Something to raise case from carpet

[ignorethisone]

Hello.I have recently completed a PC build and am currently keeping my case under my table on a carpeted floor. I have no room on the table, because it is a corner desk with built in shelves and barely allowes room for my 27" desk. Is there any device (small shelf, wodden plank, etc) that I can purchase or make (money is no major issue but I want save where I can) that will raise my case (nzxt h440) a few inches higer off the carpet.

*I also do Care about how it looks.. A scrap ugly price of wood won't do. Hopefully it can add more functionality to my desk area (storage etc).

thanks in advane

[AlwaysFSX]

Get a piece of wood and stain + coat it?

[KayTees]

Theres this cart looking thing that sits on the bottom of the desk and its on wheels.... Don't really know what it's called.

[ignorethisone]

Get a piece of wood and stain + coat it?

hmm. I'm not even decent with any types of paint. Another idea I had was going to IKEA and checking out their shelving units. They often sell peices seperatly and I might be able to get a nice peice of wood or something

[Statik]

Two options.

 

OPTION A:

 

Go to nearest hardware store and buy a sheet of either either spruce, birch, etc ply, or a sheet of fir good one side, if you got the bills (some stores might have smaller take home panels (i.e. 2x4 or 4x4, but they will have a bullshit markup).

 

Find a stain similar to your desk (assuming it's a wooden desk), or just get a clear varnish, etc and stain the sheet. Place it on the ground, attach to desk if desired. Tada.

 

OPTION 2:

 

Complete option a, but make sure you get a full sheet of ply, and make an addition onto your desk.

 

 

EDIT: It appears you don't want to stain.

 

Im sure you can find a small piece of white MDF somewhere, and just cut it out into a square slightly larger than your PC, plop it on that, or even attach it to desk, etc.

[AlwaysFSX]

hmm. I'm not even decent with any types of paint. Another idea I had was going to IKEA and checking out their shelving units. They often sell peices seperatly and I might be able to get a nice peice of wood or something

It's really easy to do, just follow instructions for it and you can't really mess it up.

[ignorethisone]

Two options.

 

OPTION A:

 

Go to nearest hardware store and buy a sheet of either either spruce, birch, etc ply, or a sheet of fir good one side, if you got the bills (some stores might have smaller take home panels (i.e. 2x4 or 4x4, but they will have a bullshit markup).

 

Find a stain similar to your desk (assuming it's a wooden desk), or just get a clear varnish, etc and stain the sheet. Place it on the ground, attach to desk if desired. Tada.

 

OPTION 2:

 

Complete option a, but make sure you get a full sheet of ply, and make an addition onto your desk.

 

 

EDIT: It appears you don't want to stain.

 

Im sure you can find a small piece of white MDF somewhere, and just cut it out into a square slightly larger than your PC, plop it on that, or even attach it to desk, etc.

Thank you for a detailed reply I was actually just looking at the IKEA website and found smaller versions of the desk I bought! I may be able to purchase one of those or a side unit that perfectly matches my desk!http://m.ikea.com/ca/en/catalog/series/17499/