Posted June 28, 2017 Hello there, what is your normal temp during mining? mine is gtx 1070 - runs at 63c (i just open the side of case) will try to use riser soon. is 63c normal to run 24/7? TY! Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 28, 2017 63c is perfectly fine. Even 70 is fine. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 28, 2017 its better to set a manual graph for your GPU using MSI Afterburner if you want to get more low temps. when i do mining with gtx 960 it stays at 60c under 100% load. Ryzen 5 3600 | MSI B450 Tomahawk Max | Corsair Vengeance lpx 32gb 3600mhz | EVGA GeForce RTX 3080 FTW3 ULTRA GAMING | XPG Core Reactor 850w Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 I have 5 GPUs and they are never above 73C. I have two external fans blowing air from above them to cool them and limit the fans spinning... 4 1060s and a 1070. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 My 1080 hybrid runs at 58c at full load. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 Author hi guys, so anything below 70c is still safe? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 3 hours ago, Ranz said: hi guys, so anything below 70c is still safe? Yah, I would say even up to the middle to upper 70s is fine. Current Network Layout: Current Build Log/PC: Prior Build Log/PC: Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 EVGA 980 ti Hybrid 50C EVGA 1050 ti SSC 53C Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 I run it at about 60C, I could go a good bit lower but my fans are basically silent now (1060 Armor). I'm running about 55%to 60% power usage while mining (about 70w!) with a heavy memory OC and a good undervolt and slight downclock on the core That's an F in the profile pic Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 Author 2 hours ago, Froody129 said: I run it at about 60C, I could go a good bit lower but my fans are basically silent now (1060 Armor). I'm running about 55%to 60% power usage while mining (about 70w!) with a heavy memory OC and a good undervolt and slight downclock on the core Mining on 55% power usage means lower profit? or it does not affect? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 52 minutes ago, Ranz said: Mining on 55% power usage means lower profit? or it does not affect? Boosting my memory clock gave me a substantial boost over stock and my low core voltage (core is still 1923MHz) means that my card is silent and cool as a cucumber while not stressing the card as much That's an F in the profile pic Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 Author 1 minute ago, Froody129 said: Boosting my memory clock gave me a substantial boost over stock and my low core voltage (core is still 1923MHz) means that my card is silent and cool as a cucumber while not stressing the card as much but turning the power usage down will do harm to my gpu? yesterday i was trying to tweak and i set the core to -400 the the memory to +700ish then the power usage to about 60% and i got an artifacts. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted June 29, 2017 1 minute ago, Ranz said: but turning the power usage down will do harm to my gpu? yesterday i was trying to tweak and i set the core to -400 the the memory to +700ish then the power usage to about 60% and i got an artifacts. That simply means your mem clock was too high. I left my power limit on 100% and manually told the card what voltage and clocks to run. Hit ctrl+F in your OC software That's an F in the profile pic Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now