Posted October 17, 2014 Wera Kraftform Kompakt 27 RA Slotted Ratcheting Screwdriver I work in the slot machine industry, which are basically big PC's inside a much bigger chassis with more mechanical parts. 7 months ago, I started doing research into what would be the best ratcheting screwdriver I could find which could hold multiple bits. I'm CONSTANTLY using phillips #1, phillips #2, phillips #0, all manner of socket sizes standard and mm, a few flatheads and sometimes torx head screws and bolts. Every day I use this screwdriver and it has held up to the abuse, grime, and dust this job entails. The ratcheting action is very fine-tooth, the handle is comfortable, and the bits are very well machined to fit screwheads precisely. It has a very strong magnetic tip, allowing it to double as a pick-up tool if need be. Although some are worried about the magnet harming components inside of a pc, I haven't had one single problem yet. Then again, I don't usually bang the tip against PCB or anything that's live. It can be found on Amazon for about $20 less than the Snap-On screwdriver I see recommended here often. If you're serious about building PC's, and plan on building a LOT of them, buy this. It's worth it. http://www.amazon.com/Wera-Kraftform-Kompakt-Ratcheting-Screwdriver/dp/B004VMWYCU/ref=pd_sim_indust_12?ie=UTF8&refRID=074H62X2C3H1K5NC5W97 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 Awesome great recommendation UK Link - £35 (or 56$ ffs) http://www.amazon.co.uk/Wera-05073660001-Kraftform-Kompakt-KK27/dp/B004CJ8MDW Desktop - Corsair 300r i7 4770k H100i MSI 780ti 16GB Vengeance Pro 2400mhz Crucial MX100 512gb Samsung Evo 250gb 2 TB WD Green, AOC Q2770PQU 1440p 27" monitor Laptop Clevo W110er - 11.6" 768p, i5 3230m, 650m GT 2gb, OCZ vertex 4 256gb, 4gb ram, Server: Fractal Define Mini, MSI Z78-G43, Intel G3220, 8GB Corsair Vengeance, 4x 3tb WD Reds in Raid 10, Phone Oppo Reno 10x 256gb , Camera Sony A7iii Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 Awesome, I have been shopping around for one for a while but wasn't too sure what to go for. Thanks for this. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 Does it come in blue? "I genuinely dislike the promulgation of false information, especially to people who are asking for help selecting new parts." Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 Author Does it come in blue? Unfortunately, no. Wera seems to use green as its branding. You could probably paint it blue if you really wanted, I suppose. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 Does it come in blue? Could be worse, would you prefer it was Noctua brown? Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 I prefer one from Milwaukee Tools that can take the extensions I put on my drill. I actually did a post on all the stuff I used one time... UPDATED An enthusiasts guide to video feat. MPC-HC + madVR | NEW UPDATE Supertower Build Log: Anthrax 8.0 ~ 02/21 - Follow! Build Logs: Anthrax (2016.02.14) | Chibi PC (2014.09.22) | ThePylon (2015.10.26) | Mystery Build #4 (????.??.??) | Mystery Build #5 (????.??.??) The HID Liberator: A Cherry MX Mechanical Keyboard Build Log | A Simple Mod: Silencing the EVGA 750Ti FTW w/ ACX Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 17, 2014 Could be worse, would you prefer it was Noctua brown? That would actually be really cool. I'd get one if it was Noctua themed. If you ever need help with a build, read the following before posting: http://linustechtips.com/main/topic/3061-build-plan-thread-recommendations-please-read-before-posting/Also, make sure to quote a post or tag a member when replying or else they won't get a notification that you replied to them. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 18, 2014 That would actually be really cool. I'd get one if it was Noctua themed. NEW PC build: Blank Heaven minimalist white and black PC Old S340 build log "White Heaven" The "LIGHTCANON" flashlight build log Project AntiRoll (prototype) Custom speaker project Spoiler Ryzen 3950X | AMD Vega Frontier Edition | ASUS X570 Pro WS | Corsair Vengeance LPX 64GB | NZXT H500 | Seasonic Prime Fanless TX-700 | Custom loop | Coolermaster SK630 White | Logitech MX Master 2S | Samsung 980 Pro 1TB + 970 Pro 512GB | Samsung 58" 4k TV | Scarlett 2i4 | 2x AT2020 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 18, 2014 I have 2 ratchet screw drivers, imo they're okay, but the constant setting of the ratchet direction for installing and removing screws can be annoying at times. So I went back to a standard screw driver with magnetic bits. Also got snake driver attachment that can be used with both my manual and auto screwdrivers, handy at times when it's needed for those tight to reach places, a regular screw driver can't. Might get myself one of them auto loading screw driver. http://www.amazon.com/KR-Tools-12609-Auto-Loading-Screwdriver/dp/B001NPDJI6/ref=sr_1_1?ie=UTF8&qid=1413656931&sr=8-1&keywords=AUTO+LOADING+screw+driver#customerReviews Intel Xeon E5 1650 v3 @ 3.5GHz 6C:12T / CM212 Evo / Asus X99 Deluxe / 16GB (4x4GB) DDR4 3000 Trident-Z / Samsung 850 Pro 256GB / Intel 335 240GB / WD Red 2 & 3TB / Antec 850w / RTX 2070 / Win10 Pro x64 HP Envy X360 15: Intel Core i5 8250U @ 1.6GHz 4C:8T / 8GB DDR4 / Intel UHD620 + Nvidia GeForce MX150 4GB / Intel 120GB SSD / Win10 Pro x64 HP Envy x360 BP series Intel 8th gen AMD ThreadRipper 2! 5820K & 6800K 3-way SLI mobo support list Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 18, 2014 @NumLock21 that thing is huge and probably super heavy UPDATED An enthusiasts guide to video feat. MPC-HC + madVR | NEW UPDATE Supertower Build Log: Anthrax 8.0 ~ 02/21 - Follow! Build Logs: Anthrax (2016.02.14) | Chibi PC (2014.09.22) | ThePylon (2015.10.26) | Mystery Build #4 (????.??.??) | Mystery Build #5 (????.??.??) The HID Liberator: A Cherry MX Mechanical Keyboard Build Log | A Simple Mod: Silencing the EVGA 750Ti FTW w/ ACX Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 19, 2014 @NumLock21 that thing is huge and probably super heavy Not really, my friend has one. Intel Xeon E5 1650 v3 @ 3.5GHz 6C:12T / CM212 Evo / Asus X99 Deluxe / 16GB (4x4GB) DDR4 3000 Trident-Z / Samsung 850 Pro 256GB / Intel 335 240GB / WD Red 2 & 3TB / Antec 850w / RTX 2070 / Win10 Pro x64 HP Envy X360 15: Intel Core i5 8250U @ 1.6GHz 4C:8T / 8GB DDR4 / Intel UHD620 + Nvidia GeForce MX150 4GB / Intel 120GB SSD / Win10 Pro x64 HP Envy x360 BP series Intel 8th gen AMD ThreadRipper 2! 5820K & 6800K 3-way SLI mobo support list Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 20, 2014 Author I prefer one from Milwaukee Tools that can take the extensions I put on my drill. I actually did a post on all the stuff I used one time... Wera makes a version of the screwdriver I linked that does just that: http://www.amazon.com/Wera-05051024002-Kraftform-Bitholding-Screwdriver/dp/B001HSNHM2/ref=pd_sim_indust_6?ie=UTF8&refRID=1DNFENV5J2X51TFJVW90 Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Posted October 20, 2014 Author I have 2 ratchet screw drivers, imo they're okay, but the constant setting of the ratchet direction for installing and removing screws can be annoying at times. So I went back to a standard screw driver with magnetic bits. Also got snake driver attachment that can be used with both my manual and auto screwdrivers, handy at times when it's needed for those tight to reach places, a regular screw driver can't. Might get myself one of them auto loading screw driver. http://www.amazon.com/KR-Tools-12609-Auto-Loading-Screwdriver/dp/B001NPDJI6/ref=sr_1_1?ie=UTF8&qid=1413656931&sr=8-1&keywords=AUTO+LOADING+screw+driver#customerReviews The screwdriver I linked has a setting that allows you to use it in regular form. I actually find myself using it most of the time at work, as the ratcheting mostly comes in handy when I'm in a very tight space and can't move my hand much. Link to comment Share on other sites More sharing options... Link to post Share on other sites More sharing options...
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now