How to fix failed monitor overclock?

[RGProductions]

So it seems that all this monitor BS will never end, and I was going to type in 75 hz for my monitor, which supports it fully, and accidentally typed 85. a know how i can get windows to boot in like 60hz or something so I can fix this? No image shows on the monitor.

[RGProductions]

or anything

can someone help

broken my monitor setup 5 times in 4 days

freaking out here

this is the last one

[Energycore]

Never tried anything like it sorry

Tried to OC a VGA monitor on EVGA PrecisionX, it didn't like it but I was able to revert by just waiting IIRC

[Megah3rtz]

It should've reset to normal if you didn't hit confirm. 

[RGProductions]

2 minutes ago, Megah3rtz said:

It should've reset to normal if you didn't hit confirm. 

here's the thing, I did. Now I can't get it to even boot into windows.

[Megah3rtz]

1 minute ago, RGProductions said:

here's the thing, I did. Now I can't get it to even boot into windows.

Use a different monitor and delete the profile? 

[RGProductions]

1 minute ago, Megah3rtz said:

Use a different monitor and delete the profile? 

that might just work, but I don't have another one, i broke them all.

EDIT: Nope, I do have an old CRT which would actually, ironically enough, be stable at 90hz

[Megah3rtz]

1 minute ago, RGProductions said:

that might just work, but I don't have another one, i broke them all.

EDIT: Nope, I do have an old CRT which would actually, ironically enough, be stable at 90hz

alternatively, can you get into the bios at all? Or windows safe mode? 

[RGProductions]

Just now, Megah3rtz said:

alternatively, can you get into the bios at all? 

yes, which would be much easier than carting a really heavy CRT up here.

[Megah3rtz]

Just now, RGProductions said:

yes, which would be much easier than carting a really heavy CRT up here.

edited comment 

1 minute ago, Megah3rtz said:

Or windows safe mode? 

 

[RGProductions]

1 minute ago, Megah3rtz said:

 

No idea how to enter safe mode in 10

[Megah3rtz]

4 minutes ago, RGProductions said:

No idea how to enter safe mode in 10

I think you'll need a recovery flash drive or disc if you can't boot into windows. 

[RGProductions]

1 minute ago, Megah3rtz said:

I think you'll need a recovery flash drive or disc if you can't boot into windows. 

Trying the old CRT now

[RGProductions]

Alright I fixed it. I used the old CRT and reset all settings in CRU. I should've paid attention and when the OC failed, just pressed f8. Thanks guys.