Jump to content

NEED HELP FURY X PERFORMING WORSE THAN HD5450

i respawn.
 Share
Posted

So i just bought my new rig:

6700k, 16GB @2400MHz, Sapphire Fury x,MSI Z170A gaming M3, Toshiba 1TB, zotac 120GB, thermaltake toughpower gold 80+ 650w, cm inwin midtower,vx-229.I have crimson 15.3 installed and when i run far cry primal, no matter on what settings (i tried 4K VSR on high, 1080p on ultra, high and LOW) and every time i get around 15-17 fps.According to hw monitor the clock speeds don't go above 500MHz anytime.So, what's the deal?did they install a potato gpu inside my fury x?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Newest driver version for Crimson is 16.4 so try updating to that

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, JoeyDM said:

Step 1: Do you have drivers?

I have crimson 15.3 installed

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, brickster said:

Newest driver version for chrimson is 16.4 so try updating those

but isn't it supposed to work on the old ones as well?

anyway i'll try

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, i respawn. said:

but isn't it supposed to work on the old ones as well?

anyway i'll try

it should but i'm pretty sure 15.3 wasn't out after Far Cry Primal came out.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, brickster said:

it should but i'm pretty sure 15.3 wasn't out after Far Cry Primal came out.

so that's the problem?anyway i'm trying to installl 16.4 now

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, i respawn. said:

so that's the problem?

We don't know. Just going through troubleshooting steps. It could potentially maybe be the problem.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, sapphirethunder said:

Just for clearance....are you sure you have the monitor plugged on Fury X and not on motherboard.

yes.... there are 3 display ports and one HDMI on the left....i connected to the HDMI.wait, wait, that is called the gpu, right?below the audio jacks?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
7 minutes ago, i respawn. said:

yes.... there are 3 display ports and one HDMI on the left....i connected to the HDMI.wait, wait, that is called the gpu, right?below the audio jacks?

Is it like a line with video ports?

 

20160407_160210.jpg

Athlon X2 for only 27.31$   Best part lists at different price points   Windows 1.01 running natively on an Eee PC

My rig:

Spoiler

Celeronator (new main rig)

CPU: Intel Celeron (duh) N2840 2.16GHz Dual Core

RAM: 4GB DDR3 1333MHz

HDD: Seagate 500GB

GPU: Intel HD Graphics 3000 Series

Spoiler

Frankenhertz (ex main rig)

CPU: Intel Atom N2600 1.6GHz Dual Core

RAM: 1GB DDR3-800

HDD: HGST 320GB

GPU: Intel Graphics Media Accelerator (GMA) 3600

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Djole123 said:

Is it like a line with video ports?

I think he was being partly sarcastic there.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, Djole123 said:

Is it like a line with video ports?

Oh my god -_- that was sarcasm.Yes, it is connected to the gpu :3 as i said i had crimson 15.3 installed and all the hardware matched properly.now i am downloading 16.4.1 (i think it's gonna take 30 minutes in my 2 mbps line :3 )

 

Edit:*30 days

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, sapphirethunder said:

I think he was being partly sarcastic there.

Exactly xD

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
4 minutes ago, sapphirethunder said:

I think he was being partly sarcastic there.

Actually no but I suck at explaining.

 

:(

 

pls ignore me. imma go to my room

Athlon X2 for only 27.31$   Best part lists at different price points   Windows 1.01 running natively on an Eee PC

My rig:

Spoiler

Celeronator (new main rig)

CPU: Intel Celeron (duh) N2840 2.16GHz Dual Core

RAM: 4GB DDR3 1333MHz

HDD: Seagate 500GB

GPU: Intel HD Graphics 3000 Series

Spoiler

Frankenhertz (ex main rig)

CPU: Intel Atom N2600 1.6GHz Dual Core

RAM: 1GB DDR3-800

HDD: HGST 320GB

GPU: Intel Graphics Media Accelerator (GMA) 3600

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, i respawn. said:

Exactly xD

U don't buy a PC with this much money if you can't connect HDMI cable to gpu.you buy consoles then ;)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, i respawn. said:

U don't buy a PC with this much money if you can't connect HDMI cable to gpu.you buy consoles then ;)

Actually, it wouldn't be a first time a total newbie to pcs buys top of the line stuff and then fails at connecting monitor to right gpu lol

Or person just accidentally, without thinking, plugs it in integrated instead of discrete because of being tired or so.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Wait this is not a PSU issue right?I remember somewhere 750w was recommended or something?i don't think so.is it?just being sure

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, i respawn. said:

Wait this is not a PSU issue right?I remember somewhere 750w was recommended or something?i don't think so.is it?just being sure

650W is plenty for 6700k + Fury X so Wattage isn't a problem.

However, I don't think Thermaltake Toughpower PSUs are the best quality. And even if they are fine enough in quality, maybe you got defective piece.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
Just now, sapphirethunder said:

650W is plenty for 6700k + Fury X so Wattage isn't a problem.

However, I don't think Thermaltake Toughpower PSUs are the best quality. And even if they are fine enough in quality, maybe you got defective piece.

woah what you are telling me it's because of my psu?anyway i heard tt is good enough....if it's a defected one hopefully i will get a replacement for warranty.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, sapphirethunder said:

650W is plenty for 6700k + Fury X so Wattage isn't a problem.

However, I don't think Thermaltake Toughpower PSUs are the best quality. And even if they are fine enough in quality, maybe you got defective piece.

Good point right there, Fury X is probably throttling because there is not enough juice.

Athlon X2 for only 27.31$   Best part lists at different price points   Windows 1.01 running natively on an Eee PC

My rig:

Spoiler

Celeronator (new main rig)

CPU: Intel Celeron (duh) N2840 2.16GHz Dual Core

RAM: 4GB DDR3 1333MHz

HDD: Seagate 500GB

GPU: Intel HD Graphics 3000 Series

Spoiler

Frankenhertz (ex main rig)

CPU: Intel Atom N2600 1.6GHz Dual Core

RAM: 1GB DDR3-800

HDD: HGST 320GB

GPU: Intel Graphics Media Accelerator (GMA) 3600

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, i respawn. said:

woah what you are telling me it's because of my psu?anyway i heard tt is good enough....if it's a defected one hopefully i will get a replacement for warranty.

Well, I just checked the PSU tier listing, and Toughpower Gold is Tier 2, made by Enhance, so it's fine.

But who knows, maybe the rail that gives power to PCI-E, is a bit defective.

 

Though I doubt that.

 

Maybe something in BIOS or driver settings.

Ah and btw: what clock speed it showed as 500Mhz?

Because the HBM1 in Fury X is operating at 500Mhz.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, i respawn. said:

woah what you are telling me it's because of my psu?anyway i heard tt is good enough....if it's a defected one hopefully i will get a replacement for warranty.

Nobody is trying to tell you anything other than possibilities :) it could possibly be PSU. It could possibly be drivers. It could possibly be the GPU. Hell, it could possibly be the mobo.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Djole123 said:

Good point right there, Fury X is probably throttling because there is not enough juice.

Unless the power supply is really really bad probably not. Lets wait for the drivers and then check the temperatures.

If you want to reply back to me or someone else USE THE QUOTE BUTTON!                                                      
Pascal laptops guide

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×