Post your Cinebench R20+15+R11.5+2003 Scores **Don't Read The OP PLZ**

[Jumper118]

i need to update this today. i have a few scores to put on from i3 6320

[iHardware Shelden]

6 minutes ago, Jumper118 said:

i need to update this today. i have a few scores to put on from i3 6320

Don't update your BIOS

[iHardware Shelden]

Pentium 4 630 @ 3.7Ghz 1.32v

 

 

I opened the RAM tab and yea the timing are all weird although being 9-9-9-24 @ 1.5v manual in the bios... :L

[iHardware Shelden]

@agent_x007 now we just need to get you and your Pentium Extreme Edition a Titan X

[agent_x007]

@iHardware Shelden I think fully unlocked Big Pascal would be better
Sadly, my Pentium 4 Extreme Edition 3,46GHz doesn't support DirectX 12 (no NX-bit, no 64-bit ).

[Jumper118]

 

   

[ProKoN]

under the dice pot

[iHardware Shelden]

@ProKoN Wow.... I am speechless O_O 

[iHardware Shelden]

So I found my 820 and as a punishment for being lost for the past however many years this is what I did 

 

 

 

 

Note the Friday video is at that time stamp because I wanted that still shot, both videos were just over 27min when the benchmark stopped.

 

Happy 11th Birthday 820 

 

[LoreBeast]

On a asus p8z77-v lx with Gig Corsair Vengeance 2400 mhz ram and a STOCK intel cooler. Getting temps of 99 Degrees!!!! and its sable 

[Jumper118]

such trolling occurred before i managed to get over 900cb 

[iHardware Shelden]

So my 820 is a little voltage monster and bad overclocker so I just left it at stock, still much better than when I punished it

 

 

2.8Ghz @ 1.3v

[iHardware Shelden]

1 minute ago, Jumper118 said:

such trolling occurred before i managed to get over 900cb

Oh my, you might make people cry with that voltage  

[Jumper118]

5 minutes ago, iHardware Shelden said:

Oh my, you might make people cry with that voltage  

why? it was on phase 1.7v is fine. load temps were about 6c max with no delid. 

7 minutes ago, iHardware Shelden said:

So my 820 is a little voltage monster and bad overclocker so I just left it at stock, still much better than when I punished it

 

 

 

2.8Ghz @ 1.3v

why are you using the g41 board again instead of the 780i? that g41 vrm with get set on fire by a pentium d

[agent_x007]

So, a CPU that in theory does not support 400 MHz RAM, when there are 4 memory sticks in use (official support up to 333MHz). 
How far can it go in practice ?
Answer : Quite far

PS. @Jumper118 :
FX-62 requires AM2/AM2+ socket,

[harrynowl]

45 minutes ago, iHardware Shelden said:

So my 820 is a little voltage monster and bad overclocker so I just left it at stock, still much better than when I punished it

 

 

2.8Ghz @ 1.3v

on the 780i?

[iHardware Shelden]

1 hour ago, harrynowl said:

on the 780i?

 

1 hour ago, Jumper118 said:

why? it was on phase 1.7v is fine. load temps were about 6c max with no delid. 

why are you using the g41 board again instead of the 780i? that g41 vrm with get set on fire by a pentium d

780i hit the can for good when I tried to overclock the E5300 and E6850 they were not even stable at stock and was getting random errors in windows so I just called it quits on that.

 

Also I assume that 1.7 was fine but I was saying that most people appear to assume that anything more than 1.3 will kill a skylake chip  

[iHardware Shelden]

Look what you made me do to my desktop board @Jumper118 and @harrynowl

 

 

Both of my nice 775 boards are either dead or almost dead :L See if this brings it back to life but I doubt it.

[agent_x007]

Mom always told me :
DO NOT overvolt Pentium D 8xx CPU's, without proper cooling on it, and adequate VRM quality on MB.

Here's video of what OC'ed PXE 840 can do... didn't tested it in Cinebench 
Actual games are more fun 

 

[iHardware Shelden]

10 hours ago, agent_x007 said:

Mom always told me :
DO NOT overvolt Pentium D 8xx CPU's, without proper cooling on it, and adequate VRM quality on MB.

Here's video of what OC'ed PXE 840 can do... didn't tested it in Cinebench 
Actual games are more fun 

 

The 780i booted with the P4 630, as for the 820 and 945 I plan on pumping 1.4v into those suckers tonight, VRM cooling is good with this board on the test bench as for the CPU it might get just a little toasty  

[Jumper118]

5 hours ago, iHardware Shelden said:

The 780i booted with the P4 630, as for the 820 and 945 I plan on pumping 1.4v into those suckers tonight, VRM cooling is good with this board on the test bench as for the CPU it might get just a little toasty

good, its a much better board :). 

[iHardware Shelden]

11 minutes ago, Jumper118 said:

good, its a much better board :). 

Still confuses me how I got a better overclock on the g41 board with the E5300 than I did on the 780i, I hope it was just me being stupid when overclocking it but who knows. Hopefully I can get a decent overclock on the Pentium 4 chips and Pentium D now since they seem to work  

[agent_x007]

On 24.01.2016 at 1:17 AM, Jumper118 said:

On 24.01.2016 at 1:47 AM, agent_x007 said:

But, when I stop playing around with FX-60, I can give it a try @ ~2,94GHz

you going to cinebench that one as well? i have the FX-55 and the FX-57 but those FX-60 are so expensive and very hard to find now. 

Well I did give it a try 
2003 :


R11.5 : 

Can't do Cinebench R15, since it requires SSE3 support (and that means... Athlon64 90nm or newer ).

But before switching to FX-55 I sqeezed some more from FX-60
2003 : 


R11.5 :


R15 :

[Jumper118]

[karlpiuemeno]

Asus Z170-A
Seasonic G-650
CoolerMaster Hyper 212 Evo
Core i5 Skylake @ 4.8 GHz
Corsair DDR4 LPX 3000 @ 3200 MHz

What do you think?