Jump to content

Mini ITX case suggestions?

The Average Nick
By The Average Nick
in Power Supplies
 Share
Posted

Going a bit backwards, I already have internal components from a previous build that still work, and I'm having one heck of a time finding a case that'll work. I currently have a:
750 Ti low profile video card - 5.75 x 2.72 x 1.5 inches
FlexATX PSU - Dimension: 150mm x 81.5mm x 40.5mm (5.9" x 3.21" x 1.59") - L x W x H

The goal is to use a Mini ITX mobo that already has a Noctua NH-L9x65, eight gig RAM, and go as small as possible for an emulation station.
Does anyone have suggestions on cases? Again, having a tough time finding a half height bracket for the card, as well as taking on the PSU.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Flex ATX psu's are super uncommon and you'll find it near impossible to find a commercially available case with FlexATX support. Usually those power supplies are used in rack mount cases

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, TVwazhere said:

Flex ATX psu's are super uncommon and you'll find it near impossible to find a commercially available case with FlexATX support. Usually those power supplies are used in rack mount cases

Then perchance I should be looking at used rack cases? I work in a steel mill, so I'm not afraid of cutting and riveting steel together. Only problem then is a lack of knuckle-breakers for nice bends.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
11 minutes ago, The Average Nick said:

Then perchance I should be looking at used rack cases? I work in a steel mill, so I'm not afraid of cutting and riveting steel together. Only problem then is a lack of knuckle-breakers for nice bends.

That, or use an SFX psu which is much more common to use in mITX builds

"Put as much effort into your question as you'd expect someone to give in an answer"- @Princess Luna

Make sure to Quote posts or tag the person with @[username] so they know you responded to them!

 RGB Build Post 2019 --- Rainbow 🦆 2020 --- Velka 5 V2.0 Build 2021

Purple Build Post ---  Blue Build Post --- Blue Build Post 2018 --- Project ITNOS

CPU i7-4790k    Motherboard Gigabyte Z97N-WIFI    RAM G.Skill Sniper DDR3 1866mhz    GPU EVGA GTX1080Ti FTW3    Case Corsair 380T   

Storage Samsung EVO 250GB, Samsung EVO 1TB, WD Black 3TB, WD Black 5TB    PSU Corsair CX750M    Cooling Cryorig H7 with NF-A12x25

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Power Supplies

×