >_> Oh wait this isnt resolved yet ill know tomorrow if it is as their sending me a new top again. <_<

[ericlee30]

Did that happen 2-3 times with a single case and take 3 months to get resolved? >_> Oh wait this isnt resolved yet ill know tomorrow if it is as their sending me a new top again. <_<

No I can not say it did bro, the second case came with some of the clips broken, but I kept the first case just incase something like that happened,so I could swap out parts, then RMAed the first case back to them.

 

Damn bro, I cant belive Nanoxia would take this long to help you out

[Tearass]

now your sounding like me but with out all the things breaking on you.

You do realize that im not purposely dragging it out right? I would love to finish this up ASAP. Also even if I some how managed to finish it today (near impossible) the log is actually quite a bit behind where I actually am in the build.

Last night I decided I liked the design and colors of the second one better. I tried sizing them up to 1024 but then they got too thick. I still very much like how they look though.

 

Why didn't you ask me to change that?

[TheProfosist]

No I can not say it did bro, the second case came with some of the clips broken, but I kept the first case just incase something like that happened,so I could swap out parts, then RMAed the first case back to them.

 

Damn bro, I cant belive Nanoxia would take this long to help you out

Yea lots of issues I should have just shipped it back to newegg and taken the hit and gotten the build done much sooner.

Why didn't you ask me to change that?

Because I came to that conclusion at 2-3am last night. Also I already asked you to do a bunch of changes and these are fine. I mean if its not too much work and you want to extend them to 1024 width without changing anything else I would appreciate it. If not I think they look fine.

[TheProfosist]

Update: #037

============

I thought I would share a trick I learned while doing this build with all of you. Check out the pic below and youll see that even though I plan on mounting a rad there a two fan screws in each of the fans. This holds the fans where they need to be and makes it so that you only have to worry about maneuvering the rad. Once you get half the bolts in and secured you remove the fan screws and put the rest of the bolts in. I know its something stupid simple that many of you may have already thought of but its something I have never seen anyone talk about and man did it make my life easier so I thought I would share it.

Remember to to receive continued updates automatically!

[Toxiclegend]

You do realize that im not purposely dragging it out right? I would love to finish this up ASAP. Also even if I some how managed to finish it today (near impossible) the log is actually quite a bit behind where I actually am in the build.

Of course I know you're not, you want to finish it everyone does. Just stating the fact I'm going to be sad when this log is finished, because I have been enjoying it.

[TheProfosist]

Of course I know you're not, you want to finish it everyone does. Just stating the fact I'm going to be sad when this log is finished, because I have been enjoying it.

There will be more, builds that is. Check my sig!

[TheProfosist]

Update: #038

============

I came up with a interesting tubing run for the H320 in the Air 540. I think it looks great but man was it hard to bleed.

Remember to to receive continued updates automatically!

[TheProfosist]

Update: #039

============

The correct PSU Extensions ended up making it in so I thought I would snap a quick pic. The 24 pin ATX is a 25cm rather than a 50cm and the four 6 pin PCI-E are 50cm rather than 25cm. The 8 pin CPU is not in packaging because it was the one cable that was the correct length in the original order.

Remember to to receive continued updates automatically!

[TheProfosist]

Update: #040

============

Thought I would feature the 120mm to 140mm fan adapters that im using a long with some closeups of the Noctua's mounted on them.

Remember to to receive continued updates automatically!

[euniqe]

snip

 

What's the point of this adaptor business exactly? What are you trying to achieve here?

[TheProfosist]

What's the point of this adaptor business exactly? What are you trying to achieve here?

You'll just have to wait and see I guess. I will tell you that I really love the look of noctua and black.

[Toxiclegend]

There will be more, builds that is. Check my sig!

I've been through all of them and I look forward to the next one I can tell you that much

Oh and the way you've put the tubing is pretty clever keeps the runs looking short and looks nice.

The first thing I saw on the pictures of your fans was the keyboard. I like it, think I'm gonna steal it

[TheProfosist]

I've been through all of them and I look forward to the next one I can tell you that much

Oh and the way you've put the tubing is pretty clever keeps the runs looking short and looks nice.

The first thing I saw on the pictures of your fans was the keyboard. I like it, think I'm gonna steal it

This one still has a long way to go and ChibiPC may get a cooling upgrade yet and a LED strip change. The others likely wont be anywhere near as long since but I think there will be some interesting stuff in them.

Yea the Air 540 made that relatively easy to run and I dont know many cases you could pull that off in. the way everything was oriented though made it a complete and utter pain to bleed but eventually I got all the air out.

LOL That a custom Unicomp EnduraPro. I got it because I wanted a Buckling Spring keyboard and having the track point is really handy when setting up PC's because you dont need to plug in a mouse.

[purplepenguin202]

At my school there used to be a laptop with one of those things and I would sit there the whole time and mess around with it instead of doing writing 

[ericlee30]

I'm getting antsy bro , i want to see more

[purplepenguin202]

^^^

[TheProfosist]

I'm getting antsy bro , i want to see more

What to go to work for me today so I can do just that?

[ericlee30]

What to go to work for me today so I can do just that?

LOL, I'm not working two jobs, no way in hell lol

[TheProfosist]

LOL, I'm not working two jobs, no way in hell lol

Well then I guess your just going to have to wait

[ericlee30]

Well then I guess your just going to have to wait

Damn yoooou ( fist in the air ) ok k then seats in the conner and waits quietly

[TheProfosist]

Damn yoooou ( fist in the air ) ok k then seats in the conner and waits quietly

*ROFL*

[TheProfosist]

If you guys are wondering the part that takes the longest is going through all the pictures I have for that update and choosing the ones I think best represent what I am trying to portray. Right after that though would be coming up with the titles for the updates.

[ericlee30]

If you guys are wondering the part that takes the longest is going through all the pictures I have for that update and choosing the ones I think best represent what I am trying to portray. Right after that though would be coming up with the titles for the updates.

Yeah, yeah , yeah ( fist in the air) seats back down in his loney conner and is quit again lol

[TheProfosist]

Yeah, yeah , yeah ( fist in the air) seats back down in his loney conner and is quit again lol

Hey I think the titles of the updates are worth it. I've been thinking I should really add them to the actual update somewhere though.